Tag Archives: motor encoder

China ZLTECH IP65 8inch 48V 20-60N.m 800W 8.5-25A single shaft dual wheel hub servo motor 1024-wire encoder for RGV robot motor brushes

Guarantee: 3months-1year
Design Quantity: ZLLG80ASM800 V1.
Usage: Robot, AGV
Variety: SERVO MOTOR
Torque: 20N.m
Design: Long lasting Magnet
Commutation: Brushless
Protect Attribute: Ip65
Velocity(RPM): 150RPM
Continuous Recent(A): 8.five
Effectiveness: eighty%
Tire diameter: 200mm
Poles No (Pair): 20 polos
Load potential: 300kg/2 wheels
Encoder: 1571 optical encoder
Tire: Rubber tire/PU tire
Precision: ±1RPM
Max torque: 60N.m
Max current: 25A
Max speed: 180RPM
Shift Pace(m/s): 2.1-3.1m/s
Packaging Details: Wrapped with plastic bags and embedded in the foam.Carton measurement: 41cmx33cmx23.5cm.QTY: 2pcs for every carton.Carton Excess weight: 20kg/2pcs.

ZLTECH IP65 8inch 48V 20N.m 800W rubber tire one shaft twin wheel hub servo motor with 1571-wire encoder for RGV robotic Items Software Parameters & Modified Bicycle Large Torque Motor MY1016Z Brush DC Equipment Motor 12V24V36V250W350W Dc Brush Gear Motor Dimensions Information Edge Equivalent Products Surroundings & Equipment Certifications & 12V-40V 10A PWM DC Motor Pace Controller w Knob–High Performance, Higher Torque, Lower Warmth Producing electric powered motor controller Cooparations Packaging & Delivery

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China ZLTECH IP65 8inch 48V 20-60N.m 800W 8.5-25A single shaft dual wheel hub servo motor 1024-wire encoder for RGV robot motor brushes
editor by czh 2023-02-22

China ZHAOWEI PD022022-64 6v 12v 24v 8kg.cm 117rpm Planetary gearbox 22mm high torque micro dc gear motor with Encoder for medical with Best Sales

Warranty: Other
Model Variety: PD571571-64
Utilization: BOAT, Car, Electric Bicycle, Admirer, House Appliance, 1HP 2HP 3HP 5HP 10HP 20HP 30HP 40HP 50HP Electric Motor Cosmetic instrument, Wise House, door lock, Model Trains, Model Airplane
Type: Gear MOTOR
Torque: Rated torque: 8kgf.cm
Construction: Long term Magnet
Commutation: Brush
Shield Attribute: Completely Enclosed
Speed(RPM): 117±17% rpm
Steady Recent(A): Rated present: 300mA, New and authentic Stepping morot deiver AZM66MC servo motor Orientalmotor max
Effectiveness: IE 2
Merchandise Title: 22mm planetary equipment motor
Motor sort: ,dc brushless motor,stepper motor,coreless moror
present: 300ma max
Rated Speed: 117rpm
max pace: 469rpm
max rated torque: 8kgf.cm
max instant torque: 20kgf.cm
gear ratio: sixty four
gearbox size: 33.7mm
general size: seventy two.1mm
Packaging Particulars: paper box
Port: HangZhou

Motor Requirements:22mm motor
motors(optional)	coreless motor,brushless dc motor, MY1016Z 24V 250W Electric powered DC Motor Brush Motor for Electric Bike Conversion Kit Electric powered Bicycle Scooter Motor stepper motor
voltage(optional)	DC 3-24v
enter speed	<=15000rpm
current	300mA max

Performance Data:22mm plastic planetary equipment motor
Model	Rated Speed	Max Speed	Max Rated Torque	Max Instantaneous Torque	Reduction Ratio	gearbox Duration	Overall Length
	rpm	rpm	gf.cm	gf.cm		mm	mm
PD571571-four	1875	7500	8000	20000	4	19.1	57.5
PD571571-six	1250	5000	8000	20000	6	19.1	57.5
PD571571-16	469	1875	8000	20000	16	26.four	64.8
PD571571-24	313	1250	8000	20000	24	26.four	64.8
PD571571-36	208	833	8000	20000	36	26.4	64.8
PD571571-64	117	469	8000	20000	64	33.7	72.1
PD571571-ninety six	78	313	8000	20000	96	33.seven	72.one
PD571571-one hundred forty four	52	208	8000	20000	one hundred forty four	33.7	seventy two.one
PD571571-216	35	139	8000	20000	216	33.7	seventy two.one
PD571571-256	29	117	8000	20000	256	41.	seventy nine.four
PD571571-384	20	78	8000	20000	384	41.	seventy nine.4
PD571571-576	13	52	8000	20000	576	forty one.	seventy nine.four
PD571571-864	9	35	8000	20000	864	41.	seventy nine.4
PD571571-1296	six	23	8000	20000	1296	41.	79.four
* The over requirements are subject to alter with out prior observe. They are for reference only and can be tailored as necessary.

