Tag Archives: machine

China OEM Ityindustrial AC Permanent Magnet Synchronous Servo Motor for Injection Machine vacuum pump booster

Product Description

Quiet stable and reliable for long life operation

1.Diameters: 57mm
2.Lengths: 56mm;76mm;96mm
3.Continuous torques: 0.11Nm;0.22Nm;0.32Nm
4.Power: 46W;92W;134W
5.Speeds up to 4000rpm;4000rpm;4000rpm
6.Environmental conditions: -10~+40°C
7.Number of poles/phase:4/3
8.Mangnet material:Bonded NdFeB
9.Insulation class:B
10.Optional: electronic drivers, encoders and gearheads, as well as Hall effect resolver and sensorless feedback
11.We can design the special voltage and shaft and so on

Jintian Imp. & Exp Co. Ltd opened in 2008 to facilitate international trade between China and the rest of the world. The young firm grew quickly, gaining a reputation for integrity, efficiency and astute knowledge of local market.

Throughout its 10 more years history, CHINAMFG has sought to connect customers with opportunities. While that purpose has remained unchanged, CHINAMFG has succeeded by positioning itself where the growth is and by aligning itself to the major economic trends of the time.

After being funded in ZheJiang , China to facilitate local and international trade, CHINAMFG expanded rapidly to capture the increasing flow of commerce between Asia, Europe and North America. Since then, CHINAMFG has continued to grow in line with changing trade patterns and developing markets, pioneering modern international trade practices in many countries. Built over 10 years, this global network is highly distinctive, difficult to replicate and ideally positioned for the world’s top trade corridors.

Our ability to connect customers remains absolutely central to the company’s strategy today, which aims to establish CHINAMFG as the world”s leading international trade company. Above all, we remain dedicated to the purpose that CHINAMFG was founded to serve: Connecting customers to opportunities, enabling businesses to CHINAMFG and economies to prosper, and helping people to fulfill their hopes and dreams.

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 8
Samples:
US$ 162/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China OEM Ityindustrial AC Permanent Magnet Synchronous Servo Motor for Injection Machine   vacuum pump booster	China OEM Ityindustrial AC Permanent Magnet Synchronous Servo Motor for Injection Machine   vacuum pump booster
editor by CX 2023-12-15

China factory Permanent Magnet Synchronous Elevator Door Machine Motor Mj100A Mj100b for Elevator vacuum pump for ac

Product Description

 

 

 Elevator door motor

MJ100A MJ100B  

Elevator Spare parts 

 

 

 

     Chunfeng company located in City of HangZhou(China), has in present day a world-wide distribution offering its high quality products with competitive prices, and a special customer service to countries all around the world. 
     The concept of our work indicate to efficiency, economy & safety, we will be your ultimate partner in elevator industry, let’s win the future together!

Q1. What is your terms of packing?
Re: Generally, we packed our goods by Carton box and Wooden box, it based on the products quantity and product properties. 
Q2. What is your terms of delivery?
Re: EXW, FOB, CFR, CIF.
Q3. How about your delivery time?
Re: Generally, it will take 2~5 days before shipping products, and we will ship products to you by DHL, FEDEX, or ship by sea.
 

After-sales Service: Technical Support
Warranty: 12 Months
Type: Control System
Suitable for: Elevator
Load Capacity: 1000kg
Persons: 6-10

China factory Permanent Magnet Synchronous Elevator Door Machine Motor Mj100A Mj100b for Elevator   vacuum pump for ac	China factory Permanent Magnet Synchronous Elevator Door Machine Motor Mj100A Mj100b for Elevator   vacuum pump for ac
editor by CX 2023-11-30

China best Greenhouse Motor Electric 40kw Dental LED Micro Agricultue Industry Machine 48V 1200W Asynchronous Transmission Three-Phase Drip-Proof Greenhouse Motor motor efficiency

Product Description

Greenhouse motor Electric 40kw Dental LED Micro Agricultue Industry Machine 48V 1200W Asynchronous transmission Three-Phase Drip-Proof Greenhouse motor

Ever-Power electirc motor factory is 1 of the biggest reducer and geared motor manufacturer in China,

main products range:

Worm geared motors

Helical geared motors

Planetary geared motors

cyclo gear motor

servo gear motor

+  Y2 series motors
+  Y series motors
+  YD series multi-speed motors
+  YS series motors
+  YC YL series motors
+  Y3 series motors
+  YEJ motors
+  Mortor components 
+  TYGZ synchronous motors
+  TYBZ synchronous motors
+  Servo motors
+  Brushles dc motors
+  Electirc Motor
+  Rare-Earth-Permanent-Magnet motors(REPM MOTORS)

