Tag Archives: china motors

China high quality High Efficiency Induction Motors Magnetic Permanent Electric Motor Permanent Magnet Synchronous Motor supplier

Product Description

Product Description

TYCP series three-phase permanent magnet synchronous motor mounting size is completely consistent with Y and Y2 series
motors. Customers can directly purchase TYCP series synchronous motors to replace Y and Y2 series asynchronous motors.

Permanent magnet motors have the following advantages:

1. High power factor.

2. High starting torque.

3. Good performance indicators.

4. The efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

5. When the Y series motor operates at 60% load, the efficiency decreases by 15%, the power factor decreases by 30%, and the force and energy index decreases by 40%; However, the efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.

6. Low temperature rise: There is no resistance loss in the rotor winding and almost no reactive current in the stator winding, resulting in low motor temperature rise.

7. Small size, light weight, and low consumables: The volume, weight, and materials used for permanent magnet synchronous motors of the same capacity can be reduced by about 30%.

8. Capable of atmospheric gap formation, facilitating the formation of new magnetic circuits.

9. The armature has a small reaction and strong overload resistance.

Product Parameters

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90S-2.2-30 2.2 3000 150 7 4 88 380 22
TYCP90l-3-30 3 3000 150 9.6 5.4 89.1 380 25
TYCP90l-4-30 4 3000 200 12.7 7.3 90 380 32
TYCP100l-5.5-30 5.5 3000 200 17.5 10 90.9 380 39
TYCP100l-7.5-30 7.5 3000 200 23.9 13.6 91.7 380 46
TYCP132S-11-30 11 3000 200 35 20 92.6 380 55
TYCP132S-15-30 15 3000 200 47.8 27.2 93.3 380 61
TYCP132m-18.5-30 18.5 3000 200 58.9 33.6 93.7 380 88
TYCP160m-22-30 22 3000 200 70 39.9 94 380 108
TYCP160m-30-30 30 3000 200 95.5 54.5 94.5 380 158
TYCP180m-37-30 37 3000 200 117.8 67.2 94.8 380 168
TYCP180m-45-30 45 3000 200 143.3 81.7 95 380 180
TYCP225S-55-30 55 3000 200 175.1 99.8 95.3 380 298
TYCP225S-75-30 75 3000 200 238.8 136.1 95.6 380 320
TYCP225m-90-30 90 3000 200 286.5 163.4 95.8 380 377
TYCP250m-110-30 110 3000 200 350.2 199.7 96 380 401
TYCP250m-132-30 132 3000 200 420.2 239.6 96.2 380 480
TYCP280s-160-30 160 3000 200 509.3 290.4 96.3 380 515
TYCP280m-200-30 200 3000 200 636.7 363 96.5 380 570

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 1500R/min
TYCP90S-1.5-15 1.5 1500 75 9.6 2.7 88.2 380 21
TYCP90l-2.2-15 2.2 1500 75 14 4 89.5 380 25
TYCP100l-3-15 3 1500 75 19.1 5.4 90.4 380 29
TYCP100l-4-15 4 1500 100 25.5 7.3 91.1 380 36
TYCP112m-5.5-15 5.5 1500 100 35 10 91.9 380 42
TYCP132m-7.5-15 7.5 1500 100 47.8 13.6 92.6 380 58
TYCP132m-11-15 11 1500 100 70 20 93.3 380 63
TYCP160l-15-15 15 1500 100 95.5 26.8 93.9 380 114
TYCP160l-18.5-15 18.5 1500 100 117.8 33 94.2 380 122
TYCP180m-22-15 22 1500 100 140.1 39.3 94.5 380 165
TYCP180l-30-15 30 1500 100 191 53.6 94.9 380 190
TYCP225S-37-15 37 1500 100 235.6 66.1 95.2 380 290
TYCP225l-45-15 45 1500 100 286.6 80.4 95.4 380 325
TYCP225l-55-15 55 1500 100 350.2 98.3 95.7 380 367
TYCP250m-75-15 75 1500 100 477.5 134 96 380 440
TYCP250m-90-15 90 1500 100 573 160.8 96.1 380 525
TYCP250m-110-15 110 1500 100 700.3 196.5 96.3 380 550
TYCP280m-132-15 132 1500 100 840.4 235.8 96.4 380 608
TYCP280m-160-15 160 1500 100 1018.7 285.8 96.6 380 670

 

Model Output power
(KW)
Speed
(R/min)
Frequency
(HZ)
Rated torque
(N.m)
Rated current
(A)
Eff
(%)
Rate voltage
(V)
Weight
(KGS)
                                                                    TYCP series standard speed 3000R/min
TYCP90l-1.1-10 1.1 1000 50 10.5 2 84.5 380 25
TYCP90l-1.5-10 1.5 1000 50 14.3 2.7 85.9 380 27
TYCP100l-2.2-10 2.2 1000 50 21 4 87.4 380 29
TYCP112m-3-10 3 1000 66.7 28.7 5.4 88.6 380 41
TYCP132m-4-10 4 1000 66.7 38.2 7.3 89.5 380 43
TYCP132m-5.5-10 5.5 1000 66.7 52.5 10 90.5 380 45
TYCP160l-7.5-10 7.5 1000 66.7 71.6 13.6 91.3 380 99
TYCP160l-11-10 11 1000 66.7 105.1 20 92.3 380 108
TYCP180m-15-10 15 1000 66.7 143.3 27.2 92.9 380 180
TYCP180m-18.5-10 18.5 1000 66.7 176.7 33.6 93.4 380 187
TYCP225s-22-10 22 1000 66.7 210.1 39.9 93.7 380 298
TYCP225m-30-10 30 1000 66.7 286.5 54.5 94.2 380 305
TYCP225m-37-10 37 1000 66.7 353.4 67.2 94.5 380 315
TYCP250m-45-10 45 1000 66.7 429.8 81.7 94.8 380 379
TYCP250m-55-10 55 1000 66.7 525.3 99.8 95.1 380 387
TYCP280s-75-10 75 1000 66.7 716.3 136.1 95.4 380 520

Detailed Photos

Our Advantages

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:

1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Household Appliances, Industrial, Power Tools
Operating Speed: Adjust Speed
Operation Mode: Electric Motor
Magnetic Structure: Permanent Magnet
Function: Driving, Control
Structure: Rotating Pole Type (Armature Fixed)
Samples:
US$ 826/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China high quality High Efficiency Induction Motors Magnetic Permanent Electric Motor Permanent Magnet Synchronous Motor   supplier China high quality High Efficiency Induction Motors Magnetic Permanent Electric Motor Permanent Magnet Synchronous Motor   supplier
editor by CX 2024-05-09

China Standard Tvf Series Permanent Magnet Synchronous Motors vacuum pump diy

Product Description

Product Description

The TVF series air-cooled permanent magnet synchronous motor is a product completely independently developed by our company. It adopts the national standard Y series cast iron frame. The installation dimensions are consistent with the national standard asynchronous motor and can seamlessly replace the original asynchronous motor. Compared with asynchronous motors, this series of permanent magnet servo motors have the characteristics of small rated current, strong overload capacity, high power factor, wide efficient operating range, and good power saving effect. It is especially suitable for changes in motor exposure and periodic changes in load. Adjustment occasions, such as air compressors, plastic extruders, metal extruders, stone cutting machines, cement grinders, stone crushers, ship power, etc.
Power range of this series of motors: 18.5-1250kw
Frame number: H160-450

 

Application Condition

1. General that do not contain flammable, volatile or corrosive gases place and machinery without independent requirements
2. Ring temperature: varies with seasons, but not more than 40t
3. Hai Yu: no more than 000m
4. Installation structure: IMB35, IMB5
5. Protection level: IP54
6. Surface paint: black

 

Technical Data

 

Note:This series of products is recommended to be cooled with oil. You can also use automobile antifreeze for cooling, but you cannot directly use untreated tap water for cooling.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Variable Speed
Number of Stator: Three-Phase
Function: Driving
Casing Protection: Protection Type
Number of Poles: 6
Customization:
Available

|

China Standard Tvf Series Permanent Magnet Synchronous Motors   vacuum pump diyChina Standard Tvf Series Permanent Magnet Synchronous Motors   vacuum pump diy
editor by CX 2024-05-09