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China ZHAOWEI PD022022-64 6v 12v 24v 8kg.cm 117rpm Planetary gearbox 22mm high torque micro dc gear motor with Encoder for medical with Best Sales
editor by czh 2023-02-22

China SIAECOSYSFARDRIVER ND72360B Electric Motorcycle Controller 360A 3k-4kW BLDC Programmable For QS 165 Encoder Mid Drive Motor ac motor

Guarantee: 15months
Product Variety: ND72360B
Rated Voltage: 72V
Max DC Present: 190A
Defend Phase Recent: 360A
Adaptation Motor: 3-5KW
Waterproof Grade: IP67
Solution Name: Controller
High quality: High Functionality
Colour: Black
MOQ: one
Packing: Carton

SIAECOSYS/FARDRIVER ND72360B Large Electricity Electric powered Motorcycle Controller 360A 3000-4000W BLDC Programmable For QSMotor a hundred sixty five Encoder Version Mid Generate MotorFarDriver controller is sine wave type controller, which is brushless DC controller with self-understanding operate. Typically, it matches effectively with QS Encoder Motors(165 encoder motor), if you want to match with new model encoder motor, AV massage wand electric small small 260 HangZhou vibrating mini R260 micro dc motor some parameters need to be analyzed by oneself.

P.S. If you have any confused about the shipping price, please feel cost-free to speak to with us.
Also could place get but do not spend first, then we could alter the cost.

Now we offer USB cable as default rather of Bluetooth, AT02 Manufacturing facility Line CuttingStampingOil InjectionWinding Personalized A variety of Servo Motor Collection Components Rotor Stator please famous!!!

A single established like underneath kits
1. 1pcs X ND72360B Encoder variation motor controller
2. 1pcs X USB Cable

Essential Attributes
one). All the uncooked resources are imported, unique servo motors and motorists SGMAV-04A3A2C employing large-functionality Moss tube
2). With the aluminum substrate plan, the Moss tube is laid on the aluminum substrate and then put on the PCB board
3). Modest in measurement
4). Large efficiency, minimal temperature rise, little managing current
five). With self-studying function, 42mm 12v bldc 8000rpm 50W dc brushless motor superb commonality
six). The application suitable with Android and Apple
seven). With flux weakening function.(The item does not include magnetism)

ND72360B is sine wave encoder controller with waterproofing grade IP67, fit for 3-5kw motors.
The rated voltage is 72V
It’s encoder model (as default) which match with our 165 encoder motors.
Please observe that ND72360B encoder controller only assistance One particular Line speedometer(like DKD).

Drawing

Harness Definition

Adapter Cable

USB cable

Software program interface(Personal computer)

Programmable Software program & Consumer guide (Just before you received the controller)
Pls. Get in touch with with sales to get the hyperlink and password to obtain the manuals and software program just before/when you received the controllers.

Application

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China SIAECOSYSFARDRIVER ND72360B Electric Motorcycle Controller 360A 3k-4kW BLDC Programmable For QS 165 Encoder Mid Drive Motor ac motor
editor by czh 2023-02-21

China JD-power MYH-4621F 4008 external rotor motor flat dc servo gimbal brushless industrial robot arm rc motor with encoder dc motor

Guarantee: Other
Model Amount: MYH-4621F
Utilization: Gimbal digital camera stabilizer industrial robot arm robotic arm
Sort: SERVO MOTOR
Torque: Max 1.9kgf-cm, can be tailored
Building: Permanent Magnet
Commutation: Brushless
Safeguard Feature: Entirely Enclosed
Speed(RPM): sixty eight RPM/V, can be tailored
Constant Existing(A): 1.1A
Effectiveness: Other
Merchandise Identify: flat gimbal brushless servo immediate generate motor with encoder
Motor Measurement: 46*21mm
Stator Dimension: 40*8mm
Bodyweight: 125g
Configuration: 24N22P
Shaft: hollow shaft
Encoder: 5048A
Certification: ce,RoHS
Coloration: can be tailored
Packaging Particulars: Normal carton box with foam
Port: HangZhou

Solution NameJD-electricity MYH-4621F 4008 external rotor motor flat dc servo gimbal brushless industrial robotic arm rc motor with encoder
Perfect for gimbal stabilizer/robotic mechanical arm. Special flat structure design and style of hollow shaft with encoder

For a lot more motors of the exact same series, you should simply click on the picture below

ParametersParameters can be personalized in accordance to certain demands, OEM/ODM are welcome