 Due to limitation of website, please kindly contact us for free catalog in case of need, do not hesitate to

inquire us with item + QTY. You will win in your market with our high quality and lower cost products…

 

 

Application: Industrial, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode:
Function: Driving
Casing Protection:
Number of Poles:
Samples:
US$ 999/Piece
1 Piece(Min.Order)

|
Request Sample

Motor

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China best Greenhouse Motor Electric 40kw Dental LED Micro Agricultue Industry Machine 48V 1200W Asynchronous Transmission Three-Phase Drip-Proof Greenhouse Motor   motor efficiencyChina best Greenhouse Motor Electric 40kw Dental LED Micro Agricultue Industry Machine 48V 1200W Asynchronous Transmission Three-Phase Drip-Proof Greenhouse Motor   motor efficiency
editor by CX 2023-11-22

China Professional Ka180-M48015 AC Synchronous Servo Three Phase Electric Motor for Machine Tools vacuum pump distributors

Product Description

Product Description

  • Motor Features
  • Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)  
  • Equipped with high resolution encoder (23-bit absolute encoder)
  • Maximum torque 3 M23015 M28415 M35015 M48015 Rated power (kW) 2.9 3.6 4.4 5.5 7.5 Rated torque (N.m) 18.6 23 28.4 35 48 Maximum instantaneous torque (N.m) 55.8 69 85.2 105 144 Rated speed (rpm) 1500 1500 1500 1500 1500 Maximum speed (rpm) 3000 3000 3000 3000 3000 Rated current (A) 17 24 28 38 45 Maximum instantaneous current (A) 51 72 84 114 135 Rotor inertia (kg*cm^2) 51.89 64.51 73.78 104.94 144.59 Weight(Kg)(Without brake) 15.3 17.5 19.2 25.5 32.5 Pole pairs 5 Adapted driver work voltage (VAC) 220 Insulation class F Protection level IP67 Installation type Flange mounting Environment Temperature -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing) Humidity 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation) Air Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust Vibration Vibration speed below 0.5mm/s LL Without brake 191 206 216 251 296 With brake 226 241 251 286 331 L1 79 79 79 113 113 L2 63 63 63 90 90 D 35 35 35 42 42 W 10 10 10 12 12 T 8 8 8 8 8 G 30 30 30 37 37

    *Note: We can manufacture products according to customer’s requirements.

    Motor characteristic curve
    A:Continuous work area;B:Short-term work area

    Company Profile

    ZheJiang KND Automation Technology CO.,Ltd

    ABOUT US
     

    ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
    KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
     

    PRODUCT DISTRIBUTION

         CNC system                              Robot controller                        Universal automation controller

       Servo drives                          Servo motors                              KWS Industrial Interconnection

    MOTOR OVERVIEW
     

    K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.

    ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.

    ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.

    FAQ

    Payments

    1) We can accept EXW, FOB
    2) Payment must be made before shipment.
    3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

    Shipping
    1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
    2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
    3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
    3) Please  check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
    Feedback & Refund
      1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
      2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
      3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.

     If you need more information, please contact with us. We will attach great importance to your any problems.
    Hope we could establish a long-term effective cooperation.

    Application: Universal, Industrial
    Operating Speed: Constant Speed
    Operation Mode: Electric Motor
    Magnetic Structure: Permanent Magnet
    Function: Driving
    Structure: Rotating Pole Type (Armature Fixed)

China Professional Ka180-M48015 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   vacuum pump distributorsChina Professional Ka180-M48015 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   vacuum pump distributors
editor by CX 2023-11-17

China supplier Ka90-M03330 AC Synchronous Servo Three Phase Electric Motor for Machine Tools with high quality

Product Description

 

Product Description

 

  • Motor Features
  • Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)  
  • Equipped with high resolution encoder (23-bit absolute encoder)
  • Maximum torque 300%, stronger overload capacity
  • The protection level is increased to IP67
  • The vibration level is raised to A level
  • Motor heating is reduced by 20%
  • 380V motor, rated speed improved

 

Model Explanation

Wiring

23/25-bit Absolute Encoder Socket
9-core: applicable for KA60/KA80 /KA90 series

Signal 5V 0V SD+ SD- E+ E- FG
Core No. 8 6 5 4 3 2 1

Parameters of Motor Equipped with Power-off Brake

Frame NO. Rated torque Rated voltage Rated current Rated power Increased weight
60 Series 3.3 Nm DC24V 0.48A±10% 11.5W 0.8Kg

