Tag Archives: motor parts

China best High Efficient One-Piece 3 Phase Variable Frequency Permanent Magnet Synchronous Motor Spare Parts for Permanent Magnet Screw Air Compressor7.5kw,11kw,15kw,22kw wholesaler

Product Description

Genuine original air end system
·Original CHINAMFG air end
·The third generation screw rotor profile, 5:6 asymmetric rotor
·Large rotor, low rotation speed, low specific power
·Sweden CHINAMFG element bearings ensure the ultra-long service life of the air end

High efficiency permanent magnet motor
·Using high-performance permanent magnets, no loss of magnetism at 200°C
·IE3 Premium Efficiency
·IP55 degree of protection, Class F insulation, Class B temperature rise
·High transmission efficiency, service life of up to 15 years

High-efficiency air filter
·Filtration accuracy up to 99.5%
·Dust particles below 0.1 micron
·Service life up to 3000 hours

High-efficiency oil filter
·Filtration accuracy up to 99.5%
·Oil particles can be controlled at 0.1 micron
·Service life up to 3000 hours

High-efficiency oil gas tank
·Oversized oil gas tank improves the cyclone effect maximizing the separation process
·The high-efficiency oil gas separator ensures that the oil content is less than 2ppm
·System pressure drop is less than 0.2bar
·Service life of oil gas separator is up to 3000 hours

Energy-saving air inlet valve
·Large suction area
·Low load energy consumption in unloaded operation
·Cast aluminum maintenance free design
·Fast check: prevent unloading and shutdown oil injection

Classic cooler design
·Oversized cooler design
·Easy access for maintenance
·Anti-corrosion coating on surface

High-quality cooling fan
·Compact
·Low noise level
·High capacity for optimized cooling
·Low power consumption

Highly integrated microcomputer controller
·7.0 inch full color touch screen
·Full graphical flow diagram
·Multiple languages
·Real-time operation/maintenance/alarm information
·Operation record/chart display
·Weekly and daily scheduling, service history and plHangZhou
·On board RS485 interface, Modbus RTU

Model	Details	Power kw
YTPM112S36-7.5	380V 200HZ IP23 SF1.2 CHINAMFG 8P B35	7.5
YTPM132S30-11	380V 200HZ IP23 SF1.2 CHINAMFG 8P B35	11
YTPM132S30-15	380V 200HZ IP23 SF1.2 CHINAMFG 8P B35	15
YTPM160M30-22	380V 200HZ IP23 SF1.2 CHINAMFG 8P B35	22
YTPM180M30-37	380V 200HZ IP23 SF1.2 CHINAMFG 8P B35	37

Company Profile

Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.

Wallboge’ s primary businesses focus in following key areas:

Integrated screw air compressor for laser cutting
Permanent magnet variable frequency screw air compressor
Two-stage compression permanent magnet variable frequency screw air compressor
Low pressure two-stage compression permanent magnet variable frequency screw air compressor
Low pressure permanent magnet variable frequency screw air compressor
Water-lubricated oil-free screw air compressor
Fixed speed screw air compressor
Oil-free screw blower
Screw vacuum pump

At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 150 countries across the globe.

Wallboge continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CHINAMFG improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.

Certifications

Exhibitions

After Sales Service

1. 24/7 after sales service in different languages.
2. Online instruction for installation and commissioning.
3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
4. CHINAMFG agents and after sales service available.

Our Advantages

1. Proven product quality.
2. Factory direct prices.
3. On-time delivery.
4. Prompt technical support in different languages before sales, in sales and after sales.
5. Small orders accepted to check quality first.
6. OEM & ODM service available.

FAQ

Q1: Are you a factory or a trading company?
A1: We are a factory. Please check our Company Profile.

Q2: What is the exact address of your factory?
A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China

Q3: What is your delivery time?
A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.

Q4: What kind of payment terms do you accept?
A4: We accept T/T, L/C at sight.

Q5: How long is the warranty of your air compressor?
A5: 2 years for the whole air compressor except consumable spare parts.

Q6: How long could your air compressor be used?
A6: Generally, more than 10 years.

Q7: What is your MOQ requirement?
A7: 1 unit.

