Product characteristic:
one. Stator measurement is optional
2. Protected, trustworthy, lower sounds, very good commencing, lengthy existence
3. Strong energy
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Common utilized:
Compact higher-performance admirer motor utilised on Refrigerator, Ice Chest, Condensing plant, Ventilator And so forth
1. Stator dimension: 82*25mm
two. Speed: 1750RPM
3. Safe, trustworthy, minimal sounds, good starting up, prolonged existence
Voltage(V): one hundred ten-240
Frequency: fifty/60Hz
Existing(A): .75
Enter Power: 70W
Torque: 100mN. M
Shaft diameter(mm)=4-6mm
Shaft length(mm)=in accordance to customer’s necessity
Pace(r/min)=in accordance to customer’s prerequisite
Current(A)=according to customer’s requirement
Input energy(W)=according to customer’s requirement
Model | STATOR Dimension | SHAFE DIA | VOLT | Input Electricity | TORQUE (g.cm) | Velocity RATED |
YJ8213 | 13mm | 5mm | a hundred and ten-240V | 40W | eighty.51mN.m | 1550RPM |
YJ8216 | 16mm | 6mm | 110-240V | 50W | 85.82mN.m | 1500RPM |
YJ8219 | 19mm | 7mm | one hundred ten-240V | 65W | 100mN.m | 1650RPM |
YJ8225 | 25mm | 7mm | 110-240V | 70W | 118mN.m | 1750RPM |
YJ8230 | 30mm | 8mm | one hundred ten-240V | 85W | 150mN.m | 1800RPM |
ABOUT US
Ritscher group was set up in 2006.we constantly emphasis on micro-motors for household electrical appliance and sector appliance considering that placing up.currently we have two professional micro-motor factories in China which severally located in HangCZPT city and HangCZPT town.it has an location of 25,000 sq. meters vegetation and much more than three hundred employees, yearly output is three million pcs and has five million pcs yearly generating capability.right after many a long time advancement,we had developed a wonderful reputation in the market place and received far more and more customers’ trust in the world.
We started from shaded pole motors at commencing, up to now,our merchandise included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our merchandise are widely employed for making fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage devices and several other equipments.
As a realiable top quality warranty,Ritscher has complete R&D departement,QC division,making division,purchase section and so on. has best creating equipment like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, CZPT injection molding and so forth. also check/ detection system like multiplex temp measuring gadget, functionality parameter inspection system, Phenol peptide solution pinhole tester,Anechoic place and many others.
Endeavoring to offer the ideal product and provider to customers,we always do the most energy to become an outstanding company of micro motors.
Ritscher is usually inclined to build sincere company connection with pals from all in excess of the world.
Welcome make contact with with us!
Just take ritscher ,get pleasure from modern day life!
Our firm FAQ for you
(1) Q: What variety motors you can give?
A:For now,we primarily give Kitchen Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Fridge Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so forth.
(2) Q: Is it possible to check out your manufacturing unit
A: Sure. But remember to kindly hold us posted a couple of days in progress. We want to examine our
plan to see if we are CZPT then.
(three) Q: Can I get some samples
A: It is dependent. If only a couple of samples for individual use or alternative, I am scared it will
be hard for us to provide, because all of our motors are custom created and no stock
CZPT if there is no further wants. If just sample tests before the formal order and
our MOQ, cost and other terms are satisfactory, we would enjoy to offer samples.
(four) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is in between one thousand~ten,000pcs for different types soon after sample acceptance.
But it really is also all right for us to take more compact heaps like a few dozens, hundreds or countless numbers
For the initial 3 orders soon after sample approval.For samples, there is no MOQ need. But the much less the far better (like no much more than 5pcs) on situation that the amount is sufficient in circumstance any alterations necessary after initial tests.