 

Detailed Photos

Model KA90
M03330
Rated power (kW) 1
Rated torque (N.m) 3.3
Maximum instantaneous torque (N.m) 9.9
Rated speed (rpm) 3000
Maximum speed (rpm) 5000
Rated current (A) 5.2
Maximum instantaneous current (A) 15.6
Rotor inertia (kg*cm^2) 4.78
Weight(Kg)(Without brake) 4.2
Pole pairs 5
Adapted driver work voltage (VAC) 220
Insulation class F
Protection level IP67
Installation type Flange mounting
Environment Temperature -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing)
Humidity 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation)
Air Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust
Vibration Vibration speed below 0.5mm/s
LL Without brake 140
With brake 180

*Note: We can manufacture products according to customer’s requirements.
Motor characteristic curve
A:Continuous work area;B:Short-term work area

Company Profile

 

ZheJiang KND Automation Technology CO.,Ltd

ABOUT US
 

ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
 

PRODUCT DISTRIBUTION

  CNC system                                       Robot controller                      Universal automation controller

  Servo drives                                     Servo motors                          KWS Industrial Interconnection

MOTOR OVERVIEW
 

K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.

ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.

ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.

FAQ

Payments

1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please  check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
  1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
  2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
  3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.

 If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.

Application: Universal, Industrial
Operating Speed: Constant Speed
Operation Mode: Electric Motor
Magnetic Structure: Permanent Magnet
Function: Driving
Structure: Rotating Pole Type (Armature Fixed)

China supplier Ka90-M03330 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   with high quality China supplier Ka90-M03330 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   with high quality
editor by CX 2023-11-16

China Good quality Helical Gear Low Backlash Transmission Planetary Gearbox for CNC Machine with Best Sales

Product Description

PXR120 series helical gear low backlash transmission planetary gearbox for CNC machine

Planetary gearbox is a kind of reducer with wide versatility. The inner gear adopts low carbon alloy steel carburizing quenching and grinding or nitriding process. Planetary gearbox has the characteristics of small structure size, large output torque, high speed ratio, high efficiency, safe and reliable performance, etc. The inner gear of the planetary gearbox can be divided into spur gear and helical gear. Customers can choose the right precision reducer according to the needs of the application.

Product Parameters

Characteristics:

1.Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
2.High Precision:Backlash is 3 arcmin or less,accurate positioning.
3.High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
4.High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
5.Maintenance-Free:Low grease wear,can be lifetime lubrication.
6.Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
7.Installation Unrestrained:Can be installed arbitrarily.
8.Wide Applicability:Applicable to any type of servo motor.
9.An organic [integral] whole output axis.
10.Speed ratio range:3-100.
11.Precision range:3-5arcmin(P1 level);5-8arcmin(P2 level).
12.Size range:60-140mm.

Parameters:

Type PXR120 series Planetane Reducer
Ratio 7:1
Maximum torque(Nm) 1.5 times rated torque
Emergency stop torque(Nm) 2.5 times rated torque
Allowable radial force(N) 6850
Allowable axial force(N) 3100
Torsional rigidity (Nm/arc-min) 23
Max. input speed(rpm) 6000
Rated input speed(rpm) 3000
Noise(dB) ≤66
Average life(h) 20000
Efficiency(%) ≥95%
Backlash 3-5arcmin(P1);5-8arcmin(P2)
Moment of intertia(kg.cm2) 6.87
Rated torque(Nm) 220
Degree of protection IP65
Operation temperature(ºC) 90ºC to -10ºC
Weight(kg) 13.7
Material Alloy steel, aluminum alloy

Company Profile

Newgear(China) receive German precision planetary gear design and manufacturing technology,Production of high rigidity, small backlash, low noise, stable transmission, reliable and durable planetary reducer,widely used in various fields.
Newgear(China) has a complete planetary gear reducer manufacturing chain .

Packaging & Shipping

Application: Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Automation Equipment
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Bevel Gear
Step: Single-Step
Samples:
US$ 640/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Good quality Helical Gear Low Backlash Transmission Planetary Gearbox for CNC Machine   with Best SalesChina Good quality Helical Gear Low Backlash Transmission Planetary Gearbox for CNC Machine   with Best Sales
editor by CX 2023-11-15

China supplier 230V DC Motor of Ice Cream Machine DC Brushled Mmotor Permanent Magnet Synchronous Motor vacuum pump connector

Product Description

Product Description

Motor Powers Life ! 