Q8: Can you offer OEM & ODM service?
A8: Yes, with a professional design team, we can offer OEM & ODM service.

Application:	Industrial, Screw Air Compressor
Operating Speed:	Adjust Speed
Operation Mode:	Electric Motor

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

China best High Efficient One-Piece 3 Phase Variable Frequency Permanent Magnet Synchronous Motor Spare Parts for Permanent Magnet Screw Air Compressor7.5kw,11kw,15kw,22kw wholesaler
editor by CX 2023-12-11

China 36mm/35mm Planetary Gearbox Stepper Motor Auto Parts for Industry manufacturer

Product Description

36JXES60K/35STH

Ring equipment can be chosen in the 2 materials: Powder metallic ( Type:36JXF60K ) , Steel( Sort:36JXE60K )

Planetary Gearbox

Ring substance	E : Steel/ F :Powder metallic
Bearing at out put	Ball bearings
Max. Radial load(ten mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial engage in of shaft (around to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no- load	≤1.5°

35STH Hybrid Stepping Motor Specifications

Product No	Rated Voltage	Existing /Section	Resistance /Stage	Inductance /Section	Keeping Torque	# of Qualified prospects	Rotor Inertia	Weight	L1 Duration L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g-m²	G	mm
35STH28-0504A	ten	05	twenty	fourteen	1000	4	11	140	28	≤1:264
35STH36-1004A	two.seven	ten	two.seven	four.3	1400	four	fourteen	180	36	≤1:189

A -Single Shaft, B- Double shaft
36JXES60K Planetary Gear box Requirements

Reduction ratio	three.71	5.eighteen	14	19	27	51	71	100	139
Variety of equipment trains	1		2			3
(L2) Size( L2) mm	27.		34.1			41.
kg.c m Max fee d torque	18		30			48
kg.c m Quick time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

Dimensions (mm)	Rated Voltage (VDC)	Existing / Phase (A)	Reduction Ratio	Keeping Torgue (g.cm)
22	three.9-4.32	.6-.8	one:3.seventy one-1:369	a hundred and eighty-three hundred
28	3.4-4.four	.ninety five	one:3.71-1:369	750-900
36	two.7-twelve	.31-1.33	one:3.seventy one-1:139	1000-2200
forty two	2.8-12	.4-1.sixty eight	1:3.5-1:294	1600-3600
fifty two	2.8-12	.4-1.sixty eight	one:4.5-1:162	2600-4400
fifty six	one.9-6.6	1.-2.eight	1::3.6-1:326	390-12600

Attributes:
Stepping motors come in a vast range of angular resolution.The coarsest motors usually change ninety degrees for every phase,while high resolution permant magnet motors are generally CZPT to deal with 1.8 or even .72degrees per action.With an proper controller,most everlasting magnet and hybrid motors vehicle be operate in 50 percent-steps,and some controllers can manage smaller fractional measures or microsteps.

Packaging & Shipping:
1, Waterproof plastic bag packed in foam box and carton as outer packing.
2, Export wooden box packaging for products.

WHY Choosing US:

Open for general dialogue and questions
Time to market place or theatre of operations can be substantially reduced
Talented crew of engineers delivering progressive technological solutions
A single stop “provider” and comprehensive sub-system
High quality items provided at competitive minimal expense
Potential to ship planet extensive
On time supply
Instruction at Consumer areas
Rapidly provider on return and restore final results
Numerous recurring clients

/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Customization:	Available \|

###

Ring material	E : Metal/ F :Powder metal
Bearing at out put	Ball bearings
Max. Radial load(10 mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial play of shaft (near to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no– load	≤1.5°

###

Model No	Rated Voltage	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Rotor Inertia	Weight	L1 Length L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g–m²	G	mm
35STH28-0504A	10	05	20	14	1000	4	11	140	28	≤1:264
35STH36-1004A	2.7	10	2.7	4.3	1400	4	14	180	36	≤1:189

###

Reduction ratio	3.71	5.18	14	19	27	51	71	100	139
Number of gear trains	1		2			3
(L2) Length( L2) mm	27.0		34.1			41.0
kg.c m Max rate d torque	18		30			48
kg.c m Short time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