Packaging & Shipping1) Packing : Standrad carton box with foam
2) Shipping and delivery : Shipping and delivery time is dependent on stock degree and buy quantity
Company InformationHangZhou JD-electrical power Technology Co.,Ltd is a producer specialised in brushless dc motor which are primarily utilized to photographic equipment(stabilizer and stick to emphasis), photoelectric merchandise(rotating LED exhibit), automobile left window carry motor 4L DC 24V 90RPM D Minimize shaft prolonged 20MM diameter 10MM dc motor for car window lifting intelligent robotic mechanical arm, precision instruments(medical and biochemistry equipment), industrial drone, unmanned aerial automobile, underwater robotic, FPV racing drone, electric resources, practical transportation equipment, house appliances, HJ35D Phase Servo Motor Pulse Controller Clever Programmable Controller Stepper servo motor dual axis controller automotive electronics (scHangZhou radar ) and so on..

Our merchandise have been trustworthy and commonly praised by customers with full variety of product types, professional customization companies, large high quality, stable overall performance and low mend price. We have prosperous expertise and superb design engineer to customise all sorts of brushless dc motor. Welcome to customise, OEM/ODM are available.

Our Advantages1) We have specialist and seasoned R&D group, extreme quality controlling program and expert employees which make us more aggressive to supply our clients with large quality and overall performance products.
2) We can customize all sorts of brushless motor as your special requirements no issue how challenging the engineering is if you have a considerable amount.
3)Make sure you remember that we are a manufacturing facility instead than a investing company, so we can give you a manufacturing facility price tag while we can straight management and ensure the top quality of our motors.
FAQ1) Are you a manufacturing unit or trading company?
We are a manufacturing facility specialized in brushless DC motor.

2) What is your ensure for the products?
We can offer the technological help and spare parts for the restore if any top quality difficulties, and will follow the problems right up until you are pleased.

three)Can you give OEM or ODM services?
Of course, Flipsky 5065 Do-it-yourself Electrical Skateboard Scooter Long Board Motor BLDC 270KV 1550W Belt DC Motor each OEM and ODM are welcomed.

Benefits of a Planetary Motor

planetary gears

planetary gearboxes

planetary gear motors

planetary gears vs spur gears

planetary gearboxes as a compact alternative to pinion-and-gear reducers

China JD-power MYH-4621F 4008 external rotor motor flat dc servo gimbal brushless industrial robot arm rc motor with encoder dc motor
editor by czh 2023-02-19

China Dmke 12V 24V 36V 48V 310V Electric DC Brushless DC Geared Servo Motor/ BLDC Motor with Encoder / Planetary Gearbox / Brake motorbase

Product Description

Merchandise Description

Feature:

A. High power assortment from 75W to 15KW
B. Dia: 57mm-180mm
C. Straightforward for speed & course adjustment
D. Prosperous inventory and quick shipping and delivery time in ten working times
E. Robust stability for driver/controller
F. Lifetime over steady 10000 hrs
G. IP65 protection rank is available for us
H. Earlier mentioned 90% enery efficiency motor is obtainable
I. 3D file is offered if consumers required
K.Higher-performance and secure matching driver and controller

Δ Kindly remind: As various clients may need various motor parameter for fitting your equipment. If below motor can not in shape your need, remember to kindly send inquiry to us with details for rated electricity or torque,rated velocity, and rated voltage for our new dimensions drawing producing for you. Click on Listed here to get in touch with me. Many thanks a great deal!

Dimensions (Device: mm )
Mounting screws are included with gear head.

Gearbox Specification:

Gearbox Kind

PLF60/PLE60

ZPLF60/ZPLE60

Deceleration phase

one

two

Length

119

a hundred thirty five

151

129.five

161

177

Reduction ratio

Stage 1: 3, 4, 5, 7, 10
Amount 2: 16, 20, twenty five, 28, 35, 40, 70
Amount 3: sixty four, 80, one hundred, a hundred twenty five, one hundred forty, a hundred seventy five, 200, 250

57mm 100W BLDC motor with PLF60/PLE60 Planetary Gearbox

Other Specification Sort:

Δ Motor interface, Voltage, Pace can be custom-made.

For Far more Particulars Of Item Specifications,
Make sure you Click on listed here contact us for up-to-date dimensions drawing if you have other distinct parameter needed. Thanks

Much more Motor Flange Measurement

Δ Much more Motor Flange Dimension to decide on, if you need to have other size. Welcome to speak to us to custom.

BLDC Motor with Gearbox Variety

Business Profile

DMKE motor was founded in China, HangZhou town,Xihu (West Lake) Dis. district, in 2009. Soon after twelve years’ creative imagination and improvement, we became 1 of the foremost high-tech firms in China in dc motor market.

We specialize in higher precision micro dc equipment motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers and so forth. And we create brushless dc motor and controller with vast electrical power assortment from 5 watt to 20 kilowatt also dc servo motor electrical power variety from 50 watt to 10 kilowatt. They are extensively utilized in computerized guided automobile , robots, lifting equipment,cleansing equipment, health-related tools, packing machinery, and numerous other industrial automated equipments.