China supplier PM-Permanent Magnet Modern Design Gearbox Gear Brush Step Motors Synchronous Ac Reversible Motor vacuum pump ac

Product Description

Model Selection

ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
 

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Detailed Photos

Product Parameters

Power: 6W, 10W, 15W, 25W, 40W, 60W, 90W, 100, 120W
Dimension: 60, 70, 80, 90mm
Voltage: 110V, 220V
Frequency: 50Hz, 60Hz
Accessory: Terminal box, theremal protector, pedestal of the motor, fan

Model Type Output power Voltage Frequency Current Starting Rated Rated
Upper:Pinion Shaft
Below:Round Shaft
Lead Wire Type Dimensiors (1) Terminal Box Type Dimensions(2) W V Hz A mN.m mN.m r/min
5IK90GU-AF 5IK90GU-AFT 90 1ph 100 50 1.55 450 700 1250
(5IK90A-AF) (5IK90A-AFT) 60 1.85 570 1550
5IK90GU-EF 5IK90GU-EFT 90 1ph 110 60 1.4 500 570 1550
(5IK90A-EF ) (5IK90A-EFT) 1ph 120 1.45
5IK90GU-CF 5IK90GU-CFT 90 1ph 220 50 0.72 450 700 1250
(5IK90A-CF) (5IK90A-CFT) 1ph 230 0.7
5IK90GU-HF 5IK90GU-HFT 90 1ph 220 60 0.71 450 570 1550
(5IK90A-HF ) (5IK90A-HFT) 1ph 230 0.75
5IK90GU-SF 5IK90GU-SFT 90 3ph 220 50 0.6 1350 700 1250
(5IK90A-SF) (5IK90A-SFT) 60 0.55 1100 570 1550

Parallel Shaft Gearhead:

Gearhead Type Gearhead Model Gear Ratio
Long Life • Low Noise 5GN(   )K 3,3.6,5,6,7.5,9, 12.5, 15,18,25,30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200
5GN10XK ( Decimal Gearhead )

Other Related Products

Click here to find what you are looking for:

Company Profile

 

FAQ

Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Speed: Constant Speed
Number of Stator: Two-Phase
Excitation Mode: PM-Permanent Magnet
Function: Driving
Number of Poles: 2
Operate Mode: The Three Single Phase
Customization:
Available

|

China supplier PM-Permanent Magnet Modern Design Gearbox Gear Brush Step Motors Synchronous Ac Reversible Motor   vacuum pump acChina supplier PM-Permanent Magnet Modern Design Gearbox Gear Brush Step Motors Synchronous Ac Reversible Motor   vacuum pump ac
editor by CX 2024-04-25

China Standard 4kw 5…5HP Electric Motors 4kw Permanent Magnet Synchronous Motor AC Motor with high quality

Product Description

Product Description

Three-Phase Motor is an electric motor driven by a three-phase AC power source.
They are widely used as power sources for industrial equipment and machinery. Also called three-phase induction motors (induction motors), they are generally powered by a three-phase AC power supply of 200 V, 110V, 380V and so on.
Three-Phase Motors consist of a stator, rotor, output shaft, flange bracket, and ball bearings.

YS (MS), YE3, Y4 Motor Series

YS (MS), YE3, YE4 series three-phase asynchronous motors with Aluminum housing adopted the newest design and high quality material.lt is conformity with the IEC 34-1 standards. The efficiency of the motors can meet EFF2 and EFF1 if requested. That good features: perfect performance low noises light vibration, reliable running, good appearance, small volume and light weight.

YEJ Brake Motor Series

Brake motor is made of 2 parts: three-phase asynchronous motors and brake, it belongs to three-phase-asynchronous motor derived series. Manual brake release and bolt release are 2 forms of brake. Brake is the main components of the brake motor. Its working power divided into 2 categories: One is AC braking, the other is DC braking.  Our company produces brake motors are DC brake motors, the advantage of the braking torque is below, easy installation, braking response speed, high reliability, versatility and other advantages.

To the Ac power to the brake coil is provided with suction cups for low voltage winding rated DC voltage. A single-phase AC power is rectified then supply to a sucker winding to make it work so the brake motor terminal box fitted with a rectifier, wiring diagram below.Brake motor braking time (t) is the time from the motor and brake stopping the power to the shaft completely stopped, under normal circumstances, for 63 to 880 frame size motor, the braking time is 0.5 seconds. For o-132 frame size motor the braking time is 1 second, For 160 to180 frame size motor, the braking time is 2 seconds.

YVP Frequency Conversion Motor Series

YVP speed has become the popular way, can be widely used in various industries continuously variable transmission.
In the variable frequency motor speed control system, using power electronic inverter as a power supply is inevitable that there will be high harmonics, harmonic greater impact on the motor. Mainly reflected in the magnetic circuit and the circuit harmonic magnetic potential harmonic currents. Different amplitudes and frequencies of harmonic currents and magnetic flux will cause the motor stator copper loss rotor aluminum consumption. These losses of the motor efficiency and power factor reduction, the majority of these losses into heat, causing additional heating of the motor, causing the motor temperature increases, the increase in temperature generally 10~20%. As a result of electromagnetic interference power, conduction and radiation, the stator winding insulation aging, resulting in deterioration of the common-mode voltage and leakage current of accelerated beaning, bearing perishable, while the motor screaming. Since harmonic electromagnetic torque constant harmonic electromagnetic torque and vibration harmonic MMFs and rear rotor harmonic current synthesis. The torque of the motor torque will generate pulsating issued, so that the motor speed vibration is low.
Our produce YS, IE2, IE3, IE4 Series Universal three-phase asynchronous motor design, our main consideration is the motor overload, starting performance, efficiency and power factor. Another major consideration for non-sinusoidal motor power adaptability. Suppose the influence of higher harmonic current to the motor. Since the motor is increased when the working
Temperature of the low-frequency region, class F insulation dl ass above, the use of polymer insulation materials and vacuum pressure impregnation process, and the use of special insulation structure. Ln order to reduce the electromagnetic torque ripple, improve the precision mechanical parts to improve the quality level constant. high-precision bearing mute. n order to eliminate vibration motor, the motor structure to strengthen the overall design.

Operating conditions:

Ambient temperature: -15ºC<0<40ºC Duty:  S1 (continuous)
Altitude: not exceed1000m Insulation class:  B/F/H
Rated voltage: 380V, 220V-760Vis available Protection class: lP54/IP55
Rated frequency: 50HZ/60HZ Cooling method:  IC0141

Production Flow

Product Overall & Installation Dimensions:

YS/MS Series:

 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 135 215 285
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 137 226 335
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 206 206 150 250 376
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 222 228 170 285 400
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 460
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 257 267 190 325 500
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 615
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 255 420 675
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 700
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 355 380 280 455 740

YE3, YE4 Series:
 

Frame size lnstallation Dimensions B3 (mm ) lnstallation Dimensions B5 (mm ) lnstallation Dimension B14 (mm ) Mounting Dimensions  (mm )
A B C D E F G H K M N P S T M N P S T AB AC AD HD L
56 90 71 36 9 20 3 7.2 56 5.8 100 80 120 7 3 65 50 80 M5 2.5 110 120 100 155 195
63 100 80 40 11 23 4 8.5 63 7 115 95 140 10 3 75 60 90 M5 2.5 125 130 100 165 215
71 112 90 45 14 30 5 11 71 7 130 110 160 10 3.5 85 70 105 M6 2.5 140 150 110 185 246
80 125 100 50 19 40 6 15.5 80 10 165 130 200 12 3.5 100 80 120 M6 3 160 170 145 215 305
90S 140 100 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 360
90L 140 125 56 24 50 8 20 90 10 165 130 200 12 3.5 115 95 140 M8 3 178 185 165 226 385
100L 160 140 63 28 60 8 24 100 12 215 180 250 15 4 130 110 160 M8 3.5 270 206 175 250 445
112M 190 140 70 28 60 8 24 112 12 215 180 250 15 4 130 110 160 M8 3.5 270 228 190 285 455
132S 216 140 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 475
132M 216 178 89 38 80 10 33 132 12 265 230 300 15 4 165 130 200 M10 4 270 267 220 325 570
160M 254 210 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 655
160L 254 254 108 42 110 12 37 160 15 300 250 350 15 5 215 180 250 M12 4 320 330 260 420 685
180M 279 241 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 705
180L 279 279 121 48 110 14 42.5 180 15 300 250 350 19 5 265 230 300 M15 4 360 380 305 455 745