###

Dimensions (mm)	Rated Voltage (VDC)	Current / Phase (A)	Reduction Ratio	Holding Torgue (g.cm)
22	3.9-4.32	0.6-0.8	1:3.71-1:369	180-300
28	3.4-4.4	0.95	1:3.71-1:369	750-900
36	2.7-12	0.31-1.33	1:3.71-1:139	1000-2200
42	2.8-12	0.4-1.68	1:3.5-1:294	1600-3600
52	2.8-12	0.4-1.68	1:4.5-1:162	2600-4400
56	1.9-6.6	1.0-2.8	1::3.6-1:326	390-12600

/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Customization:	Available \|

###

Ring material	E : Metal/ F :Powder metal
Bearing at out put	Ball bearings
Max. Radial load(10 mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial play of shaft (near to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no– load	≤1.5°

###

Model No	Rated Voltage	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Rotor Inertia	Weight	L1 Length L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g–m²	G	mm
35STH28-0504A	10	05	20	14	1000	4	11	140	28	≤1:264
35STH36-1004A	2.7	10	2.7	4.3	1400	4	14	180	36	≤1:189

###

Reduction ratio	3.71	5.18	14	19	27	51	71	100	139
Number of gear trains	1		2			3
(L2) Length( L2) mm	27.0		34.1			41.0
kg.c m Max rate d torque	18		30			48
kg.c m Short time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

###

Dimensions (mm)	Rated Voltage (VDC)	Current / Phase (A)	Reduction Ratio	Holding Torgue (g.cm)
22	3.9-4.32	0.6-0.8	1:3.71-1:369	180-300
28	3.4-4.4	0.95	1:3.71-1:369	750-900
36	2.7-12	0.31-1.33	1:3.71-1:139	1000-2200
42	2.8-12	0.4-1.68	1:3.5-1:294	1600-3600
52	2.8-12	0.4-1.68	1:4.5-1:162	2600-4400
56	1.9-6.6	1.0-2.8	1::3.6-1:326	390-12600

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
Motor

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
Motor

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
Motor

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China 36mm/35mm Planetary Gearbox Stepper Motor Auto Parts for Industry manufacturer
editor by czh 2023-03-24

China 36mm/35mm Planetary Gearbox Stepper Motor Auto Parts for Industry motor brushes

Product Description

36JXES60K/35STH

Ring gear can be selected within the 2 materials: Powder metal ( Type:36JXF60K ) , Metal( Type:36JXE60K )

Planetary Gearbox

Ring material	E : Metal/ F :Powder metal
Bearing at out put	Ball bearings
Max. Radial load(10 mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial play of shaft (near to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no- load	≤1.5°

35STH Hybrid Stepping Motor Specifications

Model No	Rated Voltage	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Rotor Inertia	Weight	L1 Length L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g-m²	G	mm
35STH28-0504A	10	05	20	14	1000	4	11	140	28	≤1:264
35STH36-1004A	2.7	10	2.7	4.3	1400	4	14	180	36	≤1:189

A -Single Shaft, B- Double shaft
36JXES60K Planetary Gear box Specifications

Reduction ratio	3.71	5.18	14	19	27	51	71	100	139
Number of gear trains	1		2			3
(L2) Length( L2) mm	27.0		34.1			41.0
kg.c m Max rate d torque	18		30			48
kg.c m Short time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

Dimensions (mm)	Rated Voltage (VDC)	Current / Phase (A)	Reduction Ratio	Holding Torgue (g.cm)
22	3.9-4.32	0.6-0.8	1:3.71-1:369	180-300
28	3.4-4.4	0.95	1:3.71-1:369	750-900
36	2.7-12	0.31-1.33	1:3.71-1:139	1000-2200
42	2.8-12	0.4-1.68	1:3.5-1:294	1600-3600
52	2.8-12	0.4-1.68	1:4.5-1:162	2600-4400
56	1.9-6.6	1.0-2.8	1::3.6-1:326	390-12600

Features:
Stepping motors come in a wide range of angular resolution.The coarsest motors typically turn 90 degrees per step,while high resolution permant magnet motors are commonly CZPT to handle 1.8 or even 0.72degrees per step.With an appropriate controller,most permanent magnet and hybrid motors car be run in half-steps,and some controllers can handle smaller fractional steps or microsteps.