With a plant location of 4000 square meters, we have developed our own supply chain with higher quality manage standard and handed ISO9001 certificate of quality system.

With a lot more than 10 engineers for brushless dc motor and controllers’ analysis and development, we possess sturdy unbiased layout and advancement capacity. Personalized-created motors and controllers are widely acknowledged by us. At the very same time, we have engineers who can speak fluent English. That makes we can offer intime right after-income help and direction smoothly for our consumers.

Our motors are exported around the world, and above eighty% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea and many others. We are searching forward to establishing prolonged-time period enterprise connection jointly with you for mutual business good results.

FAQ

Q1: What kind motors you can offer?
A1: For now, we mostly offer everlasting magnet brushless dc motor, dc gear motor, micro dc motor, planetary equipment motor, dc servo motor, brush dc motors, with diameter assortment from 16 to 220mm,and electrical power range from 5W to 20KW.

Q2: Is there a MOQ for your motors?
A2: No. we can acknowledge 1 pcs for sample creating for your screening,and the price for sample making will have ten% to thirty% difference than bulk cost based on distinct style.

Q3: Could you ship me a cost list?
A3: For all of our motors, they are tailored dependent on various demands like electrical power, voltage, equipment ratio, rated torque and shaft diameter and so on. The cost also differs according to distinct buy qty. So it really is tough for us to give a cost listing.
If you can share your thorough specification and order qty, we’ll see what offer we can supply.

Q4: Are you motors reversible?
A4: Indeed, nearly all dc and ac motor are reversible. We have specialized folks who can educate how to get the purpose by different wire relationship.

Q5: Is it attainable for you to build new motors if we offer the tooling value?
A5: Indeed. Remember to kindly share the comprehensive demands like overall performance, size, once-a-year quantity, target price tag and so on. Then we’ll make our analysis to see if we can set up or not.

Q6:How about your shipping time?
A6: For micro brush dc equipment motor, the sample delivery time is 2-5 times, bulk shipping and delivery time is about fifteen-twenty days, relies upon on the order qty.
For brushless dc motor, the sample supply time is about 10-fifteen times bulk time is 15-twenty times.
Pleasecontact us for ultimate reference.

Q7:What is actually your warranty conditions?
A6: A single yr

Application:	Universal, Industrial, Household Appliances, Power Tools
Operating Speed:	Adjust Speed
Excitation Mode:	Compound
Function:	Control, Driving
Casing Protection:	Protection Type
Number of Poles:	8

###

Samples:	US$ 768/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Gearbox Type	PLF60/PLE60			ZPLF60/ZPLE60
Deceleration stage	1	2	3	1	2	3
Length	119	135	151	129.5	161	177
Reduction ratio	Level 1: 3, 4, 5, 7, 10 Level 2: 16, 20, 25, 28, 35, 40, 70 Level 3: 64, 80, 100, 125, 140, 175, 200, 250

Application:	Universal, Industrial, Household Appliances, Power Tools
Operating Speed:	Adjust Speed
Excitation Mode:	Compound
Function:	Control, Driving
Casing Protection:	Protection Type
Number of Poles:	8

###

Samples:	US$ 768/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Gearbox Type	PLF60/PLE60			ZPLF60/ZPLE60
Deceleration stage	1	2	3	1	2	3
Length	119	135	151	129.5	161	177
Reduction ratio	Level 1: 3, 4, 5, 7, 10 Level 2: 16, 20, 25, 28, 35, 40, 70 Level 3: 64, 80, 100, 125, 140, 175, 200, 250

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Dmke 12V 24V 36V 48V 310V Electric DC Brushless DC Geared Servo Motor/ BLDC Motor with Encoder / Planetary Gearbox / Brake motorbase
editor by czh 2023-01-07

China 28mm 24V Brushed DC Planetary Geared DC Motor with Encoder with Best Sales

Product Description

A. 28mm 24V Brushed DC Planetary Geared Dc Motor with Encoder Specification:

B. About CZPT Company
HangZhou CZPT Co. Ltd is a manufacturer and exporter of virious of motors,

Our Product range are:
DC Brush motor: 6-130mm diameter, 0.1-1500W output power.
Brushless DC Motor: 28-110mm, 5-800W output power
DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power
DC Planeary Gear Motor: 10-82mm diameter, 0.1-200W output power
Stepper Motor: NEMA 08 to NEMA 43, Can contact with gearox and lead screw
AC Gear Motor: 42 to 104mm diameter, 6-200 output power

Compare with other competitors, Our advantages are:

1) High Quality Guarantee: 11 years experiences in this field makes us have mature manufacturing process, Most of motors have CE, RoHS certificates.
2) Experience: Till Augest, 2016, We had export our goods to 77 different countries like US, Germany, UK, Japan, Brizal,Russia and so on.
3) Competitive Price: We have a very high competitive ability of the list prices based on low cost labour force in China.
4) Good Service: CZPT sales are professional and with good attitude, We will response with our customer within 24 hours(Holiday excepted), So you don’t need way about can’t not find the person when have agent things.
5) MOQ: Small Orders Accepted

6) On Time Delivery: 7-15 working days lead time for normal motors, Custmoized motor lead time are also less than 20 working days.
7) Customized service: Our experienced R&D team can support customized motor if necessary.
Still need more reasons? Now begin business with CZPT MOTOR, You will find we are a reliable and trustworthy in China.