YEJ B3 Series H63-180:
 

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 Φ7 135 120×120 167 255
71 112 90 45 Φ14 30 5 16 71 Φ7 137 130×130 178 305
80M 125 100 50 Φ19 40 6 21.5 80 Φ10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
90L 140 125 56 Φ24 50 8 27 90 Φ10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 Φ12 200 185×185 240 440
112M 190 140 70 Φ28 60 8 31 112 Φ12 230 200×200 270 480
132S 216 140 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
132M 216 178 89 Φ38 80 10 41 132 Φ12 270 245×245 315 567
160M 254 210 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
160L 254 254 108 Φ42 110 12 45 160 Φ14.5 320 335×335 450 780
180M 279 241 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 Φ14.5 355 370×370 500 880

YEJ B5 Series H63-180:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 255
71 Φ14 30 5 16 130 110 160 10 3 130×130 107 305
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 440
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 480
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 567
160M Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
160L Φ42 110 12 45 300 250 350 18.5 5 320×320 290 780
180M Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880
180L Φ48 110 14 51.5 300 250 350 18.5 5 360×360 340 880

YEJ B14 Series H63-112:
 

Frame size  Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 255
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 305
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 440
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 480

YVP B3 Series H63-180:

Frame size Installation Dimensions (mm)
A B C D E F G H K AB AC HD L
63 100 80 40 Φ11 23 4 12.5 63 7 135 120×120 167 260
71 112 90 45 Φ14 30 5 16 71 7 137 130×130 178 295
80 125 100 50 Φ19 40 6 21.5 80 10 155 145×145 190 340
90S 140 100 56 Φ24 50 8 27 90 10 175 160×160 205 390
90L 140 125 56 Φ24 50 8 27 90 10 175 160×160 205 400
100L 160 140 63 Φ28 60 8 31 100 12 200 185×185 240 430
112M 190 140 70 Φ28 60 8 31 112 12 230 200×200 270 460
132S 216 140 89 Φ38 80 10 41 132 12 270 245×245 315 525
132M 216 178 89 Φ38 80 10 41 132 12 270 245×245 315 525
160M 254 210 108 Φ42 110 12 45 160 14.5 320 335×335 450 850
160L 254 254 108 Φ42 110 12 45 160 14.5 320 335×335 450 870
180M 279 241 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 880
180L 279 279 121 Φ48 110 14 51.5 180 14.5 355 370×370 500 980

YVP B5 Series H63-180:
 

C Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 115 95 140 10 3 120×120 104 260
71 Φ14 30 5 16 130 110 160 10 3.5 130×130 107 295
80M Φ19 40 6 21.5 165 130 200 12 3.5 145×145 115 340
90S Φ24 50 8 27 165 130 200 12 3.5 160×160 122 390
90L Φ24 50 8 27 165 130 200 12 3.5 160×160 122 400
100L Φ28 60 8 31 215 180 250 14.5 4 185×185 137 430
112M Φ28 60 8 31 215 180 250 14.5 4 200×200 155 460
132S Φ38 80 10 41 265 230 300 14.5 4 245×245 180 525
132M Φ38 80 10 41 265 230 300 14.5 4 245×245 180 252
160M Φ42 110 12 45 300 250 350 18.5 5 335×335 290 850
160L Φ42 110 12 45 300 250 350 18.5 5 335×335 290 870
180M Φ48 110 14 51.5 300 250 350 18.5 5 370×370 340 880
180L Φ48 110 14 51.5 300 250 350 18.4 5 370×370 340 980

YVP B14 Series H63-112:
 

Frame size Installation Dimensions (mm)
D E F G M N P S T AC HD L
63 Φ11 23 4 12.5 75 60 90 M5 2.5 120×120 104 260
71 Φ14 30 5 16 85 70 105 M6 2.5 130×130 107 295
80 Φ19 40 6 21.5 100 80 110 M6 3 145×145 115 340
90S Φ24 50 8 27 115 95 120 M8 3 160×160 122 390
90L Φ24 50 8 27 115 95 120 M8 3 160×160 122 400
100L Φ28 60 8 31 130 110 155 M8 3.5 185×185 137 430
112M Φ28 60 8 31 130 110 160 M8 3.5 200×200 155 460

 

Product Parameters

YS/MS Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE2) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YS-5612 0.09  1/8 2680 62.0 0.68 0.32 0.307 2.3 2.3 6.0
YS-5622 0.12  1/6 2660 67.0 0.71 0.38 0.410 2.3 2.3 6.0
YS-6312 0.18  1/4 2710 69.0 0.75 0.53 0.614 2.3 2.3 6.0
YS-6322 0.25  1/3 2730 72.0 0.78 0.68 0.853 2.3 2.3 6.0
YS-7112 0.37  1/2 2760 73.5 0.80 0.96 1.260 2.3 2.3 6.0
YS-7122 0.55  3/4 2770 75.5 0.82 1.35 1.880 2.3 2.3 6.0
YS-8012 0.75 1.0 2770 76.5 0.85 1.75 2.560 2.2 2.3 6.0
YS-8571 1.10 1.5 2800 77.0 0.85 2.55 3.750 2.2 2.3 7.0
YS-90S-2 1.50 2.0 2840 78.5 0.85 3.42 5.040 2.2 2.3 7.0
YS-90L-2 2.20 3.0 2840 81.0 0.86 4.80 7.400 2.2 2.3 7.0
YS-100L-2 3.00 4.0 2890 84.6 0.87 6.17 9.910 2.2 2.3 7.8
YS-5614 0.06 1/12 1320 56.0 0.58 0.28 0.410 2.4 2.4 6.0
YS-5624 0.09  1/8 1320 58.0 0.61 0.39 0.614 2.4 2.4 6.0
YS-6314 0.12  1/6 1350 60.0 0.63 0.48 0.819 2.4 2.4 6.0
YS-6324 0.18  1/4 1350 64.0 0.66 0.65 1.230 2.4 2.4 6.0
YS-7114 0.25  1/3 1350 67.0 0.68 0.83 1.710 2.4 2.4 6.0
YS-7124 0.37  1/2 1350 69.5 0.72 1.12 2.520 2.4 2.4 6.0
YS-8014 0.55  3/4 1380 73.5 0.73 1.56 3.750 2.4 2.4 6.0
YS-8571 0.75 1.0 1390 75.5 0.75 2.01 5.120 2.3 2.4 6.5
YS-90S-4 1.10 1.5 1400 78.0 0.78 2.75 7.400 2.3 2.4 6.5
YS-90L-4 1.50 2.0 1400 79.0 0.79 3.65 10.100 2.3 2.4 6.5
YS-100L1-4 2.20 3.0 1440 84.3 0.81 4.90 14.600 2.3 2.3 7.6
YS-100L2-4 3.00 4.0 1440 85.5 0.82 6.50 19.900 2.3 2.3 7.6
YS-7116 0.18 1/4 910 59.0 0.61 0.76 1.890 2.0 2.0 5.5
YS-7126 0.25 1/3 910 63.0 0.62 0.97 2.260 2.0 2.0 5.5
YS-8016 0.37 1/2 910 68.0 0.62 1.33 3.880 2.0 2.0 5.5
YS-8026 0.55 3/4 910 71.0 0.64 1.84 5.770 2.0 2.0 5.5
YS-90S-6 0.75 1.0 920 73.0 0.68 2.30 7.790 2.0 2.1 5.5
YS-90L-6 1.10 1.5 920 74.0 0.70 3.23 11.400 2.0 2.1 6.0
YS-100L-6 1.50 2.0 940 79.0 0.75 3.38 15.200 2.0 2.1 6.5
YS-711-8 0.09 0.12 600 40.0 0.57 0.60 1.950 1.8 1.9 2.8
YS-712-8 0.12 0.18 600 45.0 0.57 0.71 2.160 1.8 1.9 2.8
YS-801-8 0.18 0.25 645 51.0 0.61 0.88 2.490 1.8 2.0 3.3
YS-802-8 0.25 0.37 645 54.0 0.61 1.15 3.640 1.8 2.0 3.3
YS-90S-8 0.37 0.50 670 62.0 0.61 1.49 5.120 1.8 2.0 4.0
YS-90L-8 0.55 0.75 670 63.0 0.61 2.17 7.610 1.8 2.1 4.0