Packaging & Shipping:
1, Waterproof plastic bag packed in foam box and carton as outer packing.
2, Export wooden box packaging for products.

WHY CHOOSING US:

Open for general discussion and questions
Time to market or theatre of operations can be substantially reduced
Talented team of engineers providing innovative technical solutions
One stop “supplier” and complete sub-system
Quality products provided at competitive low cost
Ability to ship world wide
On time delivery
Training at Customer locations
Fast service on return and repair results
Many repeated customers

US $18-27
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Customization:	Available \| Customized Request

###

Ring material	E : Metal/ F :Powder metal
Bearing at out put	Ball bearings
Max. Radial load(10 mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial play of shaft (near to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no– load	≤1.5°

###

Model No	Rated Voltage	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Rotor Inertia	Weight	L1 Length L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g–m²	G	mm
35STH28-0504A	10	05	20	14	1000	4	11	140	28	≤1:264
35STH36-1004A	2.7	10	2.7	4.3	1400	4	14	180	36	≤1:189

###

Reduction ratio	3.71	5.18	14	19	27	51	71	100	139
Number of gear trains	1		2			3
(L2) Length( L2) mm	27.0		34.1			41.0
kg.c m Max rate d torque	18		30			48
kg.c m Short time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

###

Dimensions (mm)	Rated Voltage (VDC)	Current / Phase (A)	Reduction Ratio	Holding Torgue (g.cm)
22	3.9-4.32	0.6-0.8	1:3.71-1:369	180-300
28	3.4-4.4	0.95	1:3.71-1:369	750-900
36	2.7-12	0.31-1.33	1:3.71-1:139	1000-2200
42	2.8-12	0.4-1.68	1:3.5-1:294	1600-3600
52	2.8-12	0.4-1.68	1:4.5-1:162	2600-4400
56	1.9-6.6	1.0-2.8	1::3.6-1:326	390-12600

US $18-27
/ Piece
| 1 Piece

(Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated\| Freight Cost Calculator

###

Application:	Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed:	Constant Speed
Excitation Mode:	Excited

###

Customization:	Available \| Customized Request

###

Ring material	E : Metal/ F :Powder metal
Bearing at out put	Ball bearings
Max. Radial load(10 mm from flange)	≤50 N
Max. shaft axial load	≤30 N
Radial play of shaft (near to flange)	≤0.07 mm
Axial play of shaft	≤0.3 m m
Backlash at no– load	≤1.5°

###

Model No	Rated Voltage	Current /Phase	Resistance /Phase	Inductance /Phase	Holding Torque	# of Leads	Rotor Inertia	Weight	L1 Length L1	Max Gear Ratio
Single Shaft	V	A	Ω	mH	g.cm		g–m²	G	mm
35STH28-0504A	10	05	20	14	1000	4	11	140	28	≤1:264
35STH36-1004A	2.7	10	2.7	4.3	1400	4	14	180	36	≤1:189

###

Reduction ratio	3.71	5.18	14	19	27	51	71	100	139
Number of gear trains	1		2			3
(L2) Length( L2) mm	27.0		34.1			41.0
kg.c m Max rate d torque	18		30			48
kg.c m Short time permissible torque	54		90			144
Efficiency %	90%		81%			73%
Weight g	195		210			290

###

Dimensions (mm)	Rated Voltage (VDC)	Current / Phase (A)	Reduction Ratio	Holding Torgue (g.cm)
22	3.9-4.32	0.6-0.8	1:3.71-1:369	180-300
28	3.4-4.4	0.95	1:3.71-1:369	750-900
36	2.7-12	0.31-1.33	1:3.71-1:139	1000-2200
42	2.8-12	0.4-1.68	1:3.5-1:294	1600-3600
52	2.8-12	0.4-1.68	1:4.5-1:162	2600-4400
56	1.9-6.6	1.0-2.8	1::3.6-1:326	390-12600

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China 36mm/35mm Planetary Gearbox Stepper Motor Auto Parts for Industry motor brushes
editor by czh

China Direct Factory Good Price Blender Juicer 176 Spare Parts AC Motor Engine 8820 8825 8830 Hot In Pakistan with Best Sales

