Product Description
50kw 75kw 100kw 200kw 350kw 15000rpm 20000rpm 24000rpm Permanent Magnet Motor for High Speed Compressor/Fan/Pump Oil Cooling
The Range of Heavy High Speed Motor:
Product Description
Product Feature
1.Suitable for the 10000rpm to 24000rpm Rated Speed
2.Reserve a large margin of security
3.High power & High torque
4.High efficiency
5.Small size
6.Low noise low vibration
7.The autonomous patented cooling structure
Specifications
Voltage: 380V AC-540V DC
Rated Power: 50kw-350kw
Rated Speed:6000rpm-24000rpm
Isolation: H
Cooling Method: Oil Cooling
Ingress Protection:IP65(IP54 option)
Duty type: S1
Pole:4
Installation: B3,B5,B35
Max Net Weight: 70-350kg
Application:
high speed compressor, fan, pump,blower
Main Products:
Customer Case
Company Profile
| About MC MOTOR |
MC Motor Technology Co., Ltd is a leading high-tech enterprises which focuses on the design, research and manufacture of the new generation high speed permanent magnet motors, which are widely used in industrial, agriculture, mining, building service, water-treatment, automotive and other new emerging industries.
In the past few years, MC Motor leads a series of technological innovations, and made remarkable achievements, includes:
1.Obtains CHINAMFG reserved intellectual property rights about approximately 1 hundred core technologies, most of which have been successfully applied to our motors
2.Achieved more than 50 new designed PM high speed motors from 8KW to 200KW, 5000rpm to 24000rpm, which have much higher efficiency, power density, reliability and smaller size & lighter weight than other similar PM motor.
3.Forms mature production lines and professional & excellent teams of management, R&D, marketing and sales, obtains very good reputation from our clients world-widely.
MC MOTOR has international standard QC management system to make sure every production process strictly complies with ISO9001-2015, IATF16949, ISO14001, ISO45001
Detailed Photos
Our Advantages
Certifications
Packaging & Shipping
More Motors
Other motors you will be interested in
| Motor type | Voltage | Rated power | Rated torque (N.m) | Rated speed | Efficiency | Insulation | Ingress protection | Pole Number | PIC | Weight | Cooling Method | Position Signal | Duty Type | Installation Method |
| (V AC) | (kW) | (rpm) | (%) | (kg) | ||||||||||
| SPRM( General) | 380 | 5.5-110 | 10-420 | 10000-80000 | 95.00% | H/F | IP54/IP67 | 8 | 19-112 | Water | Resolver | S1-S9 | B35 | |
| SPRM( General) | 380 | 4-37 | 35-463 | 15000-24000 | 95.00% | H/F | IP54/IP67 | 8 | 14-100 | Air | N/A | S1-S9 | B35 | |
| SPRM( General) | 380 | 37-350 | 35-463 | 12000-24000 | 95.00% | H/F | IP54/IP67 | 8 | 14-25 | Oil | N/A | S1-S9 | B35 | |
| SRPM112H4F7.5C | 380 | 7.5 | 3.4 | 21000 | 95 | H/F | IP54 | 4 | 12 | Air | N/A | S1-S9 | B35 | |