Power Motor has been committed to Development and Production of micro-motors for different applications segments since 2001.  
 

HangZhou Power Motor Industrial Co., Ltd.(Power Motor) has been a reliable motion solution provider & manufacturer since 2001. Our technology leadership, application expertise and wide range platform make us to be the ideal partner for customized product development. Power Motor is committed to making our customers successful with our product differentiation and excellent supply chain. For designers who demand performance leadership and assurance of supply, Power Motor is the reliable choice.

Product lines 

Our wide range product lines including Universal, Brushless DC, PMDC and Gear Motor that will serve many industries including Small Appliances, Home Technologies, Medical Devices, Industrial & Office Automation, Power Tools and Automotive.

Range of Engineering Ability

From our powerful DC brushed and brushless motor to the AC universal motor, Power Motor standard range can be combined into more than a million different ways to build the motor for a particular application. At the same time, this can form a basic “construction kit” for combination and modification which allow us to configure special gearbox to meet the specific needs of customer. Moreover, our fully experienced engineer and extensive application expertise make us as a valued partner for the project development and production with customer-specific motion solutions.

The classic ice-cream machine 230V DC motor can provide the best driving force for various ice-cream machine and ice-cream machine automation, with large torque and stable output, low noise, long service life, and wide customization range. Power Motor Electric has a mature automatic motor customization platform, which can provide a variety of ice cream machine motor prototypes as a reference, with short customization cycle and low cost.

  • Model:PT-4030 series / Voltage:230V
  • Torque:500mN.m
  • Power:180W
  • Speed:5200rpm
  •  
  •  

Application: Universal, Household Appliances
Function: Driving
Number of Poles: 2
Structure and Working Principle: Brush
Certification: ISO9001
Brand: Power
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

China supplier 230V DC Motor of Ice Cream Machine DC Brushled Mmotor Permanent Magnet Synchronous Motor   vacuum pump connector	China supplier 230V DC Motor of Ice Cream Machine DC Brushled Mmotor Permanent Magnet Synchronous Motor   vacuum pump connector
editor by CX 2023-10-23

China Standard Kc130-M15020 (Z) AC Synchronous Servo Three Phase Electric Motor for Machine Tools with Great quality

Product Description

 

Product Description

  • Motor Features
  • Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)  
  • Equipped with high resolution encoder (23-bit absolute encoder)
  • Maximum torque 300%, stronger overload capacity
  • The protection level is increased to IP67
  • The vibration level is raised to A level
  • Motor heating is reduced by 20%
  • 380V motor, rated speed improved

Model Explanation

Wiring

Power Socket
4-core: Sockets of KA110/ KA130/KD130 series are universal

Winding U V W PE
Core No. 2 3 4 1

4-core: applicable for 110/130 throwing line series

Winding U V W PE
Core No. 2 3 4 1

23/25-bit Absolute Encoder Socket
7-core: applicable for KA110/KA130/KD130/KA180/KD180 serie

Signal 5V SD+ 0V SD- E+ E- FG
Core No. 7 6 5 4 3 2 1

7-core:applicable for 110/130 throwing line series

Signal 5V SD+ 0V SD- E+ E- FG
Core No. 7 6 5 4 3 2 1

17-bit Absolute Encoder Socket
10-core:applicable for KA110/KA130 serie

Signal 5V 485+ GND 485- Battery
+
Battery
GND
FG
Core No. 7 6 5 4 3 2 10

Resolver Socket
7-core:applicable for KD130 series

Signal SIN- SIN+ COS- COS+ EXC- EXC+ FG
Core No. 7 6 5 4 3 2 1

Power off Brake Socket
2-core: socket of 110/130/180 series are universa

Signal DC24V(Non-polar)
Core No. 1 2

2-core: applicable for 110/130 throwing line series

Signal DC24V(Non-polar)
Core No. 1 2

Parameters of Motor Equipped with Power-off Brake

Frame NO. Rated torque Rated voltage Rated current Rated power Increased weight
130 Series 12 Nm DC24V 0.69A±10% 16.5W 1.06Kg

 