Company Capacity
1. Production line

2. Test equipment:

3. Certificates:

4 Exhibitions And Customer Visit:

5. FAQ(Q=Question, A=Answer)

Q: What’s your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q:Do you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some CZPT charge and design charge.

Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.

Q:What’s your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders

Q:What’s your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.

Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.

Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.

Q:What’s the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders.

Q:What’s your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.

Q:What certifications do you have?
A:We currently have CE and ROSH certifications.

Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not CZPT to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.

Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!

Weclome contact with us if have any questions about this motor or other products!

Application:	Universal
Operating Speed:	Low Speed
Function:	Driving
Casing Protection:	Closed Type
Structure and Working Principle:	Brush
Type:	PMDC

###

Samples:	US$ 20/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Application:	Universal
Operating Speed:	Low Speed
Function:	Driving
Casing Protection:	Closed Type
Structure and Working Principle:	Brush
Type:	PMDC

###

Samples:	US$ 20/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Benefits of a Planetary Motor

planetary gears

planetary gearboxes

planetary gear motors

planetary gears vs spur gears

planetary gearboxes as a compact alternative to pinion-and-gear reducers

China 28mm 24V Brushed DC Planetary Geared DC Motor with Encoder with Best Sales
editor by czh 2022-11-28

China Custom High Torque 24V DC Planetary Gear Robot Motor 24V BLDC Motor with Hall Encoder dc motor

Product Description

Custom High Torque 24V DC Planetary Gear Robot Motor 24V BLDC Motor with Hall Encoder

Model Number:KY80AS5714-15PGL60-10
Usage:Boat, Car, Fan
Certification:CE
Type:Servo Motor
Torque:22N.M
Construction:Permanent Magnet
Commutation:Brushless
Protect Feature:Drip-proof
Speed(RPM):150r/min
Continuous Current(A):22A
Output Power:400W
Voltage(V):24VDC
Efficiency:IE 1
Application:robot
Product Name:24v bldc motor with hall encoder
Motor type:BLDC MOTOR
Keywords:SERVO MOTOR
Rated Voltage:24VDC
Color:Black
Diameter:80MM
POWER:400W
Rated speed:1500 10%rpm
MOTOR TORQUE:2.55N.M

Product Description

Product Features:
*High Torque to inertia ratio&up to 15000Nm/kgm²
*Fast dynamic response *time constant <20ms
*Wide speed adjusting&feedback up to 1000:1
*Steady speed precision up to 0.5%
*High overload,2Mn/30s,3.5N.m/10s
*Small volume and light
*Silent,the lowest noise is only 45dB(A)
*Protected with IP65,Class F insulation
Industry class
1.The altitude should be over 1000 meters above sea level
2.Environment temperature:+5ºC~+40ºC
3.The month average tallest relative humidity is 90%,at the same the month average lowest temperature is less than 25ºC.

Parameters

Model	Volt	Power	Rated Torque	Rated Speed	Rated Current	Peak Torque	Encoder	Weight
Unit	V	W	Nm	r/min	A	Nm	P/R	kg
KY60AS5711-30	24	100	0.318	3000	5.4	0.95	2500	1.5
KY80AS5712-15	12	200	1.27	1500	22	3.8	2500	2.2
KY80AS5712-15	24/48	200	1.27	1500	9.4	3.8	2500	2.2
KY80AS5714-15	12	400	2.55	1500	44	7.65	2500	3.6
KY80AS5714-15	24/48	400	2.55	1500	21.3	7.65	2500	3.6
KY80AS5714-30	12	400	1.27	3000	44	3.8	2500	2.2
KY80AS5714-30	24/48	400	1.27	3000	18.8	3.8	2500	2.2
KY110AS0405-15	48	500	3.1	1500	14	10.8	2500	6
KY110AS5717-15	24	750	4.77	1500	41	16.6	2500	6
KY110AS0408-15	48	800	5	1500	22	17.9	2500	7.8
KY110AS5710-15	24	1000	6.3	1500	55	21.4	2500	7.8
KY110AS571-15	48	1000	6.3	1500	28	22	2500	7.8
KY110AS 0571 -12	48	1200	4.5	2500	33	15.7	2500	7.8
KY110AS571-15	48	1500	9.5	1500	37.5	28	2500	10
KY110AS0420-25	48	2000	7.6	2500	55	26	2500	10
KY130AS0430-15	48	3000	19	1500	73	57	2500	14