| SRPM112H4F7.5C | 380 | 7.5 | 3 | 24000 | 95 | H/F | IP54 | 4 | 12 | Air | N/A | S1-S9 | B35 | |
| SRPM112H4F15F | 380 | 15 | 6 | 24000 | 95 | H/F | IP54 | 4 | 20 | Air | N/A | S1-S9 | B35 | |
| SRPM112H4F18.5 | 380 | 18.5 | 8.41 | 21000 | 95 | H/F | IP54 | 4 | 25 | Air | N/A | S1-S9 | B35 | |
| SRPM180L8F18.5 | 380 | 18.5 | 33.3 | 5300 | 95 | H/F | IP54 | 8 | 25 | Air | N/A | S1-S9 | B35 | |
| SRPM130H4F22 | 380 | 22 | 10 | 21000 | 95 | H/F | IP54 | 4 | 33 | Air | N/A | S1-S9 | B35 | |
| SRPM130H4F37 | 380 | 37 | 19.63 | 18000 | 95 | H/F | IP54 | 4 | 47 | Air | N/A | S1-S9 | B35 | |
| SRPM168H2F75C | 380 | 75 | 21.07 | 34000 | 95 | H/F | IP54 | 2 | 50 | Air | N/A | S1-S9 | B35 | |
| SRPM112H4F15 | 380 | 15 | 5.96 | 24000 | 96.5 | H/F | IP54 | 4 | 12 | Air/Water | N/A | S1-S9 | B35 | |
| SRPM112H4W5.5 | 380 | 10 | 2.5 | 21000 | 94 | H/F | IP67 | 4 | 14 | Water | N/A | S1-S9 | B35 | |
| SRPM112H4W10 | 380 | 10 | 8 | 12000 | 94 | H/F | IP67 | 4 | 20 | Water | N/A | S1-S9 | B35 | |
| SRPM112H4W20 | 380 | 20 | 8 | 24000 | 96.5 | H/F | IP54 | 4 | 25 | Water | N/A | S1-S9 | B35 | |
| SRPM112H4W22B | 380 | 22 | 8.75 | 24000 | 96.5 | H/F | IP54 | 4 | 25 | Water | N/A | S1-S9 | B35 | |
| SRPM112H4W25 | 380 | 25 | 15.9 | 15000 | 96.5 | H/F | IP54 | 4 | 28 | Water | N/A | S1-S9 | B35 | |
| SRPM112H4W30 | 380 | 30 | 17.9 | 16000 | 96.5 | H/F | IP54 | 4 | 32 | Water | N/A | S1-S9 | B35 | |
| SRPM210M4W55B | 380 | 55 | 52.5 | 10000 | 95.4 | H/F | IP54 | 4 | 55 | Water | N/A | S1-S9 | B35 | |
| SRPM210H4W60 | 380 | 60 | 45.8 | 12500 | 96.5 | H/F | IP54 | 4 | 80 | Water | N/A | S1-S9 | B35 | |
| SRPM210M4W75C | 380 | 75 | 71.6 | 10000 | 96.5 | H/F | IP54 | 4 | 95 | Water | N/A | S1-S9 | B35,V1 | |
| SRPM130H4W20 | 380 | 20 | 3.3 | 60000 | 95.00% | H/F | IP54/IP67 | 4 | 45 | Water | N/A | S1-S9 | B35 | |
| SRPM95H2W18 | 380 | 18 | 0.667 | 75000 | 95.00% | H/F | IP54/IP67 | 2 | 45 | Water | N/A | S1-S9 | B35 | |
| SRPM95H2W5.5 | 380 | 5.5 | 2.29 | 80000 | 95.00% | H/F | IP54/IP67 | 2 | 25 | Water | N/A | S1-S9 | B35 | |
| SRPM180M8O30 | 380 | 30 | 23.8 | 12000 | 96.5 | H/F | IP67 | 8 | 12 | Water/Oil | N/A | S1-S9 | B35 | |
| SRPM165H4XO37 | 380 | 37 | 17.7 | 20000 | 96.50% | H/F | IP54/IP67 | 4 | 100 | Oil | N/A | S1-S9 | B35 | |
| SRPM214H4O50 | 380 | 50 | 19.9 | 24000 | 95.00% | H/F | IP54/IP67 | 4 | 100 | Oil | N/A | S1-S9 | B35 | |
| SRPM214H4O75 | 380 | 75 | 29.8 | 24000 | 95.00% | H/F | IP54/IP67 | 4 | 120 | Oil | N/A | S1-S9 | B35 | |
| SRPM214H4O100 | 380 | 100 | 39.8 | 24000 | 95.00% | H/F | IP54/IP67 | 4 | 150 | Oil | N/A | S1-S9 | B35 | |
| SRPM214H4O124 | 380 | 124 | 66 | 18000 | 95.00% | H/F | IP54/IP67 | 4 | 250 | Oil | N/A | S1-S9 | B35 | |
| SRPM160H4XO90 | 380 | 90 | 43 | 20000 | 96.5 | H/F | IP67 | 4 | 48 | Oil | N/A | S1-S9 | B35 | |
| SRPM205H4XO110 | 380 | 110 | 52.5 | 20000 | 96.5 | H/F | IP67 | 4 | 76 | Oil | N/A | S1-S9 | B35 | |