Warranty: 1 year
Model Number: HTHC8820A
Type: Universal Motor
Frequency: 50/60HZ, 50/60HZ
Phase: Single-phase
Protect Feature: Drip-proof, Drip-proof
AC Voltage: 220V / 110V
Efficiency: can be adjusted
No-load power: 170-185±10%W; can be adjusted
Speed: 16000-17000±10%RPM; can be adjusted
Material: Pure copper or CCA or Aluminum wire
Insulation Level: Class B
Voltage: 220V / 110V
Rotation: CW, CCW, can be adjusted
Certification: CCC, RoHS
Application: Blender, Juicer
Packaging Details: Motors can be packed with plastic bag PhaseSingle-PhaseVoltage (V)220V / 110VFrequency (Hz)50/60HZSpeed (rpm)16000-17000±10%RPM; can be adjustedNo-load power170-185±10%W; can be adjustedRotor materialFull copper or CCA or AluminumProduct nameUniversal motorsRotationCW, CCWHi-Pot TestYESApplications176 Juicer, Blender Product Feature Company Profile HangZhou Hon-Tech Motor & Electric Appliances Co., Ltd. is a professional manufacturer of various small motors in China, with more than 4,000 m² ISO 9001:2015 Standard workshop, 100+ skilled workers and a wealth of OEM&ODM experience.Since 2003, Hon-Tech Motor has developed a line of professional motors include AC motors, DC motors, universal motors, and more. Our motors are designed for home appliances and strict compliance with the highest industry standards, including CCC, etc. At Hon-Tech Motor, we offer high quality products at competitive costs and employ flexible manufacturing techniques that enable us to respond to large and small-scale requirements.Contact Hon-Tech Motor to skyrocket your business! Production Line & Equipment Processing Certifications Packaging FAQ Q1: Are you a trading company or manufacturer?A1: We are a manufacturer with more than 4,000m2 workshop located in HangZhou, 1 of the cities included in the Greater Bay Area, along with Hong Kong and Macau. Q2: How do you ensure your product quality?A2: At Hon-tech Motor, we manufacture more than 1 million motors each year. We demand Total Quality. Our checks include: statistical process control (SPC) in our fabrication departments, process control audits throughout production stages, and 100 percent motor testing. We don’t just sample each batch of motors; we test every 1 of your motors before shipping. Q3: What’s the warranty?A3: Our motors are warranted for 12 months from the date of purchase against manufacturing defects of material quality. If a product is deemed defective, Hon-tech Motor will repair or replace the item at no cost to you.Q4: What is your MOQ?A4: Normally our MOQ is 1000pcs. We employ flexible manufacturing techniques that enable us to respond to large and small-scale requirements. Please feel free to contact Hon-tech for more information. Q5: Do you provide samples? Is it free or extra?A5: FREE sample is available with freight collect or prepaid. Q6: Do you provide OEM design?A6: Yes, we can accept OEM orders. Hon-Tech mainly focuses on common types of Motors, and it is also possible to have your motors customized with our strong R&D abilities and core technologies. Please share your detailed requirements and designs, we will keep strictly confidential. Q7: What’s your delivery time?A7: 5-10 days for sample, 20-35 days for normal order after payment confirmed. Q8: What are your payment terms?A8: Purchase order value less than US$1000 – 100% T/T in advance. Purchase Orders greater than US$1000 – 30% or 50% T/T in advance, balance before delivery.Q9: What types of packaging method do you offer?A9: 20 pieces in a foam box, certain quantity in a export standard carton.

Benefits of a Planetary Motor

Self-centering planet gears ensure a symmetrical force distribution

Metal gears

Encoder

Durability

Cost

China Direct Factory Good Price Blender Juicer 176 Spare Parts AC Motor Engine 8820 8825 8830 Hot In Pakistan with Best Sales
editor by czh

China Professional YouQi DC 12V-24V 12000 RPM Large Torque Motor Ball Bearing Tools 775 High Power DC Motor for DIY Driver Parts with Best Sales