Gear ratio

1:7.5

1:10

1:15

1:20

1:25

1:30

1:40

1:50

1:60

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Industrial
Operating Speed:	Adjust Speed
Excitation Mode:	Excited
Function:	Control
Casing Protection:	Protection Type
Number of Poles:	10

###

Samples:	US$ 285/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Volt	Power	Rated Torque	Rated Speed	Rated Current	Peak Torque	Encoder	Weight
Unit	V	W	Nm	r/min	A	Nm	P/R	kg
KY60AS0201-30	24	100	0.318	3000	5.4	0.95	2500	1.5
KY80AS0102-15	12	200	1.27	1500	22	3.8	2500	2.2
KY80AS0202-15	24/48	200	1.27	1500	9.4	3.8	2500	2.2
KY80AS0104-15	12	400	2.55	1500	44	7.65	2500	3.6
KY80AS0204-15	24/48	400	2.55	1500	21.3	7.65	2500	3.6
KY80AS0104-30	12	400	1.27	3000	44	3.8	2500	2.2
KY80AS0204-30	24/48	400	1.27	3000	18.8	3.8	2500	2.2
KY110AS0405-15	48	500	3.1	1500	14	10.8	2500	6
KY110AS0207-15	24	750	4.77	1500	41	16.6	2500	6
KY110AS0408-15	48	800	5	1500	22	17.9	2500	7.8
KY110AS0210-15	24	1000	6.3	1500	55	21.4	2500	7.8
KY110AS0410-15	48	1000	6.3	1500	28	22	2500	7.8
KY110AS0412-12	48	1200	4.5	2500	33	15.7	2500	7.8
KY110AS0415-15	48	1500	9.5	1500	37.5	28	2500	10
KY110AS0420-25	48	2000	7.6	2500	55	26	2500	10
KY130AS0430-15	48	3000	19	1500	73	57	2500	14

###

Gear ratio

1:7.5

1:10

1:15

1:20

1:25

1:30

1:40

1:50

1:60

To Be Negotiated 1 Piece
(Min. Order)

###

Application:	Industrial
Operating Speed:	Adjust Speed
Excitation Mode:	Excited
Function:	Control
Casing Protection:	Protection Type
Number of Poles:	10

###

Samples:	US$ 285/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Volt	Power	Rated Torque	Rated Speed	Rated Current	Peak Torque	Encoder	Weight
Unit	V	W	Nm	r/min	A	Nm	P/R	kg
KY60AS0201-30	24	100	0.318	3000	5.4	0.95	2500	1.5
KY80AS0102-15	12	200	1.27	1500	22	3.8	2500	2.2
KY80AS0202-15	24/48	200	1.27	1500	9.4	3.8	2500	2.2
KY80AS0104-15	12	400	2.55	1500	44	7.65	2500	3.6
KY80AS0204-15	24/48	400	2.55	1500	21.3	7.65	2500	3.6
KY80AS0104-30	12	400	1.27	3000	44	3.8	2500	2.2
KY80AS0204-30	24/48	400	1.27	3000	18.8	3.8	2500	2.2
KY110AS0405-15	48	500	3.1	1500	14	10.8	2500	6
KY110AS0207-15	24	750	4.77	1500	41	16.6	2500	6
KY110AS0408-15	48	800	5	1500	22	17.9	2500	7.8
KY110AS0210-15	24	1000	6.3	1500	55	21.4	2500	7.8
KY110AS0410-15	48	1000	6.3	1500	28	22	2500	7.8
KY110AS0412-12	48	1200	4.5	2500	33	15.7	2500	7.8
KY110AS0415-15	48	1500	9.5	1500	37.5	28	2500	10
KY110AS0420-25	48	2000	7.6	2500	55	26	2500	10
KY130AS0430-15	48	3000	19	1500	73	57	2500	14

###

Gear ratio

1:7.5

1:10

1:15

1:20

1:25

1:30

1:40

1:50

1:60

The Benefits of Using a Gear Motor

Electric motor

Gear reducer

Motor shaft

First stage gears

China Custom High Torque 24V DC Planetary Gear Robot Motor 24V BLDC Motor with Hall Encoder dc motor
editor by czh 2022-11-26

China supplier JD-power MYH-11026J high torque flat outrunner motor with encoder industrial robot arm gimbal servo 24v bldc motor with Great quality