| SRPM205H4XO160 | 380 | 160 | 76.4 | 20000 | 96.5 | H/F | IP67 | 4 | 86 | Oil | N/A | S1-S9 | B35 | |
| SRPM205H4XO200 | 380 | 200 | 95.5 | 15500 | 95.5 | H/F | IP67 | 4 | 350 | Oil | N/A | S1-S9 | B35 | |
| SRPM205H4O220 | 380 | 200 | 131.1 | 16000 | 95.5 | H/F | IP67 | 4 | 310 | Oil | N/A | S1-S9 | B35 | |
| SRPM290H4O350 | 380 | 350 | 167.1 | 20000 | 95.5 | H/F | IP67 | 4 | 530 | Oil | N/A | S1-S9 | B35 |
| Motor type | Voltage (V AC) |
Rated power (kW) |
Rated torque (N.m) | Rated speed (rpm) |
Efficiency (%) |
Duty type | Insulation | Ingress protection | Pole Number | Weight (kg) |
Cooling Method | position signal |
| SRPM160H4XO15 | 380 | 15 | 5.96 | 24000 | 96.5 | S1 | H/F | IP67 | 4 | 12 | Oil | Resolver |
| SRPM160H4XO75 | 380 | 75 | 35.8 | 20000 | 96.5 | S1 | H/F | IP67 | 4 | 44 | Oil | Resolver |
| SRPM160H4XO90 | 380 | 90 | 43 | 20000 | 96.5 | S1 | H/F | IP67 | 4 | 48 | Oil | Resolver |
| SRPM205H4XO110 | 380 | 110 | 52.5 | 20000 | 96.5 | S1 | H/F | IP67 | 4 | 76 | Oil | Resolver |
| SRPM205H4XO160 | 380 | 160 | 76.4 | 20000 | 96.5 | S1 | H/F | IP67 | 4 | 86 | Oil | Resolver |
| SRPM205H4XO200 | 380 | 200 | 95.5 | 20000 | 96.5 | S1 | H/F | IP67 | 4 | 95 | Oil | Resolver |
FAQ
1. Can performanent magnet synchronous motor be used as generator?
Yes. Permanent magnet synchronous motor can work as a generator because of its special working theory. If it runs CW as a motor, then runs CCW as a generator. But please kindly note, if when you want to work it as a generator, you need to change a suitable motor controller with AFE function
2. Why can not directly use 3 phase ac supply voltage to start permanent magnet synchronous motor?
Becuase rotor is with big innertia, and magetic files spins so fast that static rotor has no way to spin with magetic filed.
3. Any special technical request on this motor’s VFD driver? And Do you have such driver?
Permanent magnet synchronous motor’s driver should be vector control VFD with special inner software, such as CHINAMFG 6SE70 series, Yakawa CR5 series, ABB ACS800 series, CHINAMFG A740 series, B&R P84 and P74 series, etc.. Yes, our MH300 series VFD matches with this motor.
4. Is there any protective measures to defend permanent magnet rotor from failure?
Yes, each permanent magnet rotor passes corrossion resistance, consistency, high temperature demagnetization test, linear demagnetization test, etc. Its demagnetization index is within 2%. But if working environment is serious oxiditive corrosion, kindly advise for higher protection level.
5. Where is this permanent magnet synchronous motor normally used to?
This permanent magnet synchronous motor is normally used to variable frequency speed situation.
MC Motor Technology Co., Ltd. presents the Permanent Magnet Synchronous Motor, a versatile and efficient solution for various applications.