Specification & Dimension

Model KC130 KC130 KC130 KC130
  M06571Z M08420Z M11520Z M15571Z
Rated power (kW) 1.2 1.7 2.4 3.1
Rated torque (N.m) 6 8.4 11.5 15
Maximum instantaneous torque (N.m) 18 25.2 34.5 45
Rated speed (rpm) 2000 2000 2000 2000
Maximum speed (rpm) 4000 4000 4000 4000
Rated current (A) 4.5 6.0 7.0 9.0
Maximum instantaneous current (A) 13.5 18.0 21.0 27.0
Rotor inertia (kg*cm^2) 14.88 21.45 31.55 41.45
Weight(Kg) 7.6 9.2 11.1 13.3
Pole pairs 5
Adapted driver work voltage (VAC) 380
Insulation class F
Protection level IP67
Installation type Flange mounting
Environment Temperature -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing)
  Humidity 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation)
  Air Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust
  Vibration Vibration speed below 0.5mm/s
LL With brake 160 177 216 246
D 22 22 24 24
W 6 6 8 8
T 6 6 7 7
G 18.5 18.5 20 20

*Note: We can manufacture products according to customer’s requirements.

Motor characteristic curve
A:Continuous work area;B:Short-term work area

 

Company Profile

 

ZheJiang KND Automation Technology CO.,Ltd

ABOUT US
 

ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
 

PRODUCT DISTRIBUTION

           

MOTOR OVERVIEW
 

K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.

ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.

ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.

FAQ

Payments

1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please  check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
  1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
  2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
  3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.

 If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.

Application: Universal, Industrial
Operating Speed: Constant Speed
Operation Mode: Electric Motor

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

China Standard Kc130-M15020 (Z) AC Synchronous Servo Three Phase Electric Motor for Machine Tools   with Great quality China Standard Kc130-M15020 (Z) AC Synchronous Servo Three Phase Electric Motor for Machine Tools   with Great quality
editor by CX 2023-10-20

China best Ka130-M05430 AC Synchronous Servo Three Phase Electric Motor for Machine Tools vacuum pump ac system

Product Description

Product Description

 

  • Motor Features
  • Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)  
  • Equipped with high resolution encoder (23-bit absolute encoder)
  • Maximum torque 300%, stronger overload capacity
  • The protection level is increased to IP67
  • The vibration level is raised to A level
  • Motor heating is reduced by 20%
  • 380V motor, rated speed improved

Wiring

Power Socket
4-core: Sockets of KA110/ KA130/KD130 series are universal

Winding U V W PE
Core No. 2 3 4 1

4-core: applicable for 110/130 throwing line series

Winding U V W PE
Core No. 2 3 4 1

23/25-bit Absolute Encoder Socket
7-core: applicable for KA110/KA130/KD130/KA180/KD180 serie

Signal 5V SD+ 0V SD- E+ E- FG
Core No. 7 6 5 4 3 2 1

7-core:applicable for 110/130 throwing line series

Signal 5V SD+ 0V SD- E+ E- FG
Core No. 7 6 5 4 3 2 1

17-bit Absolute Encoder Socket
10-core:applicable for KA110/KA130 serie

Signal 5V 485+ GND 485- Battery
+
Battery
GND
FG
Core No. 7 6 5 4 3 2 10

Resolver Socket
7-core:applicable for KD130 series

Signal SIN- SIN+ COS- COS+ EXC- EXC+ FG
Core No. 7 6 5 4 3 2 1

Power off Brake Socket
2-core: socket of 110/130/180 series are universa

Signal DC24V(Non-polar)
Core No. 1 2

2-core: applicable for 110/130 throwing line series

Signal DC24V(Non-polar)
Core No. 1 2

Parameters of Motor Equipped with Power-off Brake

Frame NO. Rated torque Rated voltage Rated current Rated power Increased weight
130 Series 12 Nm DC24V 0.69A±10% 16.5W 1.06Kg

 

Specification & Dimension

 

Model KA130 KA130 KA130 KA130 KA130 KA130 KA130 KA130
M05415 M06415 M08415 M10015 M11515 M15015 M571 M08430
Rated power (kW) 0.85 1.0 1.3 1.6 1.8 2.3 1.7 2.6
Rated torque (N.m) 5.4 6.4 8.4 10 11.5 15 5.4 8.4
Maximum instantaneous torque (N.m) 16.2 19.2 25.2 30 34.5 45 16.2 25.2
Rated speed (rpm) 1500 1500 1500 1500 1500 1500 3000 3000
Maximum speed (rpm) 3000 3000 3000 3000 3000 3000 4000 4000
Rated current (A) 6.5 7.8 8.5 10.5 12.5 15.5 6.5 9.5
Maximum instantaneous current (A) 19.5 23.4 25.5 31.5 37.5 46.5 19.5 28.5
Rotor inertia (kg*cm^2) 12.58 12.58 18.59 25.31 32.37 42.97 18.59 32.37
Weight(Kg)(Without brake) 5.7 5.7 7.2 8.8 10.5 13.0 7.2 10.5
Pole pairs 5
Adapted driver work voltage (VAC) 220
Insulation class F
Protection level IP67
Installation type Flange mounting
Environment Temperature -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing)
Humidity 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation)
Air Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust
Vibration Vibration speed below 0.5mm/s
LL Without brake 145 145 162 181 201 231 162 201
With brake 172 172 189 208 228 273 189 228

*Note: We can manufacture products according to customer’s requirements.