Warranty: 3 months
Model Number: 775
Usage: CNC
Speed(RPM): 12000 RPM
Continuous Current(A): 3.25A
Efficiency: –
Rated voltage: 12V
No-load current: 1.2A
Stall current: 3.25A
No-load speed: 12000 rpm
Motor step height: 4.5mm
Motor step diameter: 17.5mm
MOQ: 10pcs
Stock: Yes
Packing: Box
Payment: Trade Assurance
Packaging Details: Vacuum package
Port: HangZhou

YouQi DC 12V-24V 12000 RPM Large Torque Motor Ball Bearing Tools 775 High Power DC Motor for DIY Driver Parts * The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life * This DC motor has the characteristic of high speed, and small size * Select high-quality raw materials, good gloss, simple and generous * This motor is adopted of pure copper wire coil, with low heat and low loss * Suitable for electric tools, electric screwdriver, electric fan toys, juice machine, paper shredder, vacuum cleaner ColorSilver Details Images Related products About YouQi YouQi is the manufacturer of 3D Printers Accessories & CNC Accessories &3D Printing Filament.Both OEM and ODM are available.Our service tenet is: 1. Efficient communication, no matter pre-sales or after-sales, we can reply to customers’ information in a timely manner. Understand and solve customer problems in a timely manner. 2. High quality, we believe that high-quality quality is the basic condition for long-term cooperation. 3. Reasonable price, reasonable price allows customers to remain competitive in their market.Welcome to send us an inquiry, and we will reply to your information in time.4.Delivery on time, abide by the promise, all orders will be delivered in time in accordance with the contract delivery date. Now send inquiry

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China Professional YouQi DC 12V-24V 12000 RPM Large Torque Motor Ball Bearing Tools 775 High Power DC Motor for DIY Driver Parts with Best Sales

China best Sunchonglic 55W 20 inches 220v ac factory price electronic fan parts copper wire fan motor table fan motor. wholesaler

Warranty: no
Model Number: B06571148
Type: Induction Motor
Frequency: 50Hz, 50HZ
Phase: Single-phase
Protect Feature: Explosion-proof
AC Voltage: 208-230 / 240 V, 208-230 / 240 V
Efficiency: IE 1
Product name: 20 inches 220v ac table fan motor
Material: Copper Coil Wire
Number of lines: 2 lines & 1 gear positions
Rotating speed: 1200r/min
Fan capacitor: 1.5uf/400v
Certification: ce
Packaging Details: Standard Export Carton

Posters

Sunchonglic factory price fan parts copper coil fan motor 20 inches 220v ac table fan motor
Product Features1. Electric Fan motor type: Table fan motor. 20 inches 55w table fan parts 220v ac table fan motor2. The working voltage is 220v 50Hz,the maximum power is 55w3. The rotating speed(RPM) is 1200r/min4. The coil material is pure copper wire5. Fine Process Technique6. Low noise,long work time7. With competitive price8. AC electric table fan motor
Product specificationBrandSunchonglicAdditional PartsFan Capacitor(1.5uf/400v)Rated voltage220V 50HzPower55WMaterialPure copper wireApplicationTable fanRotating speed1200r/minProduct Display

6More products
Certificate

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China best Sunchonglic 55W 20 inches 220v ac factory price electronic fan parts copper wire fan motor table fan motor. wholesaler

China made in China – replacement parts – New Holland 847 Round Baler Chain – Floor Chain in Zaria Nigeria Products Supplier High Standard Own Factory Tapered Taper Metric Motor Roller Bearing Auto Parts with ce certificate top quality low price

China made in China - replacement parts - New Holland 847 Round Baler Chain - Floor Chain in Zaria Nigeria Products Supplier High Standard Own Factory Tapered Taper Metric Motor Roller Bearing Auto Parts with ce certificate top quality low price

We – EPG Team the most significant Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

We will offer best solutions and substantial quality merchandise with all sincerity. a specialised provider of a complete assortment of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….Competence Provider & High quality controlWe supply detailed drawings and supply every time essential.for industrial chains and sprockets It is our everyday obstacle to offer our buyers with the optimum solution – that indicates optimal for the essential software and for the customers’ certain demands. In some cases it signifies that we really develop and manufacture extremely specific chain kinds for a single particular client. In get to be capable to do so, a few things are essential: Company & distributor of roller & wire rope end chains. Types of chains contain alloy, high tensile transport, higher examination & proof coil chains. Purposes consist of log chains, cargo lashings, pipe line handing, tailgates, guard rails & change chains.