Features:
- Can be used as a generator
- Requires a suitable motor controller with AFE function for generator operation
- Cannot directly use three-phase AC supply voltage for motor startup due to rotor inertia
- Requires a vector control VFD with special inner software for optimal performance
- Compatible with CHINAMFG 6SE70 series, Yakawa CR5 series, ABB ACS800 series, CHINAMFG A740 series, B&R P84 and P74 series VFDs
- MC Motor Technology’s MH300 series VFD is recommended for use with this motor
- Provides protective measures against rotor failure, including corrosion resistance and high-temperature demagnetization tests
- Demagnetization index within 2%
- Can be used in variable frequency speed situations
Benefits:
- Efficiently converts mechanical energy into electrical energy when used as a generator
- Ensures smooth motor startup by using a suitable motor controller
- Optimal motor performance achieved with vector control VFDs
- Wide compatibility with leading VFD brands
- Reliable and durable rotor design with protective measures
- Minimal risk of demagnetization even in challenging environments
- Flexible usage in variable frequency speed applications
Choose the Permanent Magnet Synchronous Motor from MC Motor Technology Co., Ltd. for reliable and efficient motor solutions.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industrial, Power Tools, Fan, Blower, Mining, Compressor, Pump |
|---|---|
| Operating Speed: | High Speed |
| Function: | Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
| Structure and Working Principle: | Brushless |
| Samples: |
US$ 8000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
editor by CX 2024-04-16
China Custom High Torque 380V AC Planetary Gear Motor brushless motor
Product Description
Product Description
HPS is a leading manufacturer and supplier of planetary gearbox and gear motor in China, Our company covers an area of 6 pcs. Meanwhile, all 6 production lines strictly comply with ISO 9001 and CE to control the quality. wide-range series products have been exported to 30+ countries all over the world.
Besides, we are making great efforts to customize and provide complete solutions to meet different clients’ requirements and market. Our R&D team has 15 years experience in this field, makes our company honored with many invention patents and utility patents, which makes CZPT the most trustable and reliable manufacturer.
| No | Model | AC380.24.500 |
| 1 | Stages | 4 |
| 2 | Ratio | 1093.5:1 |
| 3 | Rated Output Torque | 500 Nm |
| 4 | Max Output Torque | 700 Nm |
| 5 | Rated Output Speed | 2.4 rpm |
| 6 | Rated Current | 1.7A |
| 7 | Rated Voltage | AC 380V |
| 8 | Noise | ≤60dB |
| 9 | Temperature | -40-80ºC |
Successful Projects
Exhibition
HPS attends 5-6 exhibitions every year, both solar PV exhibitions and automation industry exhibitions, professional sales team and quality products build CZPT a good reputation in the market.
Production & Test Equipments
Certifications
Packaging & Shipping
FAQ
Q1:Which areas are your products mainly used in?
A:At present, we have 2 main products: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are used in automation fields, such as medical equipment, 3D printers, door openers, tapping machines, CNC lathes and a series of automation equipment. In addition, our solar geared motors are used in photovoltaic power generation projects, which are mainly combined with rotary drives to drive solar panels to track sunlight.
Q2: How to choose the suitable planetary gearbox?
A :First of all, we need you to be CZPT to provide relevant parameters. If you have a motor drawing, it will let us recommend a suitable gearbox for you faster. If not, we hope you can provide the following motor parameters: output speed, output torque, voltage, current, IP, noise, operating conditions, motor size and power, etc.
Q3: What is the price ?
A : The main determining factor for the price of each product is the order volume. You can communicate with us and let us understand each other. I believe that our prices, product quality and our services can definitely make you satisfied.
Q4: Do you provide customized service?
A: Yes, we provide customized services. You only need to put forward your needs, and we will do our best to provide you with a plan, make plans, and try our best to meet your needs.
| Application: | Industrial |
|---|---|
| Speed: | Low Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving, Control |
| Casing Protection: | Closed Type |
| Number of Poles: | 2 |
| Samples: |
US$ 160/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
editor by CX 2023-05-25
China 42mm 12V/24V/36V/48V Brushless DC Planetary Gear Motor with Drive ac motor
Product Description
Technical specs
1.low noise and higher quality
two.numerous measurement for you decide on from
three.prolonged lifestyle operating time
Our business FAQ for you
(1)Q: What kind motors you can give?A:For now,we primarily give Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so on.
