Model Number: YS-7104-4
Output Power: 0.18kw
Type: Asynchronous Motor
Frequency: 50HZ/60HZ
Phase: Three-phase
Protect Feature: Totally Enclosed
AC Voltage: 220V /380V
Efficiency: IE 2
Certification: CCC, ce
Housing: Aluminium
Rated Speed: 1500(r/min)
Weight: 10KG
Protection class: IP54/IP55
Warranty: 1 Year
Structure: IMB3/B5/B35/V1
Function: Control
Cooling method: IC411
Winding: 100% Cooper Wire
Packaging Details: Cartons or wooden cases
Port: ZheJiang , HangZhou
HangZhou Nanfang Motor Co., Ltd. (Herein after Nanfang) was established in 1992 with the registered capital of RMB 38 million. Nanfang is 1 of the best motor manufacturers in China with annual capacity of 500,000 sets. It has an area of 30,000 square meters, over 220 staff including 26 professional technicians. Its major products are reducers-exclusive motor, YS series fractional horsepower motor,YE3 series and YX3 series high efficiency motor, YEJ series brake motor, YVP series variable frequency motor, YB3 series explosion-proof motor, YD series double-speed motor, aluminum-shell motors and other specialized motors. Nanfang motor has been certificated by IS0 9001 , 3C and CE since 2001.
Brief introduction of Low-power induction Motor
YS series three-phase induction motor commonly is used for industrial production and daily electric appliance and has a big proportion in micro-electric-machinery.Horsepower series electric machinery is widely used for small model machinery, such as small model air-compressed,mineral industry tools,spinner,chemical industrial equipment and medical instrument, ect. YS type 3-phase asynchronous motor, power at 180-750watt, starting force at 2.2 times, overload capacity at 2.4 times.The designations, signs and nominal values are all in conformity with I.E.C standards.
BENEFITS
1) Water dust and corrosion resistant
2) Quiet operation
3)simple,safe,and convenient
4) Reliable in country, city or factory environment
5) Very low vibration
6) Very low power consumption
7) Superior life
8)high output and high torque
| Site conditions | Motors are suitable for most working environment at temperature from -15°C t0 +40°C and altitude below 1000 meters |
| Insulation | The motors’ insulation system is set to Class F(105K), examined by Class B(80K), which ensure the life span and reliability of the motors. |
| Motor protection | Motors can be installed with PTC, PT100 used as winding and bearing temperature measurement on request. |
| Voltage and frequency | Standard voltage and frequency is 380V 50HZ, and can be set to any single voltage in the range of 200-660V at a frequency of 50 or 60HZ. The motors work well within variations of ±5% from the rated voltage. |
| Vibration | Motors are designed to vibration class A, vibration class B is available on request. |
| Duty | Continuous(S1) |
| Cooling and ventilation | The standard cooling method is totally enclosed fan cooled(TEFC) in accordance with IC411 of IEC60034-6. Standard motors are equipped with auxiliary plastic fans. |
| Winding | 100% Cooper Wire |
| Protection class | The standard protection class is IP54/IP55, which can be used in humid and dusty environment. Higher degrees of protection is available. |
| Quality assurance | From the first line of production designing till the finishing procedure, obey ISO9001 documented quality system. |
| 1 | Shaft cover | 11 | IP55 gasket | 21 | Ring for lightening |
| 2 | V-ring | 12 | Mains power connection terminal block | 22 | Fan cover |
| 3 | Motor clamping screws | 13 | Terminal block box- base | 23 | Motor indentification plate |
| 4 | Spring ring | 14 | IP65 gasket | 24 | Motor indentification plate lightening screws |
| 5 | Shield | 15 | Terminal block box- cover | 25 | B5 motor casing |
| 6 | Bearing | 16 | Terminal block box- lightening screws | 26 | B5 flange |
| 7 | Motor Shaft | 17 | Cable inlet bush | 27 | B14 flange |
| 8 | Rotor | 18 | Compensation ring | 28 | Sealing ring |
| 9 | Wound stator | 19 | Fan cover lightening screws | 29 | Shaft key |
| 10 | Motor casing B3-B5 | 20 | PVC fan |
YS series three-phase induction motor mounting dimension
View more details, please click here.
FAQ
More details, welcome to call us!Q: What are the payment terms?A: 30% T/T in advance, 70% before shipment, L/C at sight, trade assurance from alibaba.
Q: What is your delivery time? A: Different models with different time, 10-50 days after order confirmed.
Q: What is your MOQ?A: It depends on model.Q: Where is your loading port?A: ZheJiang or HangZhou Port, China.
About how to inquiry and place an order, how to install, operate and maintain motors, please refer to this website.
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
editor by czh