Our company manufacturing wholesale high – quality
Taper Roller Bearing

Taper roller bearings are separable bearings with tapered raceway in equally interior and outer rings. The bearings are divided into one row, double row and 4 row tapered roller bearings according to the variety of rollers loaded. Solitary row tapered roller bearing can bear radial load and single path axial load. When the bearing bears the radial load, there will be an axial ingredient, so an EPT bearing that can bear the opposite axial drive is necessary for stability.

Solution Identify	Taper Roller Bearing
Materials	Roller bearing steels
Color	EPT steel color
StHangZhourd	DIN GB ISO JIS
Brand	SKF NSK NTN Timken
Used	Universal industry equipment,reducer,bike bearing

Functions and benefits:
    1. Lower friction
    2.Long support life
    3. Enhanced operational reliability
    4.Rigid bearing software

1.Our company was launched in 2006, 14 years of prosperous expertise makes us more professional.We assure to give you with the mo EPT aggressive cost and the be EPT merchandise.

2. The organization has a number of higher-high quality layout, processing, producing and tests technological innovation engineering complex staff, superior equipment, superior engineering, and imported parts, from ZheJiang , Germany imports, can produce substantial-good quality equipment tools.The company has a professional r & d team and following-income support crew, you purchase high-conclude products, we do is quality provider.

3. The company has an computerized production line, which ensures unified merchandise quality, lowers value, shortens supply time and enhances manufacturing performance.

4. The bearings created by the firm have high precision, higher pace, small put on, service lifestyle, stHangZhourd measurement, compact structure and fa EPT running pace.The organization has been awarded”China 3.15 integrity enterprises”, “China famous brand products”, “good quality inspection nationwide stHangZhourds qualified merchandise” and EPT nationwide authoritative certificates.Obtained a number of countrywide patents, turn out to be the domestic foremost enterprises.

EPT design	innter diameter	outside the house diameter	substantial	Cr	Cor	bodyweight
382571	140	210	185	–	–	24.one
382034/C2	a hundred and seventy	260	230	–	–	39.five
382044	220	340	305	–	–	ninety seven.9
382048	240	360	310	3300	2210	110
382052	260	400	345	–	–	153
382060	three hundred	460	210	–	–	117
382064	320	480	380	–	–	234
382930	a hundred and fifty	210	one hundred sixty five	–	–	5698
382952	260	360	265	–	–	seventy six.three
382968	340	460	310	–	–	145

Our Rewards
    one. Planet-Class Bearing
       We supply our customers with all sorts of indigenous bearing with globe-course top quality.
   2. Authentic merchandise With EPT Good quality
       The company has always proved the 100% good quality goods it provides with authentic intent.
   3. Following Sales Provider and Complex Assistance
       The firm offers after-sales provider and technological help as per the customer’s specifications and requirements
   4. Fast Shipping
       The firm provides just-in-time shipping and delivery with its streamlined source chain.

Question and reply
one. Are you a factory or a trading firm?
    ZheJiang XuanYe Precision EPT Co.,Ltd. is a professional manufacture of Tapered Roller Bearing and EPT bearings.
two. Is the sample accessible?
     Yes, samples are available for you to te EPT the good quality.
3. Have the items been examined ahead of delivery?
    Yes, all of our bearings have been analyzed prior to shipping and delivery.
4. How long is your delivery time?
    As pointed out over, there are distinct types of shipping for your get. We make certain to provide products after all goods are made and examined.
5. What is your conditions of payment ?
    You can pay out by T/T, L/C, Westunion, Paypal,and so on., and it can be negotiated in accordance to diverse orders with diverse sum.
6.How to inventory and maintenance my bearings?
   Do not store bearings immediately on concrete flooring, where h2o can condense and gather on the bearingStore the bearings on a pallet or shelf, in an region exactly where the bearings will not be subjected to higher humidityor severe temperature that may end result in condensation forming.

If you have any questions make sure you really feel free to make contact with us, we will give you with warm support!

The use of unique tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the shown substitution areas contained herein are not sponsored, approved, or manufactured by the OEM.