(2) Q: Is it feasible to check out your manufacturing facility
A: Certain. But you should kindly maintain us posted a handful of times in advance. We need to have to verify our
schedule to see if we are available then.
(3) Q: Can I get some samples
A: It is dependent. If only a few samples for personal use or substitution, I am afraid it will
be hard for us to offer, because all of our motors are customized created and no stock
accessible if there is no even more demands. If just sample screening ahead of the formal get and
our MOQ, price tag and other terms are satisfactory, we might love to offer samples.
(4) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is between one thousand~10,000pcs for different models after sample approval.
But it’s also okay for us to settle for scaled-down heaps like a couple of dozens, hundreds or hundreds
For the preliminary 3 orders after sample approval.For samples, there is no MOQ prerequisite. But the significantly less the much better (like no more than 5pcs) on situation that the amount is ample in circumstance any adjustments required right after preliminary tests.
|
/ Piece | |
100 Pieces (Min. Order) |
###
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Control, Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
|
/ Piece | |
100 Pieces (Min. Order) |
###
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Excited |
| Function: | Control, Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
The Benefits of Using a Gear Motor
A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.
Electric motor
The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Gear reducer
A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor shaft
Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
First stage gears
The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.
editor by CX 2023-04-03
China 36V 15W 43mm Planetary Brushless DC Motor with High Quality ac motor
Item Description
30w 36mm DC brushless Motor
Introduction
Brushless DC motor (BLDC) is made up of motor and driver, which is a kind of typical merchandise of mechanical and electrical and electrical integration. It is high regarded bymarket as its small volume, low noise, high efficiency, wide range of speed control and steady working state with less inaccuracy.
Specification
| Model of Motor | Voltage V |
Rated Power W |
Rated Current A |
Rated Speed RPM |
Rated Torque N.m |
Lenth |
| GSBLD43R30D12 | 12 | 30 | 3.eighty five | 3000 | .096 | 80mm |
|
GSBLD43R30D24 |
24 | 30 | 1.92 | 3000 | .096 | 80mm |
| GSBLD43R20D12 |
12 | 20 | 2.56 | 3000 | .064 | 70mm |
| GSBLD43R20D24 | 24 | 20 | 1.28 | 3000 | .064 | 70mm |
Notice:
Motor voltage, electrical power and velocity will be personalized in accordance to your request under the allowed circumstance of adoptable dimension.
Company Overview
Greensky Energy Organization Limited is a China dependent international firm who is specialized in electric motor, gearbox and controlling program establishing, producing, quality controlling and trading.
Mission:
We are dedicated to create an worldwide electric powered motor organization who can produce 1-cease dependable merchandise with consumer-oriented provider.
Historical past:
Greensky was set up in 2571 by CZPT Cheng in Los Angeles, United states of america and moved to HangZhou, China in 2011. In the past 8 many years, the crew of Greensky carries on to develop the benefit to our esteemed buyers all more than the planet by building up wide and trustworthy supply chain management technique, effective good quality & shipping time control system, value performance manufacturing system and fast-respond professional provider.
Place:
Xihu (West Lake) Dis. district, HangZhou, China
Xihu (West Lake) Dis. is a higher-tech zone which is the centre of oversea Chinese expertise business owners. Some popular neighbours contain Alibaba, Netease and Geely corporation.
History:
Greensky is a subsidiary of EagleEye Funds Minimal who has 3 manufacturing plants and 1 sales workplace with far more than five hundred workers and all round 200 million sales.
Greensky Overseas Exhibitions:
Greensky Certificates:
FAQ
one Q: What’s your MOQ?
A: 1unit is alright for various varieties.
2 Q: What about your warranty?
A: A single 12 months.
three Q: Do you supply OEM service with customer-brand?
A: Indeed, we could do OEM orders, but we mainly target on our very own brand name.
four Q: How about your payment terms ?
A: TT, western union and paypal. 100% payment in advanced for orders less $5,000. thirty% deposit and stability just before supply for orders above $5,000.