YE3 Series:

TYPE RATED OUTPUT RATED
SPEED
EFFICIENCY POWER
FOCTOR
RATED
CURRENT
RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TOROUE LOCKED ROTOR TORQUE
RATED TORQUE RATED TORQUE RATED CURRENT
  KW HP rpm η%(IE3) cosφ A Nm Ts/Tn Tmax/Tn IS/In
YE3-801-2 0.75 1.0 2880 80.7 0.82 1.72 2.49 2.3 2.3 7.0
YE3-802-2 1.10 1.5 2880 82.7 0.83 2.43 3.65 2.2 2.3 7.3
YE3-90S-2 1.50 2.0 2895 84.2 0.84 3.22 4.95 2.2 2.3 7.6
YE3-90L-2 2.20 3.0 2895 85.9 0.85 4.58 7.26 2.2 2.3 7.6
YE3-100L-2 3.00 4.0 2895 87.1 0.87 6.02 9.90 2.2 2.3 7.8
YE3-160L-2 18.50 25.0 2940 92.4 0.89 34.20 60.10 2.0 2.3 8.2
YE3-802-4 0.75 1.0 1420 82.5 0.75 1.84 5.04 2.3 2.3 6.6
YE3-90s-4 1.10 1.5 1445 84.1 0.76 2.61 7.27 2.3 2.3 6.8
YE3-90L-4 1.50 2.0 1445 85.3 0.77 3.47 9.91 2.3 2.3 7.0
YE3-100L1-4 2.20 3.0 1435 86.7 0.81 4.76 14.60 2.3 2.3 7.6
YE3-100L2-4 3.00 4.0 1435 87.7 0.82 6.34 20.00 2.3 2.3 7.6
YE3-112M-4 4.00 5.5 1440 88.6 0.82 8.37 26.50 2.2 2.3 7.8
YE3-132S-4 5.50 7.5 1460 89.6 0.83 11.20 36.00 2.0 2.3 7.9
YE3-132M-4 7.50 10.0 1460 90.4 0.84 15.00 49.10 2.0 2.3 7.5
YE3-160M-4 11.00 15.0 1465 91.4 0.85 21.50 71.70 2.2 2.3 7.7
YE3-160L-4 15.00 20.0 1465 92.1 0.86 28.80 97.80 2.2 2.3 7.8
YE3-180M-4 18.50 25.0 1470 92.6 0.86 35.30 120.20 2.0 2.3 7.8
YE3-180L-4 22.00 30.0 1470 93 0.86 41.80 142.90 2.0 2.3 7.8
YE3-90S-6 0.75 1.0 935 78.9 0.71 2.03 7.66 2.0 2.1 6.0
YE3-90L-6 1.10 1.5 945 81 0.73 2.83 11.10 2.0 2.1 6.0
YE3-100L-6 1.50 2.0 949 82.5 0.73 3.78 15.10 2.0 2.1 6.5
YE3-112M-6 2.20 3.0 955 84.3 0.74 5.36 22.00 2.0 2.1 6.6
YE3-132S-6 3.00 4.0 968 85.6 0.74 7.20 29.60 2.0 2.1 6.8
YE3-132M1-6 4.00 5.5 968 86.8 0.74 9.46 39.50 2.0 2.1 6.8
YE3-132M2-6 5.50 7.5 968 88 0.75 12.70 54.30 2.0 2.1 7.0
YE3-160M-6 7.50 10.0 970 89.1 0.79 16.20 73.80 2.0 2.1 7.0
YE3-160L-6 11.00 15.0 970 90.3 0.8 23.10 108.30 2.0 2.1 6.2
YE3-180L-6 18.50 20.0 975 91.2 0.81 30.90 146.90 2.0 2.1 7.3

YE4 Series:

  OUTPUT RATED CURRENT ROTATE SPEED EFFICIENCY POWER FOCTOR RATED TORQUE LOCKED ROTOR TORQUE LOCKED ROTOR CURRENT MAXIMUM TORQUE NOISE
TYPE RATED TORQUE RATED CURRENT RATED TORQUE
  kW A r/min Eff.%(IE4) P.F N.m Tst Ist Tmax dB(A)
  TN IN TN
SYNCHRO-SPEED 3000r/min
YE4-80M1-2 0.75 1.6 2895 83.5 0.83 2.47 2.2 8.5 2.3 62
YE4-80M2-2 1.1 2.4 2895 85.2 0.83 3.63 2.2 8.5 2.3 62
YE4-90S-2 1.5 3.1 2880 86.5 0.85 4.97 2.2 9.0 2.3 67
YE4-90L-2 2.2 4.4 2880 88.0 0.86 7.30 2.2 9.0 2.3 67
YE4-100L-2 3 5.9 2905 89.1 0.87 9.86 2.2 9.5 2.3 74
YE4-112M-2 4 7.7 2920 90.0 0.88 13.10 2.2 9.5 2.3 77
YE4-132S1-2 5.5 10.4 2945 90.0 0.88 17.80 2.0 9.5 2.3 79
YE4-132S2-2 7.5 14 2940 91.7 0.89 24.40 2.0 9.5 2.3 79
YE4-160M1-2 11 20.3 2965 92.6 0.89 35.40 2.0 9.5 2.3 81
YE4-160M2-2 15 27.5 2965 93.3 0.89 48.30 2.0 9.5 2.3 81
YE4-160L-2 18.5 33.7 2965 93.7 0.89 59.60 2.0 9.5 2.3 81
SYNCHRO-SPEED1500r/min
YE4-80M1-4 0.55 1.4 1440 83.9 0.74 3.65 2.4 6.6 2.3 56
YE4-80M2-4 0.75 1.8 1440 85.7 0.74 4.97 2.3 8.5 2.3 56
YE4-90S-4 1.1 2.6 1445 87.2 0.75 7.27 2.3 8.5 2.3 59
YE4-90L-4 1.5 3.4 1445 88.2 0.76 9.91 2.3 9.0 2.3 59
YE4-100L1-4 2.2 4.7 1450 89.5 0.79 14.50 2.3 9.0 2.3 64
YE4-100L2-4 3 6.3 1450 90.4 0.8 19.80 2.3 9.5 2.3 64
YE4-112M-4 4 8.3 1460 91.1 0.8 26.20 2.3 9.5 2.3 65
YE4-132S-4 5.5 11.4 1475 91.1 0.8 35.60 2.0 9.5 2.3 71
YE4-132M-4 7.5 15.2 1470 92.6 0.81 48.70 2.0 9.5 2.3 71
YE4-160M-4 11 21.6 1470 93.3 0.83 71.50 2.0 9.5 2.3 73
YE4-160L-4 15 28.9 1470 93.9 0.84 97.40 2.0 9.5 2.3 73
SYNCHRO-SPEED1000r/min
YE4-80M1-6 0.37 1.1 940 78.0 0.68 3.76 1.9 6.0 2.1 54
YE4-80M2-6 0.55 1.5 940 80.9 0.68 5.59 1.9 6.0 2.1 54
YE4-90S-6 0.75 2 950 82.7 0.7 7.54 2.1 7.5 2.1 57
YE4-90L-6 1.1 2.8 950 84.5 0.7 11.10 2.1 7.5 2.1 57
YE4-100L-6 1.5 3.7 960 85.9 0.71 14.90 2.1 7.5 2.1 61
YE4-112M-6 2.2 5.4 975 87.4 0.71 21.50 2.1 7.5 2.1 65
YE4-132S-6 3 7.2 985 88.6 0.71 29.10 2.0 7.5 2.1 69
YE4-132M1-6 4 9.4 985 89.5 0.72 38.80 2.0 8.0 2.1 69
YE4-132M2-6 5.5 12.8 980 90.5 0.72 53.60 2.0 8.0 2.1 69
YE4-160M-6 7.5 16.4 980 91.3 0.76 73.10 2.0 8.0 2.1 73
YE4-160L-6 11 23.5 980 92.3 0.77 107.00 2.0 8.5 2.1 73