Warranty: Other
Model Number: MYH-11026J
Type: SERVO MOTOR
Torque: max 17kgf-cm (can be customized)
Construction: Permanent Magnet
Commutation: Brushless
Protect Feature: Other
Speed(RPM): 22RPM/V (can be customized)
Continuous Current(A): 1.8A
Efficiency: Other
Product Name: high torque flat outrunner servo motor with encoder
Motor Size: 110*26mm
Application: gimbal camera stabilizer industrial robot arm robotic arm, etc.
Weight: 643g
Shaft: hollow shaft
Stator Size: 100*10mm
Configuration: 36N42P
Encoder: 5048A
Certification: ce,RoHS
Color: can be customized
Packaging Details: Standard carton box with foam
Port: HangZhou

Product NameJD-power MYH-11026J high torque flat outrunner motor with encoder industrial robot arm gimbal servo 24v bldc motor
Ideal for gimbal stabilizer/robot mechanical arm. Special flat structure design of hollow shaft with encoder

For more motors of the same series, please click on the picture below

ParametersParameters can be customized according to specific requirements, OEM/ODM are welcome

Packaging & Shipping1) Packing : Standrad carton box with foam
2) Delivery : Delivery time depends on stock level and order quantity
Company InformationHangZhou JD-power Technology Co.,Ltd is a manufacturer specialized in brushless dc motor from china(gimbal, drone, industrial UAV, electric tools motor etc,). We have rich experience and excellent design engineer to customize all kinds of brushless dc motor. Welcome to customize, OEM/ODM are available.

Our Advantages1) We have professional and experienced R&D team, severe quality managing system and skilled workers which make us more competitive to provide our customers with high quality and performance products.
2) We can customize all kinds of brushless motor as your special requirements no matter how complicated the technology is if you have a considerable quantity.
3)Please remember that we are a factory rather than a trading company, so we can give you a factory price while we can directly control and guarantee the quality of our motors.
FAQ1) Are you a factory or trading company?
We are a factory specialized in brushless DC motor.

2) What is your guarantee for the products?
We can offer the technical support and spare parts for the repair if any quality problems, and will follow the problems until you are satisfied.

3)Can you provide OEM or ODM service?
Yes, OEM and ODM are both welcomed.

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China supplier JD-power MYH-11026J high torque flat outrunner motor with encoder industrial robot arm gimbal servo 24v bldc motor with Great quality

China OEM DC Gear Motor with Encoder 12V 24V 36V 48V High Torque Electric motor for Garage Door near me manufacturer

Warranty: 1 year
Model Number: D63R/L
Usage: BOAT, Car, Electric Bicycle, FAN, Home Appliance
Type: GEAR MOTOR
Torque: >6NM
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Drip-proof
Speed(RPM): 10-220rpm
Continuous Current(A): <=1A
Efficiency: IE 1
Diameter: 63mm
Gear material:: copper or plastic gear
Shaft diameter::: 6mm,8mm,10mm, 12mm
Application:: Curtain, actuator, Home Applicance
Motor type: D49R/L D59R/L D63R/L D76R/L D88R/L
Certification: CCC, CE, VDE, CQC

DC Motor 12V 24V 36V 48V Electric Motor with Gearbox High Torque Small Worm Gear Motor with Encoder for Medical ventilator, fishing system, treadmill, coffee grinder, robot, sweeper, welding machine etc.
Motor diameter:D49 D59 D63 D73 D76 D88
Output shaft:Half round key shaft, Solid round plain shaft, Spline shaft, D shape flat shaft, Double flat shaft, Square flat shaft.
Application: Rolling door, Sliding gate, wheel chair, table lift, welding machine, wire feeder, kitchen garbage disposer, robotic etc.

Click <<>>to get samples!

Click <<>> to get samples!

Click <<>>to send get samples!
FAQ Q: Are you trading company or manufacturer ?A: We are Integration of industry and trade, with over 20 years experience in DC worm gear motor. Our company have accumulated skilled production line, complete management and powerful research support, which could match all of the customers’ requirements and make them satisfaction.
Q: What is your main product?-DC Motor: Gear motor, Square motor, Stepped motor, and Micro motor-Welding equipment: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier-Car restyle: Electric step-Safety and security products: Welding helmet, Welding goggle, Welding clothes, Welding gloves, Safety helmet-Motors parts: Gears, Bearings, Connectors, Shafts-Other kinds of Motors: Fans, PumpsQ: What if I don’t know which DC motor I need?A: Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q: What is your terms of payment ?A: Payment=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us as below:

Q: How to delivery:
A: By sea – Buyer appoint forwarder, or our sales team find suitable forwarder for buyers.
By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)Others – Actually,samples send by DHL,UPS, TNT and Fedex etc. We arrange to delivery goods to some place from China appointed by buyers.
Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China OEM DC Gear Motor with Encoder 12V 24V 36V 48V High Torque Electric motor for Garage Door near me manufacturer

China supplier 2022 high torque worm 5882WG775 200w gear 100kg-cm 100rpm 36v dc motor with encoder with high quality

