We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
FRP centrifugal pumps are primarily utilised in petrochemical, smelting, dyes, printing and dyeing, pesticides, prescription drugs, unusual earths, fertilizers and EPT industries. They transport different non-oxidizing acids (hydrochloric acid, exceptional) that do not have strong particles and are not effortless to crystallize. The temperature is not greater than 100 °C. Ideal tools for corrosive media this kind of as sulfuric acid, formic acid, acetic acid, butyric acid.
FS horizontal glass metal centrifugal pump characteristics
The FS horizontal glass fiber reinforced plastic centrifugal pump has a straightforward and sensible structure, higher degree of standardization, versatility of components, powerful interchangeability, and handy disassembly and overhaul. The components in contact with the medium are created of polyvinyl butyral modified phenolic glass fiber and phenolic glass metal elements which are fashioned by high temperature molding. The item has exceptional properties these kinds of as light-weight bodyweight, higher strength, no deformation, temperature resistance and corrosion resistance. In the aspect of anti-corrosion, it can partially replace cherished meta EPT these kinds of as aluminum-made up of stainless steel, titanium and titanium alloy. Shaft seal: WB2 variety exterior F4 corrugated mechanical seal, trustworthy sealing functionality and lengthy support life. Pump generate and direction of rotation: The pump is driven by a claw-type EPT that is pushed right by the motor, and the pump rotates clockwise as considered from the motor stop.
FS horizontal glass steel centrifugal pump item use
FRP centrifugal pumps are mostly employed in petrochemical, smelting, dyes, printing and dyeing, pesticides, prescription drugs, rare earths, fertilizers and EPT industries. They transport a variety of non-oxidizing acids (hydrochloric acid, rare) that do not include sound particles and are not straightforward to crystallize. The temperature is not greater than one hundred °C. Best products for corrosive media such as sulfuric acid, formic acid, acetic acid, butyric acid.
Set up, use and servicing
1. FS kind FRP centrifugal pump is set up according to the picked pump kind in accordance to the picked pump sort, according to the form and installation dimension. In accordance to the requirements of the pipeline placement, the set up spot is convenient to manage and maintain.
2. If the placement of the pump human body of the FS type FRP centrifugal pump is greater than the liquid amount, a liquid filling system mu EPT be attached.
3. Before the FS type FRP centrifugal pump starts to fill the pump body with the liquid, it is strictly prohibited to run and reverse the medium. Otherwise, the pump body will injury the mechanical seal due to the lack of liquid cooling.
four. When stopping, switch the liquid pipe valve to avoid backflow of liquid.
five. When fixing, fir EPT get rid of the pump human body, then loosen the mechanical seal screw and fold off the mechanical seal.
six. If the ball bearing or pump shaft is changed, the body mu EPT be folded down, loosen the 4 screws of the EPT bearing include, fold the nut and coupling of the rear stop of the pump shaft, and push the EPT finish of the pump. Fold the rear axle protect back.
seven. When reassembling soon after fixing and changing consumables.
one) Very first, the EPT and rear bearings and the oil seal are respectively mounted in the EPT and rear addresses, and the EPT go over with the bearing is mounted on the FS kind FRP centrifugal pump shaft, and the pump shaft with the EPT bearing protect is mounted on the body. .
2) The bearing sleeve is sleeved on the pump shaft, and the rear protect with the bearing is mounted on the pump shaft and the body.
3) Established the stress ring, install the coupling and tighten the nut.
4), the mechanism sealing ring is placed on the pump shaft.
5) Set up the static ring in the FS type FRP centrifugal pump and press the screw sleeve tightly.
six) Place the FS kind FRP centrifugal pump entire body with static ring on the frame, and debug the mechanical seal static and dynamic ring (normally 3-3.5mm) to just take the pump body very first.
7) Resolve the mechanical seal moving ring on the pump shaft, and then put in the pump human body on the body, and switch the mechanical seal static and dynamic ring to match the hand on the coupling.
eight) Put in the impeller on the pump shaft, and adju EPT the impeller and pump quit clearance (generally among 2-2.5mm) with the PTFE gasket to pad the anti-corrosion gasket, and then tighten the impeller and cap, then pad the pump. Shell gasket, install the pump protect and tighten the anti-corrosion nut.
nine) Install the put in pump bucket on the base plate and adju EPT the gap in between the coupling and the motor axis perpendicularly.
ten), FS kind FRP centrifugal pump spend consideration to the common servicing, frequently examine whether or not the pump is managing efficiently, with or without abnormal vibration, pay out interest to substitute the elastic block, replenish the lubricating oil of the bearing according to the oil normal, and routinely change the lubricating oil in the body.
| Q | m | r/min | KW | ||
| m3/h | L/s | ||||
| FS25×25-fifteen | two.8 4 five.two |
.seventy eight one.eleven one.44 |
sixteen fifteen 13.5 |
2900 | .seventy five |
| FS40×32-20 | 4.4 6.3 eight.three |
one.22 1.seventy five two.31 |
21 twenty eighteen |
2900 | 2.two |
| FS40×32-32 | four.four six.three 8.three |
one.22 one.seventy five 2.31 |
33 32 30 |
2900 | 3 |
| FS50×40-sixteen | four.36 seven.two nine.72 |
one.20 two.00 2.fifty |
sixteen 13 ten |
2900 | 2.2 |
| FS50×40-twenty | eight.8 12.5 sixteen.three |
2.44 3.forty seven 4.53 |
21.five twenty 17.eight |
2900 | 3 |
| FS50×32-35 | 8.8 12.five 16.3 |
two.44 three.47 four.fifty three |
35 32 thirty |
2900 | 4/5.five |
| FS65×50-20 | 17.5 twenty five 32.5 |
four.86 six.ninety four nine.03 |
21.5 twenty eighteen |
2900 | three/4 |
| FS65×50-twenty five | twenty five 35 forty five |
7 nine.7 12.5 |
26 twenty five 22 |
2900 | 4/5.five |
| FS65×50-32 | seventeen.five twenty five 32.five |
4.86 six.ninety four nine.03 |
34.4 32 27.5 |
2900 | five.5/7.five |
| FS80×65-35 | 30 forty five fifty five |
8.three 12.5 15.1 |
35 32 28 |
2900 | seven.5/eleven |
| FS80×65-35A | 25 35 forty five |
7 nine.seven twelve.five |
26 twenty five 22 |
2900 | 5.5/7.five |
| FS80×65-30 | thirty forty nine 60 |
eight.three 13.6 16.7 |
30 24 22 |
2900 | seven.5 |
| FS100×80-35 | 56 92.eight one hundred ten |
15.five twenty five.5 30.five |
35 29 25 |
2900 | fifteen/22 |
| FS100×80-50 | 70 100 130 |
19.4 27.eight 36.1 |
54 50 42 |
2900 | 22/30 |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique equipment manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the outlined alternative areas contained herein are not sponsored, approved, or made by the OEM.