YEJ 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 3.5 0.10
YEJ-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 3.5 0.10
YEJ-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 4.0 0.10
YEJ-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 4.0 0.10
YEJ-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 7.5 0.10
YEJ-802-2 1.10 2840 77.0 0.84 2.55 3.70 2.2 2.3 7.5 0.10
YEJ-90S-2 1.50 2840 79.0 0.84 3.39 5.04 2.2 2.3 15 0.15
YEJ-90L-2 2.20 2840 81.0 0.85 4.80 7.40 2.2 2.3 15 0.15
YEJ-100L1-2 3.00 2860 83.0 0.87 6.31 10.00 2.2 2.3 30 0.15
YEJ-100L2-2 4.00 2880 85.0 0.88 8.22 13.30 2.2 2.3 40 0.15
YEJ-112M-2 5.50 2910 86.0 0.88 11.2 18.00 2.2 2.3 80 0.15
YEJ-132S-2 7.00 2910 87.0 0.88 15.1 24.60 2.2 2.3 80 0.15
YEJ-132M-2 11.00 2930 88.0 0.89 21.3 35.90 2.2 2.3 150 0.30
YEJ-160M-2 15.00 2930 89.0 0.89 28.8 48.90 2.2 2.2 150 0.30
YEJ-160L-2 18.50 2935 90.0 0.90 34.7 60.20 2.2 2.2 150 0.30
YEJ-180M-2 22.00 2935 90.0 0.90 41.3 71.60 2.2 2.2 200 0.30

YEJ 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 3.5 0.10
YEJ-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 3.5 0.10
YEJ-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 4.0 0.10
YEJ-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 4.0 0.10
YEJ-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 7.5 0.10
YEJ-802-4 0.75 1405 73.0 0.76 2.02 5.10 2.2 2.4 7.5 0.10
YEJ-90S-4 1.10 1445 75.0 0.77 2.82 7.27 2.2 2.3 15 0.15
YEJ-90L-4 1.50 1445 78.0 0.79 3.7 9.91 2.2 2.3 15 0.15
YEJ-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 30 0.15
YEJ-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 30 0.15
YEJ-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 40 0.15
YEJ-132S-4 5.50 1440 85.0 0.83 11.7 36.50 2.2 2.3 80 0.15
YEJ-132M-4 7.50 1440 87.0 0.84 15.6 49.70 2.2 2.3 80 0.15
YEJ-160M-4 11.00 1450 88.0 0.85 21.3 72.40 2.2 2.2 150 0.30
YEJ-160L-4 15.00 1450 89.0 0.85 30.1 98.80 2.2 2.2 150 0.30
YEJ-180M-4 18.50 1455 90.5 0.86 36.5 121.40 2.2 2.2 150 0.30
YEJ-180L-4 22.00 1455 91.0 0.86 43.1 144.40 2.0 2.2 200 0.30

YEJ 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE STATIC BRAKE TCRQUE BRAKE TIME
RATED TORQUE RATED TORQUE DC
  KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn NM  S
YEJ-711-6 0.18 900 56.0 0.66 0.71 19.10 1.9 2.0 4.0 0.10
YEJ-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 4.0 0.10
YEJ-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 7.5 0.10
YEJ-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 7.5 0.10
YEJ-90S-6 0.75 930 69.0 0.72 2.26 7.70 2.1 2.1 15 0.15
YEJ-90L-6 1.10 940 72.0 0.73 3.14 11.20 2.1 2.1 15 0.15
YEJ-100L-6 1.50 940 76.0 0.76 3.95 15.20 2.2 2.1 30 0.15
YEJ-112M-6 2.20 96o 79.0 0.76 5.57 21.90 2.2 2.1 40 0.15
YEJ-132S-6 3.00 960 81.0 0.76 7.40 29.80 2.2 2.1 80 0.15
YEJ-132M1-6 4.00 960 82.0 0.76 9.63 39.80 2.2 2.1 80 0.15
YEJ-132M2-6 5.50 960 84.0 0.77 12.90 54.70 2.2 2.1 150 0.30
YEJ-160M-6 7.50 970 86.0 0.77 17.00 73.80 1.8 2.1 150 0.30
YEJ-160L-6 11.00 970 87.5 0.78 24.30 108.30 1.9 2.1 150 0.30
YEJ-180L-6 15.00 970 89.0 0.81 31.60 147.70 2.1 2.1 200 0.30

YVP 3000r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-2 0.18 2800 65.0 0.80 0.53 0.61 2.2 2.2 380 220 2800
YVP-632-2 0.25 2800 68.0 0.81 0.69 0.85 2.2 2.2 380 220 2800
YVP-711-2 0.37 2830 70.0 0.81 0.99 1.25 2.2 2.2 380 220 2800
YVP-712-2 0.55 2830 73.0 0.82 1.40 1.86 2.2 2.3 380 220 2800
YVP-801-2 0.75 2840 75.0 0.83 1.83 2.52 2.2 2.3 380 220 2800
YVP-802-2 1.10 2840 77.0 0.85 2.55 3.70 2.2 2.3 380 220 2800
YVP-90S-2 1.50 2840 79.0 0.85 3.39 5.04 2.2 2.3 380 220 2800
YVP-90L-2 2.20 2840 81.0 0.86 4.80 7.40 2.2 2.3 380 220 2800
YVP-100L-2 3.00 2860 83.0 0.87 6.31 10.0 2.2 2.3 380 220 2800
YVP-112M-2 4.00 2880 84.0 0.88 8.22 13.3 2.2 2.3 380 220 2800
YVP-132S1-2 5.50 2910 85.0 0.88 11.2 18.0 2.2 2.3 380 220 2800
YVP-132S2-2 7.50 2910 86.0 0.88 15.1 24.6 2.2 2.3 380 220 2800
YVP-160M1-2 11.0 2930 88.0 0.89 21.3 35.9 2.2 2.3 380 220 2800
YVP-160M2-2 15.0 2930 89.0 0.89 28.8 48.9 2.2 2.3 380 220 2800
YVP-160L-2 18.5 2935 90.0 0.90 34.7 60.2 2.2 2.3 380 220 2800
YVP-180M-2 22.0 2935 90.0 0.90 41.3 71.6 2.0 2.3 380 220 2800

YVP 1500r/min 380V 50Hz:

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-631-4 0.12 1360 57.0 0.72 0.44 0.84 2.2 2.0 380 220 2800
YVP-632-4 0.18 1360 60.0 0.73 0.62 1.26 2.2 2.0 380 220 2800
YVP-711-4 0.25 1375 65.0 0.74 0.79 1.74 2.2 2.0 380 220 2800
YVP-712-4 0.37 1375 67.0 0.75 1.12 2.57 2.2 2.0 380 220 2800
YVP-801-4 0.55 1405 71.0 0.75 1.57 3.74 2.2 2.4 380 220 2800
YVP-802-4 0.75 1405 73.0 0.77 2.02 5.10 2.2 2.4 380 220 2800
YVP-90S-4 1.10 1445 75.0 0.79 2.82 7.27 2.2 2.3 380 220 2800
YVP-90L-4 1.50 1445 78.0 0.79 3.70 9.91 2.2 2.3 380 220 2800
YVP-100L1-4 2.20 1440 80.0 0.81 5.16 14.60 2.2 2.3 380 220 2800
YVP-100L2-4 3.00 1440 82.0 0.82 6.78 19.90 2.2 2.3 380 220 2800
YVP-112M-4 4.00 1440 84.0 0.82 8.82 26.50 2.2 2.3 380 220 2800
YVP-132S-4 5.50 1440 85.0 0.84 11.70 36.50 2.2 2.3 380 220 2800
YVP-132M-4 7.50 1440 87.0 0.84 15.60 49.70 2.2 2.3 380 220 2800
YVP-160M-4 11.0 1450 88.0 0.85 21.30 72.40 2.2 2.2 380 220 2800
YVP-160L-4 15.0 1450 89.0 0.85 30.10 98.80 2.2 2.2 380 220 2800
YVP-180M-4 18.5 1455 90.5 0.86 36.50 121.40 2.2 2.2 380 220 2800
YVP-180L-4 22.0 1455 91.0 0.86 43.10 144.40 2.0 2.2 380 220 2800

