TYM series low-speed and high-torque everlasting magnet direct-drive synchronous motor is a new kind of long term magnet direct-push synchronous motor created by our firm for the marketplace need of reduced-velocity and heavy-obligation products. The rotor uses long lasting magnet excitation to recognize power transmission of low-pace and higher-torque. The motor is controlled by frequency converter. In the software of mill, the reducer is eliminated. Direct generate little gear. It has the advantages of compact structure, large commencing torque, high effectiveness, stable operation, high trustworthiness, reduced sounds and convenient set up, and fundamentally realizes upkeep-totally free. The change of transmission mode, the elimination of reducer, simplifies the transmission chain of mill, reduces the maintenance expense of reducer, eliminates the intermediate hyperlink, and increases the overall transmission of mill. Performance.
This series of long lasting magnet motors are magnetized by long term magnet materials. In contrast with conventional recent-fired up motors, the electricity factor is drastically elevated, the stator current and stator resistance losses are diminished, and the rotor copper loss is not discovered in stable procedure. High performance and electrical power aspect can be managed in the rated load selection of 25%-one hundred twenty%. The strength saving result of gentle load procedure is much more significant. In comparison with the characteristics of performance, electrical power issue and load ratio of long lasting magnet motor and asynchronous motor, they have apparent rewards.
TPYM sequence minimal-pace, higher-torque long term magnet immediate travel frequency conversion motors are utilized in all electricity transmission gear which need to supply low-velocity, higher-torque and high-electricity in the industrial subject, particularly in the grinding equipment tools of our region. Dependent on the exclusive electromagnetic traits and vector handle strategy of long term magnet motor, the characteristics of electricity offer and the program price ratio, a established of push and manage technique remedies are developed to improve the motor layout, decrease the substance price and minimize the electricity reduction. Generate outstanding financial benefits. Remove the mechanical deceleration unit, significantly lessen the servicing workload of products, at the very same time boost the reliability and sustainability of motor procedure from the design, lessen the routine maintenance price right after putting into procedure.
|Solution Title||TPYM collection low velocity and substantial torque long term magnet immediate push variable frequency motor|
|Motor Variety||DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
||one, straightforward structure, modest quantity, light bodyweight, stable and dependable procedure.
2. The high electricity factor and high effectiveness of the motor need to be maintained in the rated range of 20%-one hundred twenty%. No electrical power compensator is required.
three. Frequency conversion control can understand delicate begin, soft stop, stepless pace regulation, no influence, and additional increase the power-conserving impact.
four. There are many topological constructions of motors, which meet the fundamental demands of mechanical gear in a vast assortment and excessive conditions.
|Running speed||Constant Velocity /Minimal Velocity /Change Speed /Substantial Speed Other|
|Primary classification||DC Motor is a device that converts mechanical vitality into DC electricity. It is mainly utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power offer of alternator. Even though in locations where DC electrical power is essential, AC energy rectifier is also employed to change AC into DC electricity, but from some elements of efficiency, AC rectifier power source can not fully substitute DC generator.|
|Application||DC motors are widely utilised in tape recorders, movie recorders, movie discs, electric powered shavers, hair dryers, electronic watches, toys and so on.|
|Servicing strategy||Expert motor upkeep center motor servicing approach: cleaning stator and rotor – replacing carbon brush or other areas – vacuum F pressure dipping paint – drying – Calibration stability.
1. Use environment ought to be usually dry, motor area must be retained thoroughly clean, air ingestion should not be hindered by dust, fibers and other road blocks.
2. When the thermal protection of the motor continues to work, it ought to be ascertained whether the fault will come from the motor or the overload or the environment benefit of the protective system is also lower. Right after removing the fault, it can be place into procedure.
three, make certain that the motor is nicely lubricated for the duration of operation. The common motor runs for about 5000 hrs, that is to say, lubricating grease should be extra or replaced. When bearing overheating or lubricating deterioration is located in operation, the hydraulic strain must modify lubricating grease in time. When changing grease, the outdated grease ought to be taken out, and the oil groove of bearing and bearing cover should be washed with gasoline. Then ZL-three lithium grease ought to be crammed with one/two (2 poles) and two/3 (four poles, six poles and 8 poles) of the cavity in between the interior and outer rings of the bearing.
4. When the lifestyle of the bearing is above, the vibration and noise of the motor will improve obviously. When the radial clearance of the bearing reaches the following benefit, the bearing should be replaced.
five, when removing the motor, it is Okay to eliminate the rotor from the shaft extension or the non extension end. If it is not required to unload the enthusiast, it is a lot more practical to get out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from getting broken.
6. When changing the windings, the form, dimension, turns and gauges of the unique windings need to be recorded. When these info are lost, they must be received from the manufacturer and the original made windings should be modified at will, which often deteriorates 1 or many functionality of the motor or even can make it not possible to use them.