5 Q: How about your packing ?
A: Carton, Plywood situation. If you need to have far more, we can pack all merchandise with pallet
6 Q: What details should be provided, if I purchase from you ?
A: Rated energy, gearbox ratio, enter pace, mounting place. More information, far better!
seven Q: How do you deliver the buy?
A: We will evaluate and choose the most appropriate ways of shipping and delivery by sea, air or categorical courier.
Warmly welcome your inquiries !
| Application: | Universal, Industrial, Household Appliances, Power Tools, Medical Equipment |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Excited |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Model of Motor | Voltage V |
Rated Power W |
Rated Current A |
Rated Speed RPM |
Rated Torque N.m |
Lenth |
| GSBLD43R30D12 | 12 | 30 | 3.85 | 3000 | 0.096 | 80mm |
|
GSBLD43R30D24 |
24 | 30 | 1.92 | 3000 | 0.096 | 80mm |
| GSBLD43R20D12 |
12 | 20 | 2.56 | 3000 | 0.064 | 70mm |
| GSBLD43R20D24 | 24 | 20 | 1.28 | 3000 | 0.064 | 70mm |
| Application: | Universal, Industrial, Household Appliances, Power Tools, Medical Equipment |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Excited |
| Function: | Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Model of Motor | Voltage V |
Rated Power W |
Rated Current A |
Rated Speed RPM |
Rated Torque N.m |
Lenth |
| GSBLD43R30D12 | 12 | 30 | 3.85 | 3000 | 0.096 | 80mm |
|
GSBLD43R30D24 |
24 | 30 | 1.92 | 3000 | 0.096 | 80mm |
| GSBLD43R20D12 |
12 | 20 | 2.56 | 3000 | 0.064 | 70mm |
| GSBLD43R20D24 | 24 | 20 | 1.28 | 3000 | 0.064 | 70mm |
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
editor by CX 2023-03-30
China 1200w 24V brushless DC motor drive transaxle for mobility scooter ac motor
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
How to Select a Gear Motor
A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.
Angular geared motors
Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Planetary gearboxes
Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Hydraulic gear motors
Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Croise motors
There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.
editor by czh2023-02-15
China DC Brushless AC Motorized Pulley Conveyor Small Roller Drum Planetary Gear Motor for Material Handling Industry Airport Check-in Conveyor 50mm 60mm 113mm 138mm motor driver
Product Description
What is applications use gear motor?
Electric gear motors are used in various applications that require for high output torque and low output rotation speed.
What is gear motor?
Gear motor is combined electric motor with gear reducer box.
Would you like to be GPG motor wholesaler,dealer,distributor,stockist?
GPG motor can improve your business.
Motorized drive roller motor is a new type of drive device,which is a conveyor drive where the motor,gear reducer and all moving parts are enclosed inside the drum.It is mainly used in fixed and movable type belt conveyor.
This roller drum motor can run under severe enviroment,such as water flow and spray,and erosion enviroment.Its protection grade is IP66.
If there are special requirement for the transmission system,such as space,low noise and high power,you can use our drum motor TMX.
The roller drum motor is widely used in the food processing,phamaceutical industry,packing machinery,aiport baggage handling system,meat processing industry,postal sorting and belt conveyor,etc.
Main benefits of belt conveyor drive roller drum motor
1.High mechanical efficiency highly reduces energy costs
2.Compact unit design enhances space utilization
3.No external moving parts increases operator safety
4.No maintenance reduces operating costs
We do also have DC brushless planetary geared roller drum motor to meet different application.
Should you any questions,please feel free to contact Ms Susan Liu directly.
