This device characteristics:
The equipment is nicely-assembled and assembled with reasonable appearance and reasonable construction. The entire machine runs smoothly and has lower noise. The PLC double servo traction management is adopted, so that the components on the discharge and the elevated frame are constantly pulled CZPT by the 3rd traction motor at a continual velocity. Temperature computer centralized handle lowers energy intake. The intermediate stress floating roller adopts the dynamic payment manner, so that it fluctuates up and down during the pulling procedure, and the intermediate tension management is stable.
Device perform: 3 side sealing
Principal electrical configuration: traction two servo motor, with Panasonic PLC, primary travel inverter travel Circulation motor, temperature management fourteen way, unwinding continual pressure.
Suitable for base components: plastic composite movie this sort of as BOPP, CPP, PET, PVC, nylon, etc.
Multi-layer co-extruded film, aluminized composite film, paper-plastic composite film, pure aluminum foil composite film.
Mechanical highest beat: 150 occasions / min
Proportions: 9000 × 1900 × 1950 mm (duration × width × height)
Machine excess weight: 5800KGS
|Traction component||Traction motor||1KW,1.5KW||2sets||Panasonic|
|Pneumatic Components||ZheJiang Airtac|
|Major drive segment||reducer||1:13||1set||German SEW|
|Contact screen||ten.2inch||1set||ZheJiang weinview|
|Strong Relay||12pcs||ZheJiang MIRO|
|Magnetic powder brake||2.five||1set||ZheJiang|
|Main manage cabinet||CZPT photocell||1set||China|
|CZPT element||Joint bearing||Korea|
|Photoelectric tracking area||photocell||1pc||Italy|