Warranty: 1year
Model Number: XH-5882WG/775
Usage: Smart trash,massager,physiothreapy
Type: worm gear motor
Torque: 12v 45kg.cm,24v 100kg.cm
Construction: Shunt Wound
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): (5-48)rpm
Continuous Current(A): 1.5-2.2A(no load)
Efficiency: IE 1, 62%
Product Name: 5882WG775 worm gear Motor
Rated voltage: 12v 24v dc
working voltage: 9-14v and 18-26v dc
Material: metal
Power: 38.4-62.4w
current: 2.2A(no load)
Noise: >45dB
Standard Shaft: D10mm
Brush Type: carbon
Packaging Details: 30 pcs/box,7 boxes/ctn, 210 pcs/ctn

2571 high torque worm 5882WG775 200w gear 100kg-cm 100rpm 36v dc motor with encoder Properties
1)Custom parameter as like radio to gearbox,length of shaft and shape,rpm,and torque.
2)high-end materials to apply.
3)right angle
4)easy instal and dissassemble
Gearbox dataDeceleration level4-level5-levelgearbox radio22/40/80/123/26571/548/780/1196Max rated Stall torque150Kg.cm200kg.cmMax stall torque200Kg.cm250Kg.cmEfficiency59%53% 5882WG775 parameter tableModelVoltageSpeed(no load)(rpm)Rated speed(rpm)Rated torque(kg.cm)Rated current(mA)weight(g)5882WG775-12V-2.512v2.521571001kg5882WG775-12V-443.28513005882WG775-12V-1313104012005882WG775-12V-242418259505882WG775-12V-484836357100
ModelVoltageSpeed(no load)(rpm)Rated speed(rpm)Rated torque(kg.cm)Rated current(mA)weight(g)5882WG775-24V-524v5420571501kg5882WG775-24V-8.58.56.516571005882WG775-24V-26262 0571 15005882WG775-24V-484836352200

More types to select
there are available models as like pumps,dc motor,dc reducer gear motor,dc worm gear motor,planetary dc gear motor,the special ones can be customized.

Details of Products
1)Copper-core motor
Three layer of high-density molecular paint,it keeps the dust out,high temperature resistance.
2)Powerful magnet
3)Ball bearing
it can reduce the friction and supply power.

Customized spares parts
1)voltage,current,speed and torque.
2)Shape of shaft:”D” “Round” “Flat” “Hexagon Axis” “Square axis”.
3)Bearing:ball bearing.
4)Materials of shell:plastic and metal.
5)Tooth form:Spur gear,helical gear.

Actual photos to show

ApplicationApplication
It can be widely applied for smart trash,massager,window pusher,physiothreapy bed…

Company InformationCompany profile
Xihu (West Lake) Dis. motor company founded in 2000year,focused R&D service,5QC,20 engineers,200workers,8 production lines,full production facilities,there are available catalog of products as like DC MOTOR,DC REDUCER MOTOR,DC WORM GEAR MOTOR,DC PLANETARY MOTOR,MINI PUMP,BRUSH MOTOR AND BRUSHLESS MOTOR,all items have stocks to samples.
Presently,our models have covered more than 80 countries as like Japan,UK,USA,AU,Korea….
achieved highly praise amony clients.
expecting our energy can radiate all over the world,realize to CZPT each other.

Production process

Certificates
Approved by CE,ROHS,UL and ISO 9001 system.

Exhibition Exhibition

Packaging&ShippingPackaging
generally,50pcs 1 carton,the exactly depends on the customers requests.
Payment terms Paypal,Western union,TT,moneygram,TT…30% in advance,70% balance of payment before shipment.Shipping 1)we have 20years experienced forwarder(DHL,FEDEX,UPS,TNT…) agency to shipment,so the most competitive price can be supplied if you’re prefer.2)of course,you can select what you appointed courier to shipment.

RFQ RFQ
Q1:what’s your MOQ?
A1:5pcs. Q2:what’s you lead time?A2:generally,5-7days to samples order,7-10days to batches order. Q3:what’s the rpm?A3:1000-20000rpm can be customized Q4:Can be customized to D shaft?A4:of course,you can,there are many others types as thread axis,circle axis,hexagonal axis… Q5:What’s your payment terms?A5:Paypal,TT,and western union,of course,if you’re worry about the money of security,it is better select the Alipay.
Q6:How do you make sure my money in security?
A6:Don’t worry,we have 20years production experience,and achieved high praised at home and abroad.
of course,you also can select our alipay.
CommentsComments

>>>>BACK TO HOMEPAGE

What Is a Gear Motor?

Inertial load

Applications

Size

Cost

Maintenance

China supplier 2022 high torque worm 5882WG775 200w gear 100kg-cm 100rpm 36v dc motor with encoder with high quality