China Factory Vibrating Screed Concrete Vibration Motor

China Factory Vibrating Screed Concrete Vibration Motor

Very hot promote !  External  Concrete vibrator  0.75KW/1.1KW/one.5KW/2.2KW
Solution Makes use of:
  The Exterior concrete vibrator uses of the vibrator are on the vibrating desk,brick making device, and vibrating display to offer vibrating motion. It also cancomes with a foundation plate. It is typically witnessed on moderm development internet sites. Exactly where it is mainly employed to consolidate the confront of freshly-poured concrete foundation as properly as compact the surface area of pre-cast concrete .


1. Attachment concrete vibrator is produced up of rotor axles of solitary phase, a few-section Asynchronous motor set up eccentric blocks matching with motor power on Equally sides.

2. The total machine has performances of total closing and higher power, convenient To dismantle, set up and preserve. Quad rubber cable consists of electric Wire.

3. The husk of a full machine is totally manufactured of aluminum alloy with lightness And high energy. The caps of two ends are immediately pieced collectively tightly with three Lengthy bolts, which are fairly fixed.


Product External vibrator
Product ZW-15 ZW-35 ZW-70 ZW-ninety ZW-a hundred
Electrical power (KW) .55KW .75KW one.5KW two.2KW 3.0KW
Speed(RPM) 2840 2840 2840 2840 2840
Centrifugal Pressure 350 350 seven-hundred 980 1100
Voltage (V) 380/forty two 380/42 380/42 380/42 380/forty two
Frequency (HZ) fifty/sixty fifty/sixty 50/60 50/60 50/60
Bodyweight (KGS) 11 13 19.2 28.eight 31
Packing dimensions (CM) 33*19*22.5 33*19*22.five 42*22*25 48.5*26.five*28  


China Factory Vibrating Screed Concrete Vibration Motor