YVP 1000r/min 380V 50Hz: 

TYPE RATED OUTPUT RATED SPEED EFFICENCY POWER FOCTOR RATED CURRENT RATED TORQUE LOCKED ROTOR TORQUE MAXIMUM TORQUE FREOUENCY CONVERSION BLOWER
RATED TORQUE RATED TORQUE VOLTAGEV SPEED
KW rpm η% COSφ A Nm Ts/Tn Tmax/Tn THREE PHASE SINGLE PHASE RPM
YVP-711-6 0.18 900 58.0 0.66 0.71 1.91 1.9 2.0 380 220 2800
YVP-712-6 0.25 900 59.0 0.68 0.95 2.65 1.9 2.0 380 220 2800
YVP-801-6 0.37 910 62.0 0.70 1.30 3.88 1.9 2.0 380 220 2800
YVP-802-6 0.55 910 65.0 0.72 1.79 5.77 1.9 2.1 380 220 2800
YVP-90S-6 0.75 930 70.0 0.72 2.26 7.70 2.1 2.1 380 220 2800
YVP-90L-6 1.10 940 73.0 0.73 3.14 11.2 2.1 2.1 380 220 2800
YVP-100L-6 1.50 940 76.0 0.76 3.95 15.2 2.2 2.1 380 220 2800
YVP-112M-6 2.20 960 79.0 0.76 5.57 21.9 2.2 2.1 380 220 2800
YVP-132S-6 3.00 960 81.0 0.76 7.40 29.8 2.2 2.1 380 220 2800
YVP-132M1-6 4.00 960 83.0 0.76 9.63 39.8 2.2 2.1 380 220 2800
YVP-132M2-6 5.50 960 84.0 0.77 12.9 54.7 2.2 2.1 380 220 2800
YVP-160M-6 7.50 970 86.0 0.78 17.0 73.8 1.8 2.1 380 220 2800
YVP-160L-6 11.0 970 87.0 0.79 24.3 108.3 1.9 2.1 380 220 2800
YVP-180L-6 15.0 970 89.0 0.81 31.6 147.7 2.1 2.1 380 220 2800

 

 

Company Profile

 

TLWERK, established by the R&D, production and sales team with more than 10 years of technical experience, is a professional trade company.

We focus on the R&D, technology and sales services of induction motors and motor power source systems, especially for the customized development of products according to the specific application requirements of customers.

The products are produced and tested by our professional motor manufacturers and related motor system manufacturers in the partnership.

The developed three-phase asynchronous motor series are: YS/MS, YL/ML, YE3, YE4, YEJ, YVP and permanent magnet motors.

Our products have got a good domestic market and a good fame in more than 30 provinces and cities in China, and now gradually expand the international market.

We have our own experienced R&D team, modern production lines and high-precision testing equipment. The manufacturer strictly implements the ISO9001-2015 quality management system, and all products have been inspected, and have obtained national CCC certification and international CE certification, as well as other relevant international certifications. Our motor products are widely used in different fields such as reducers, hydraulic equipment, lifting equipment, fans, wind power, home appliances, food, clothing, papermaking, packaging, ceramics, printing, chemical industry, animal husbandry machinery, woodworking machinery, agriculture and water conservancy.

Production & Workshop

We adhere to the business philosophy of “Life, based on quality; Trust, based on honesty; Win-win cooperation”, and insists on giving back to all customers with high-quality products and comprehensive services!

Certifications

Packaging & Shipping

FAQ

1.How about your MOQ and lead time?
Both MOQ and lead time depends on specific products. Generally speaking, it cost 10-30 days.

2.Can I get sample?
Yes. We offer sample motor.

3.Is customized service available?
OEM & ODM both are available. Please inform us with output power, speed rpm, output torque, using voltage and application range.

4. What is your payment term?
30% T/T in advance, 70% balance before shipment
30% T/T in advance, 70% balance 30 days after BL date by ocean, 15 days after AWB date by air, after a long-term stable cooperation.

5. What about warranty?
One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.

6.Why us?
* Professional factory for Electric Motor in China
*Safety / Energy Consumption / Superior Life
* Full of export experiences.
* 100% tested before delivery
* A complete set of motor solutions can be provided.
* Perfect performance, low noise, slight vibration, reliable running, good appearance, small volume, light weight and easy maintenance.
* CE/ISO Approved
 

Before Sale After Sale
1 Sample Confirmation 1 Comprehensive service with separate after-sale team
Providing information consulting and technical guidance. 2 Satisfied solution while any problem identified.
3 Packaging can be customized. 3 Exclusive and unique solution provided by professional engineers.
4 Reply to your enquiry in 24 working hours. 4 New craft, new technology and other related advisory services.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal
Speed: Constant Speed
Number of Stator: Single-Phase and Three-Phase
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

China Standard 4kw 5...5HP Electric Motors 4kw Permanent Magnet Synchronous Motor AC Motor   with high quality China Standard 4kw 5...5HP Electric Motors 4kw Permanent Magnet Synchronous Motor AC Motor   with high quality
editor by CX 2024-04-23

China Good quality 220V Voltage Long Life Brush Step Motors Ac Reversible Gear Synchronous motor vacuum pump electric

Product Description

Model Selection

ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
 

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Detailed Photos

Product Parameters

Power: 6W, 10W, 15W, 25W, 40W, 60W, 90W, 100, 120W
Dimension: 60, 70, 80, 90mm
Voltage: 110V, 220V
Frequency: 50Hz, 60Hz
Accessory: Terminal box, theremal protector, pedestal of the motor, fan

Model Type Output power Voltage Frequency Current Starting Rated Rated
Upper:Pinion Shaft
Below:Round Shaft
Lead Wire Type Dimensiors (1) Terminal Box Type Dimensions(2) W V Hz A mN.m mN.m r/min
5IK90GU-AF 5IK90GU-AFT 90 1ph 100 50 1.55 450 700 1250
(5IK90A-AF) (5IK90A-AFT) 60 1.85 570 1550
5IK90GU-EF 5IK90GU-EFT 90 1ph 110 60 1.4 500 570 1550
(5IK90A-EF ) (5IK90A-EFT) 1ph 120 1.45
5IK90GU-CF 5IK90GU-CFT 90 1ph 220 50 0.72 450 700 1250
(5IK90A-CF) (5IK90A-CFT) 1ph 230 0.7
5IK90GU-HF 5IK90GU-HFT 90 1ph 220 60 0.71 450 570 1550
(5IK90A-HF ) (5IK90A-HFT) 1ph 230 0.75
5IK90GU-SF 5IK90GU-SFT 90 3ph 220 50 0.6 1350 700 1250
(5IK90A-SF) (5IK90A-SFT) 60 0.55 1100 570 1550

Parallel Shaft Gearhead:

Gearhead Type Gearhead Model Gear Ratio
Long Life • Low Noise 5GN(   )K 3,3.6,5,6,7.5,9, 12.5, 15,18,25,30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200
5GN10XK ( Decimal Gearhead )

Other Related Products

Click here to find what you are looking for:

Company Profile

 