Please leave message or send inquiry.I will be back to you asap.
| Rated power | 100W~5500W |
| Rated voltage | Single phase 110V, 220V,Three phase 220V,380V,440V |
| Pole Number | 2P,4P,6P,8P |
| Drum length | L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm |
| Drum diameter | 80mm,113mm,138mm,165mm,216mm320mm,etc |
| Drum material | carbon steel,stainless steel |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
###
| Samples: |
US$ 299/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Rated power | 100W~5500W |
| Rated voltage | Single phase 110V, 220V,Three phase 220V,380V,440V |
| Pole Number | 2P,4P,6P,8P |
| Drum length | L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm |
| Drum diameter | 80mm,113mm,138mm,165mm,216mm320mm,etc |
| Drum material | carbon steel,stainless steel |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Application: | Industrial |
|---|---|
| Speed: | Constant Speed |
| Number of Stator: | Three-Phase |
| Function: | Driving, Control |
| Casing Protection: | Protection Type |
| Number of Poles: | 4 |
###
| Samples: |
US$ 299/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Rated power | 100W~5500W |
| Rated voltage | Single phase 110V, 220V,Three phase 220V,380V,440V |
| Pole Number | 2P,4P,6P,8P |
| Drum length | L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm |
| Drum diameter | 80mm,113mm,138mm,165mm,216mm320mm,etc |
| Drum material | carbon steel,stainless steel |
The Basics of a Planetary Motor
A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.
Self-centering planetary gears
This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
High torque
Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
High efficiency
A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
High cost
In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.
editor by czh 2022-11-24
China 750W 86mm Brushless Dc Motor NEMA34 BLDC Motor 48V 310V AC motor 220 volt Totally Enclosed brushless motor
Warranty: 3months-1year
Model Number: 86BLS130
Usage: BOAT, Car, Electric Bicycle, FAN, Home Appliance, Cosmetic instrument, SMART HOME
Type: Brushless Motor
Torque: 2.5Nm
Construction: Permanent Magnet
Commutation: Brushless
Protect Feature: Totally Enclosed
Speed(RPM): 3000RPM
Continuous Current(A): 19.5A
Efficiency: Ie 3
Matched driver: BL75/BL75H
Packaging Details: Carton
Port: HangZhou, HangZhou, HangZhou
If you need 3D model of the motor, please give us your email address and we will email you it.
General Specification:
| Winding type | Star |
| Hall effect angle | 120° |
| Insulation class | B |
| Ambient temperature range | -20°C~ +50°C |
| Insulation resistance | 100MΩMin 500VDC |
| Dielectric Strength | 500VAC 1 minute |
| Number of poles/phase | 4/3 |
Specification:
| Model | Voltage (VDC) | Rated Parameters | Peak Torque (N.m) | Torque Constant (N.m/A) | Back EMF (V/k RPM) | Rotor Inertia (kg.mm2) | Length (L:mm) | Weight (kg) | |||
| Speed (rpm) | Torque (N.m) | Current (A) | Power (W) | ||||||||
| J86BLS80-430A | 48 | 3000 | 1.0 | 8.5 | 314 | 3.0 | 0.133 | 9.8 | 120 | 80 | 2.3 |
| J86BLS105-430A | 3000 | 1.8 | 14.8 | 565 | 5.4 | 0.133 | 9.8 | 200 | 105 | 3.4 | |
| J86BLS115-430A | 3000 | 2.1 | 18 | 659 | 6.3 | 0.133 | 9.7 | 260 | 115 | 3.8 | |
| J86BLS130-430A | 3000 | 2.5 | 19.5 | 785 | 7.5 | 0.138 | 10.2 | 320 | 130 | 4.3 | |
| J86BLS80-630A | 310 | 3000 | 1.0 | 1.4 | 314 | 3.0 | 0.79 | 60 | 120 | 80 | 2.3 |
| J86BLS105-630A | 3000 | 1.8 | 2.5 | 565 | 5.4 | 0.79 | 60 | 200 | 105 | 3.4 | |
| J86BLS115-630A | 3000 | 2.1 | 3.0 | 659 | 6.3 | 0.79 | 58.9 | 260 | 115 | 3.8 | |
| J86BLS130-630A | 3000 | 2.5 | 3.3 | 785 | 7.5 | 0.8 | 62 | 320 | 130 | 4.3 | |
Dimension Unit:mm
Wiring Diagram
How to Select a Gear Motor
A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.
Angular geared motors
Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Planetary gearboxes
Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Hydraulic gear motors
Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Croise motors
There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.
editor by czh