Motor characteristic curve
A:Continuous work area;B:Short-term work area

 

Company Profile

 

ZheJiang KND Automation Technology CO.,Ltd

ABOUT US
 

ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
 

PRODUCT DISTRIBUTION

                               CNC system                                       Robot controller                      Universal automation controller

                 Servo drives                                         Servo motors                          KWS Industrial Interconnection

MOTOR OVERVIEW
 

K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.

ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.

ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.

FAQ

Payments

1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.

Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please  check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
  1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
  2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
  3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.

 If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.

Application: Universal, Industrial
Operating Speed: Constant Speed
Operation Mode: Electric Motor

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

China best Ka130-M05430 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   vacuum pump ac system	China best Ka130-M05430 AC Synchronous Servo Three Phase Electric Motor for Machine Tools   vacuum pump ac system
editor by CX 2023-10-20

China wholesaler China 1000rpm High Speed 400W Electric 48V BLDC Brushless Planetary Gear Motor for CNC Milling and Drilling Machine manufacturer

Product Description

BG 80BL DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

 

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG 80BL01 48 220 3000 0.7 5.5 4000 1.37   2.1   16.5
BG 80BL02 310 440 6000 0.7 1.7 8000 0.4 2.1 5.1
BG 80BL03 48 400 3000 1.27 10 4000 2.5 30 30
We can also customize products according to customer requirements.

 

 Planetary Gear Motor Technical Data-BG
Ratio 3 6  10  24 36 64 96 216
NO-load speed 1333 666 250 166 111 62.5 41 18
Rated speed(rpm) 1000 500 187 125 83 46 31 13
Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70

Established in 1994, HangZhou BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm gear motors, Universal motors and AC motors. We have a plant area of 6000 square meters, multiple patent certificates, and we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. Since the beginning of its establishment, BG motor has focused on the overall solution of motors. We manufacture and design motors, provide professional customized services, respond quickly to customer needs, and actively help customers to solve problems. Our motor products are exported to 20 countries, including the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Sun, has more than 40 years of experience in motor technology, and our other engineers also have more than 15 years of experience, and 60% of our staff have more than 10 years of experience, and we can assure you that the quality of our motors is top notch.
The products cover AGV, underwater robots, robots, sewing machine industry, automobiles, medical equipment, automatic doors, lifting equipment, industrial equipment and have a wide range of applications.
We strive for CZPT in the quality of each product, and we are only a small and sophisticated manufacturer.
Our vision: Drive the world forward and make life better!

Q:1.What kind of motors can you provide?

A:At present, we mainly produce brushless DC motors, brush DC motors, AC motors, Universal Motors; the power of the motor is less than 5000W, and the diameter of the motor is not more than 200mm;

Q:2.Can you send me a price list?

A:For all of our motors, they are customized based on different requirements like lifetime, noise,voltage,and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.

Q:3.Can l get some samples?

A:It depends. If only a few samples for personal use or replacement, I am afraid it’ll be difficult for us to provide because all of our motors are custom made and no stock available if there are no further needs. If just sample testing before the official order and our MOQ,price and other terms are acceptable,we’d love to provide samples.

Q4:Can you provide OEM or ODM service?

A:Yes,OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Q5:Can l visit your factory before we place an order?

A:welcome to visit our factory,wear every pleased if we have the chance to know each other more.

Q:6.What’s the lead time for a regular order?

A:For orders, the standard lead time is 15-20 days and this time can be shorter or longer based on the different model,period and quantity.

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Motor

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China wholesaler China 1000rpm High Speed 400W Electric 48V BLDC Brushless Planetary Gear Motor for CNC Milling and Drilling Machine   manufacturer China wholesaler China 1000rpm High Speed 400W Electric 48V BLDC Brushless Planetary Gear Motor for CNC Milling and Drilling Machine   manufacturer
editor by CX 2023-06-05