FAQ

Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Speed: Constant Speed
Number of Stator: Two-Phase
Excitation Mode: PM-Permanent Magnet
Function: Driving
Number of Poles: 2
Operate Mode: The Three Single Phase
Customization:
Available

|

China Good quality 220V Voltage Long Life Brush Step Motors Ac Reversible Gear Synchronous motor   vacuum pump electricChina Good quality 220V Voltage Long Life Brush Step Motors Ac Reversible Gear Synchronous motor   vacuum pump electric
editor by CX 2024-04-17

China supplier Two-Phase CE Certification Brush Step Motors Synchronous 220v Gear Ac Reversible Motor vacuum pump electric

Product Description

Model Selection

ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
 

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Detailed Photos

Product Parameters

Power: 6W, 10W, 15W, 25W, 40W, 60W, 90W, 100, 120W
Dimension: 60, 70, 80, 90mm
Voltage: 110V, 220V
Frequency: 50Hz, 60Hz
Accessory: Terminal box, theremal protector, pedestal of the motor, fan

Model Type Output power Voltage Frequency Current Starting Rated Rated
Upper:Pinion Shaft
Below:Round Shaft
Lead Wire Type Dimensiors (1) Terminal Box Type Dimensions(2) W V Hz A mN.m mN.m r/min
5IK90GU-AF 5IK90GU-AFT 90 1ph 100 50 1.55 450 700 1250
(5IK90A-AF) (5IK90A-AFT) 60 1.85 570 1550
5IK90GU-EF 5IK90GU-EFT 90 1ph 110 60 1.4 500 570 1550
(5IK90A-EF ) (5IK90A-EFT) 1ph 120 1.45
5IK90GU-CF 5IK90GU-CFT 90 1ph 220 50 0.72 450 700 1250
(5IK90A-CF) (5IK90A-CFT) 1ph 230 0.7
5IK90GU-HF 5IK90GU-HFT 90 1ph 220 60 0.71 450 570 1550
(5IK90A-HF ) (5IK90A-HFT) 1ph 230 0.75
5IK90GU-SF 5IK90GU-SFT 90 3ph 220 50 0.6 1350 700 1250
(5IK90A-SF) (5IK90A-SFT) 60 0.55 1100 570 1550

Parallel Shaft Gearhead:

Gearhead Type Gearhead Model Gear Ratio
Long Life • Low Noise 5GN(   )K 3,3.6,5,6,7.5,9, 12.5, 15,18,25,30, 36, 50, 60, 75, 90, 100, 120, 150, 180, 200
5GN10XK ( Decimal Gearhead )

Other Related Products

Click here to find what you are looking for:

Company Profile

 

FAQ

Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. 

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Speed: Constant Speed
Number of Stator: Two-Phase
Excitation Mode: PM-Permanent Magnet
Function: Driving
Number of Poles: 2
Operate Mode: The Three Single Phase
Customization:
Available

|

China supplier Two-Phase CE Certification Brush Step Motors Synchronous 220v Gear Ac Reversible Motor   vacuum pump electricChina supplier Two-Phase CE Certification Brush Step Motors Synchronous 220v Gear Ac Reversible Motor   vacuum pump electric
editor by CX 2024-04-16

China wholesaler Tyl (Liquid Cooling) Series Permanent Magnet Synchronous Servo Motors supplier

Product Description

Product Description

TYL series (liquid-cooled) permanent magnet synchronous servo motor is a product completely independently developed by our company. It is mainly suitable for occasions where the environment is dusty, the motor volume is relatively compact, or the motor temperature rise is required to be relatively low. For example, profile stretching and extrusion situations, metal cable drawing situations, ceramic production workshops, die-casting workshops, wood pellet machines, grinding machines, etc.
The power range of this series of motors is: 75-560kw.
This series of products is recommended to be cooled with oil. You can also use automobile antifreeze for cooling, but you cannot directly use untreated tap water for cooling.

 

Application Condition

K uses rings: general that do not contain flammable, volatile or corrosive gases
1.Place and machinery without independent requirements
2. Ring temperature: varies with seasons, but not more than 40t
3. Hai Yu: no more than 000m
4. Installation structure: IMB35, IMB5
5. Protection level: IP54
6. Surface paint: black

 

Technical Data

 

 

Note:This series of products is recommended to be cooled with oil. You can also use automobile antifreeze for cooling, but you cannot directly use untreated tap water for cooling.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving
Casing Protection: Protection Type
Number of Poles: 8
Customization:
Available

|

China wholesaler Tyl (Liquid Cooling) Series Permanent Magnet Synchronous Servo Motors   supplier China wholesaler Tyl (Liquid Cooling) Series Permanent Magnet Synchronous Servo Motors   supplier
editor by CX 2024-04-08

China Custom Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors vacuum pump and compressor

Product Description

Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors

Application of AC Motor

AC motors are used in a wide variety of applications, including:

  • Pumps: AC motors are used to power pumps in a variety of applications, such as water, sewage, and chemical processing.
  • Fans: AC motors are used to power fans in a variety of applications, such as ventilation, air conditioning, and refrigeration.
  • Compressors: AC motors are used to power compressors in a variety of applications, such as air conditioning, refrigeration, and food processing.
  • Conveyors: AC motors are used to power conveyors in a variety of applications, such as manufacturing, packaging, and distribution.
  • Machine tools: AC motors are used to power machine tools in a variety of applications, such as milling, turning, and drilling.
  • Elevators: AC motors are used to power elevators in a variety of applications, such as residential, commercial, and industrial buildings.
  • Wind turbines: AC motors are used to power wind turbines in a variety of applications, such as generating electricity and providing backup power.
  • Electric vehicles: AC motors are used to power electric vehicles in a variety of applications, such as cars, trucks, and buses.

AC motors are a versatile type of motor that can be used in a wide variety of applications. They are characterized by their high efficiency, reliability, and low maintenance. AC motors are also relatively inexpensive, making them a good choice for a wide range of applications.

Here are some of the advantages of using AC motors:

  • High efficiency: AC motors are more efficient than other types of motors, such as DC motors. This is because AC motors can operate at a wider range of speeds and loads.
  • Reliability: AC motors are more reliable than other types of motors. This is because AC motors have fewer moving parts and are less prone to wear and tear.
  • Low maintenance: AC motors require less maintenance than other types of motors. This is because AC motors have fewer moving parts and are less prone to wear and tear.
  • Inexpensive: AC motors are relatively inexpensive than other types of motors. This is because AC motors are mass-produced and are available in a wide range of sizes and configurations.

Overall, AC motors are a versatile, efficient, reliable, and inexpensive type of motor that can be used in a wide range of applications.

As the power requirements of single load systems are usually small, all our homes, offices are supplied with a single-phase A.C. supply only. To get proper working conditions using this single-phase supply, compatible motors have to be used. Besides being compatible, the motors have to be economical, reliable and easy to repair. One can find all of these characteristics in a single phase induction motor readily. Similar to three-phase motors but with some modifications, single-phase induction motors are a great choice for domestic appliances. Their simple design and low cost have attracted many applications.

Single-phase induction motors are the simple motors which operate on single -phase A.C. and in which torque is produced due to induction of electricity caused by the alternating magnetic fields

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed:
Number of Stator:
Function: Driving
Casing Protection:
Number of Poles:
Samples:
US$ 999/Piece
1 Piece(Min.Order)

|

China Custom Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors   vacuum pump and compressor	China Custom Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors   vacuum pump and compressor
editor by CX 2024-04-02

China manufacturer Electrical Motors High Speed Electromagnetic Brake AC Three Single Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper Synchronous Electrical Motors vacuum pump connector

Product Description

Electrical Motors High Speed Electromagnetic Brake AC Three Single Phase Scooters Elevator Gear Motor Shaft  Engine Drive Stepper Synchronous Electrical Motors

Application of Electric Motor

Electric motors are used in a wide variety of applications, including:

  • Home appliances. Electric motors are used in many home appliances, such as refrigerators, washing machines, and vacuum cleaners.
  • Office equipment. Electric motors are used in many office equipment, such as printers, copiers, and scanners.
  • Industrial equipment. Electric motors are used in many industrial equipment, such as conveyor belts, pumps, and drills.
  • Transportation. Electric motors are used in many transportation vehicles, such as cars, trucks, and buses.
  • Other applications. Electric motors are also used in a variety of other applications, such as robots, wind turbines, and elevators.

