Warranty: 3months-1year
Design Quantity: LC31332+LC3722A
Period: three
Variety: Hybrid
Recent / Period: 6.9A
Motor dimensions: NEMA 52 stepper motor
motor shade: black
Motor holding torque: 50N.m
Motor size: 311mm
functioning voltage: a hundred and ten-220VAC
Motor direct wire: three
Motor bodyweight: 26kgs
stage: 3 phase
Driver electricity: 3phase ac 110-220v
Driver coloration: silver
Packaging Information: present box+carton

HangZhou Nema51 50Nm stepper motor with driver kit 6.9A AC220V LC3722HTC+LC31332

3phase Nema51/130mm hybrid stepper motor specification:

3-stage 130 sequence hybrid stepping motor, the selection of high-top quality raw materials and substantial-regular permanent magnet silicon metal, with substantial positioning accuracy, output torque, quick reaction, reduced noise procedure, more secure procedure and other attributes, top quality and trustworthy. Motor size amongst 154mm ~ 311mm, torque variety: 15N.m ~ 50N.m, motor shaft diameter 24mm.

Motor Specification:

Driver description:

LC3722HTC is a 3-stage hybrid stepper motor driver based on DSP control, which is a new generation of digital stepper motor drives that blend innovative DSP management chips with 3-stage inverter travel modules. The generate voltage is AC110V ~ 220, the adaptation recent is under 7.0A, the outer diameter is 57-130MM different varieties of three-period hybrid stepping motor. Positioning accuracy up to 60000 methods / change.

Attributes:
1. Substantial overall performance, low cost 2. With 16 scales consistent torque instant subdivision, Established Screw Shaft Collar the maximum resolution of 60000 actions / turn 3. The highest reaction frequency up to 200KPPS 4. When the stepping pulse stops far more than 1.5S, the coil current is routinely decreased to half of the established existing 5. Optical isolation sign input / output 6. Travel current 1.3A / section to 7.0A / stage 16 information adjustable 7. Solitary electrical power enter, voltage variety: AC110V-220V 8 phase memory operate (Note: the travel stops for far more than 3 seconds right after the travel instantly memorizes the motor stage at the time,
re- energy or When the WF signal goes from minimal to high, the drive routinely recovers the motor period)

Managing existing (A)	LC3722	one.3	one.six	two.1	2.three	two.five	3.	3.two	three.five
D1		OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
D2		OFF	OFF	OFF	OFF	ON	ON	ON	ON
D3		OFF	OFF	ON	ON	OFF	OFF	ON	ON
D4		OFF	ON	OFF	ON	OFF	ON	OFF	ON
Operating existing (A)	LC3722	four.	4.5	5.	5.3	five.eight	six.two	six.six	7.
D1		ON	ON	ON	ON	ON	ON	ON	ON
D2		OFF	OFF	OFF	OFF	ON	ON	ON	ON
D3		OFF	OFF	ON	ON	OFF	OFF	ON	ON
D4		OFF	ON	OFF	ON	OFF	ON	OFF	ON

Subdivision configurations:

The push subdivisions are set by the D5-D8 terminals for a complete of 16 data files and D9 and D10 for the function options. For illustration, the quantity of subdivisions (pulse / flip)

Item size/ wiring

Application Spot:

Appropriate for all types of movement handle automation equipment and instruments, these kinds of as: electronic processing and testing, semiconductor packaging, laser reducing and welding, laser phototypesetting, packaging equipment, engraving machine, marking equipment, cutting equipment, fanuc motor and driver A06B-1445-B210#5719 garment plotter, CNC equipment resources, automation Assembly products and so on. Is the user anticipate minimal sound, substantial-velocity performance and price-powerful competitors in the area of choice.

Business InformationHangZhou XinHangZhou Electrical Co., LTD, which was started in 2009, is a high-tech company integrating item R&D, producing and product sales of industrial automation manage program. Our major items contain servo motor and drivers, stepper motor and drivers, shut loop driver, precision planetary reducer, and so on. All of our products have passed CE certification, with great good quality can competitive price tag. We are also the offical distributor of weinview HMI, 17inch 1500w2000w3000w Brushless DC Hub Motor with Sprocket for Hybrid Motorbike CZPT HMI, Fatek PLC. Welcome to be our companions.

Our factory:

Our Place of work:

Our Certification:

Our Exhibition

FAQ
one. Are you manufacturing unit?
Of course, we are facotry, and we produce stepper motor/driver, Servo motor/driver and planetary reducer for a lot more then 10 years in China. HangZhou is our registered manufacturer.
two. How to decide on models?
Before buying, please make contact with us to verify product No. and technical specs to steer clear of any misunderstanding.
3. How do you ship the merchandise?
We usually ship products by categorical(DHL/UPS/FEDEX/EMS), by sea and by air, also accept client appointed.
4. Can I examination sample?
Of course, sample charged can be presented for tests.
5. Can we be agent or distributor?
Yes, welcome and we will help you.
6. Can you do OEM or ODM services?
Sure, we have R&D office and settle for OEM and ODM service.
7. How about warranty?
One year warranty, specialized assist accessible, we constantly consider our ideal to aid consumers to resolve difficulties in time.
8. What are payment conditions?
T/T(bank transfer), CZPT Manufacture TTI provider 110V 220V 320w 500w 750w A few Stage OEM Low Rpm High Torque Electric AC Enthusiast Motors Paypal(.5% paypal fees), Western Union, ALIBABA assurance get settle for.

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

editor by czh 2023-02-20