Here are some of the advantages of using electric motors:

  • Efficiency. Electric motors are very efficient at converting electrical energy into mechanical energy.
  • Versatility. Electric motors are available in a wide variety of sizes and styles, which makes them adaptable to a wide range of applications.
  • Durability. Electric motors are made of strong materials, such as steel or cast iron, which makes them durable and long-lasting.

Overall, electric motors are a versatile and beneficial component that can be used in a wide variety of applications. They can help to improve efficiency, versatility, and durability.

Here are some additional details about the applications of electric motors:

  • Home appliances. Electric motors are used in many home appliances to power the various functions of the appliances. For example, in a refrigerator, the electric motor is used to power the compressor, which circulates the refrigerant through the appliance.
  • Office equipment. Electric motors are used in many office equipment to power the various functions of the equipment. For example, in a printer, the electric motor is used to move the paper through the printer and to operate the print head.
  • Industrial equipment. Electric motors are used in many industrial equipment to power the various functions of the equipment. For example, in a conveyor belt, the electric motor is used to move the belt along the conveyor.
  • Transportation. Electric motors are used in many transportation vehicles to power the vehicles. For example, in a car, the electric motor is used to turn the wheels of the car.
  • Other applications. Electric motors are also used in a variety of other applications, such as robots, wind turbines, and elevators. For example, in a robot, the electric motor is used to move the robot’s arms and legs.

These are just a few examples of the many applications of electric motors. Electric motors are a critical component in many machines and systems, and they play an important role in the efficient and reliable operation of these machines and systems.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Open Type
Number of Poles: 6
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|

China manufacturer Electrical Motors High Speed Electromagnetic Brake AC Three Single Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper Synchronous Electrical Motors   vacuum pump connector	China manufacturer Electrical Motors High Speed Electromagnetic Brake AC Three Single Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper Synchronous Electrical Motors   vacuum pump connector
editor by CX 2024-03-29

China factory 6kv 10kv Big Power High Voltage Three Phase Asynchronous Motors with Hot selling

Product Description

  product/RxyrivtObDVH/China-Typ-Frequency-Variable-Permanent-Magnet-Synchronous-Motor.html
    Xihu (West Lake) Dis. Xihu (West Lake) Dis.i Motor Co.,Ltd which was founded in 1969, is national appointed as chief factory for small and medium-size motor by machinery ministry. It has 50 years history of producing electric Motor.In November 2 square meter’s workshop,8200 square meter’s technology Research building, 23 assembly lines and 2300 sets of producing Machines, and motor testing center (10000KW).The main electric motors for technical research are high-efficiency motor with energy saving, VFD motor, large-size motor and special motor. The company has 1200 staff and workers in total, there are 130 engineers who work on scientific, technical research and test development, Which build “ZheJiang technical center”, “ZheJiang Electrical Engineering Center “. The company passes ISO9001:2008, ISO14001:2004, GB/T28001. 
   
     Main products: high-efficiency motor (YE3 80-355, YE2 56-355), High-efficiency high voltage motor (YX/YXKK/YXKS series H355-800),compact high voltage motor (YX2 H355-560), VFD motor (YVF2 series H80-450),high voltage VFD motor, low voltage rotor motor (YR series H315-355),YR/YRKK high voltage rotor motor, high-efficiency explosion-proof motor (YB3 series H80-355),TDMK series large-size synchronous motor (specified for mine mill), high voltage explosion-proof motor (YB2 H355-560), Y2 series low voltage big power motor, permanent magnet synchronous motor, YE4 series super premium efficiency motor, special motor for car and other special motors for customers. YE3,JHM,YVF2, YE2 series motors pass “CCC” certificates; YE2, YE3 series high-efficiency motors get “CE” certificates; YE3 premium efficiency motor, CXYT permanent magnet synchronous motor, S18/25 get National energy-saving certificates.

    In year 2016, the company achieved sales revenue RMB 1.52 billion Yuan, incoming tax RMB 60 million yuan, net profit RMB 10.171 million yuan, and top 3 comprehensive strength in field of small-medium electric motors in China.

TK,TAW series large size synchronous motors

General Introductions:

TK series 3 phase synchronous motors used for driving large machinery demanding invariable speed. For example, fan, compressor, ball mill, water pump, rolling mill auxiliary drive, etc. They are characterized by leading power factor that can ameliorate the factor of the net. Reliable operation, high of bigger over load multiple that the same 3 phase AC asynchronous motors. Speed don’t changes with the load. High efficiency, etc.

All motors shall have passed strict electrical inspection and running test with assured performances before delivery. They are featured by advanced technology, reasonable structure, high insulation grad, good electrical characteristic, reasonable operation, convenient installation and maintenance.

The rated frequency is 50HZ and the rated voltage are 380V, 660V, 6000V, 10000V. The basic protection degree of enclosure is IP00 or IP23. Cooling method is IC01. Others special requirements should be negotiate with the manufacture before the order is placed.

Work Conditions:
 

Rated voltage 380~13.8KV
Output power 160KW~4000KW
Poles 10~24
Protection Class IP00/IP23
Insulation Class  F/H temperature rise B
Altitude Not exceed 1000m meters
Rated frequency 50HZ
Duty Continuous(S1)
Ambiemt temperature  -15°C~+40°C
Installation IM7311 and IM5710

The way of excitation is static excitation, also can be made into other way according to user’s requirement. The motors can be made with salt-fog moisture and mould -proof for high elevation.

The above is The Default Parameters, If you have any other special requirements, you can contact us for Customization.

TAW series large size synchronous motors

General Introductions:

     TAW increase-safety brushless excitation synchronous motors are high-and-new technology products developed and manufactured by our company. This series motors can be widely used in petroleum, chemical, fertilizer, refrigeration industries, the locations where hazard gasses place, and can be used to drive reciprocating compressors.

      This series motors adopting the new technique, material and technology in the 1990s, and being of excellent workmanship, this series motors have many features such as compact construction, light weight, attractive appearance, high efficiency,low noise, small vibration, safe operation and easy maintenance.

      Enclosure of this series motors are IP54, cooling method IC81W and IC91W and mounting arrangement is IM7315, IM7311 and IM7111. Available are the motors with the different protection type, cooling form and mounting arrangement according to customer requirements.

Work Conditions:
 

Rated voltage   3KV~13.8KV
Output power   160KW~4000KW
Poles   12~24
Protection Class   IP54
Insulation Class   F/H temperature rise B
Altitude   Not exceed 1000m meters
Rated frequency   50HZ
Duty   Continuous(S1)
Ambiemt temperature   -15°C~+40°C
Ex mark    ExeIIT1, ExeIIT2 and ExeIIT3

Derive on the bassed series, outdoor type (W type) , tropical humidity type(TH type) and tropical humidity outdoor type(THW type) 3 phase synchronour motors also provided. The performance and mounting and overall dimensions are the same with basic series.

The above is The Default Parameters, If you have any other special requirements, you can contact us for Customization.

Q: Are you a factory or trading company?
A: HangZhou XIHU (WEST LAKE) DIS.I is a factory that has been focusing on motors and accessories for more than 50 years.

Q: What about the warranty?
A: We offer 12 month warranty period as the quality guarantee.

Q: Can you do OEM?
A: Yes , we offer OEM.

Q: How about your service?
A: We have pre-sale service, in-sale service and after-sale service.What we pursue is long-term cooperation,
so our principle is customer first.

Q: What are your terms of delivery?
A: Generally we ship in FOB term, but we couldoffer the solution for CNF, CIF and DDP, which all based on your
requirement.

Q: What’s the delivery time?
A: 10 to 30 days after receiving your payment in advance.

Application: Industrial
Speed: Low Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 10
Customization:
Available

|

China factory 6kv 10kv Big Power High Voltage Three Phase Asynchronous Motors   with Hot selling	China factory 6kv 10kv Big Power High Voltage Three Phase Asynchronous Motors   with Hot selling
editor by CX 2023-11-16