Product Description
Product Description
TYCP series three-phase permanent magnet synchronous motor mounting size is completely consistent with Y and Y2 series
motors. Customers can directly purchase TYCP series synchronous motors to replace Y and Y2 series asynchronous motors.
Permanent magnet motors have the following advantages:
1. High power factor.
2. High starting torque.
3. Good performance indicators.
4. The efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.
5. When the Y series motor operates at 60% load, the efficiency decreases by 15%, the power factor decreases by 30%, and the force and energy index decreases by 40%; However, the efficiency and power factor of permanent magnet synchronous motors decrease very little. When the motor has only 20% load, its force energy index is still above 80% of full load.
6. Low temperature rise: There is no resistance loss in the rotor winding and almost no reactive current in the stator winding, resulting in low motor temperature rise.
7. Small size, light weight, and low consumables: The volume, weight, and materials used for permanent magnet synchronous motors of the same capacity can be reduced by about 30%.
8. Capable of atmospheric gap formation, facilitating the formation of new magnetic circuits.
9. The armature has a small reaction and strong overload resistance.
Product Parameters
Model | Output power (KW) |
Speed (R/min) |
Frequency (HZ) |
Rated torque (N.m) |
Rated current (A) |
Eff (%) |
Rate voltage (V) |
Weight (KGS) |
TYCP series standard speed 3000R/min | ||||||||
TYCP90S-2.2-30 | 2.2 | 3000 | 150 | 7 | 4 | 88 | 380 | 22 |
TYCP90l-3-30 | 3 | 3000 | 150 | 9.6 | 5.4 | 89.1 | 380 | 25 |
TYCP90l-4-30 | 4 | 3000 | 200 | 12.7 | 7.3 | 90 | 380 | 32 |
TYCP100l-5.5-30 | 5.5 | 3000 | 200 | 17.5 | 10 | 90.9 | 380 | 39 |
TYCP100l-7.5-30 | 7.5 | 3000 | 200 | 23.9 | 13.6 | 91.7 | 380 | 46 |
TYCP132S-11-30 | 11 | 3000 | 200 | 35 | 20 | 92.6 | 380 | 55 |
TYCP132S-15-30 | 15 | 3000 | 200 | 47.8 | 27.2 | 93.3 | 380 | 61 |
TYCP132m-18.5-30 | 18.5 | 3000 | 200 | 58.9 | 33.6 | 93.7 | 380 | 88 |
TYCP160m-22-30 | 22 | 3000 | 200 | 70 | 39.9 | 94 | 380 | 108 |
TYCP160m-30-30 | 30 | 3000 | 200 | 95.5 | 54.5 | 94.5 | 380 | 158 |
TYCP180m-37-30 | 37 | 3000 | 200 | 117.8 | 67.2 | 94.8 | 380 | 168 |
TYCP180m-45-30 | 45 | 3000 | 200 | 143.3 | 81.7 | 95 | 380 | 180 |
TYCP225S-55-30 | 55 | 3000 | 200 | 175.1 | 99.8 | 95.3 | 380 | 298 |
TYCP225S-75-30 | 75 | 3000 | 200 | 238.8 | 136.1 | 95.6 | 380 | 320 |
TYCP225m-90-30 | 90 | 3000 | 200 | 286.5 | 163.4 | 95.8 | 380 | 377 |
TYCP250m-110-30 | 110 | 3000 | 200 | 350.2 | 199.7 | 96 | 380 | 401 |
TYCP250m-132-30 | 132 | 3000 | 200 | 420.2 | 239.6 | 96.2 | 380 | 480 |
TYCP280s-160-30 | 160 | 3000 | 200 | 509.3 | 290.4 | 96.3 | 380 | 515 |
TYCP280m-200-30 | 200 | 3000 | 200 | 636.7 | 363 | 96.5 | 380 | 570 |
Model | Output power (KW) |
Speed (R/min) |
Frequency (HZ) |
Rated torque (N.m) |
Rated current (A) |
Eff (%) |
Rate voltage (V) |
Weight (KGS) |
TYCP series standard speed 1500R/min | ||||||||
TYCP90S-1.5-15 | 1.5 | 1500 | 75 | 9.6 | 2.7 | 88.2 | 380 | 21 |
TYCP90l-2.2-15 | 2.2 | 1500 | 75 | 14 | 4 | 89.5 | 380 | 25 |
TYCP100l-3-15 | 3 | 1500 | 75 | 19.1 | 5.4 | 90.4 | 380 | 29 |
TYCP100l-4-15 | 4 | 1500 | 100 | 25.5 | 7.3 | 91.1 | 380 | 36 |
TYCP112m-5.5-15 | 5.5 | 1500 | 100 | 35 | 10 | 91.9 | 380 | 42 |
TYCP132m-7.5-15 | 7.5 | 1500 | 100 | 47.8 | 13.6 | 92.6 | 380 | 58 |
TYCP132m-11-15 | 11 | 1500 | 100 | 70 | 20 | 93.3 | 380 | 63 |
TYCP160l-15-15 | 15 | 1500 | 100 | 95.5 | 26.8 | 93.9 | 380 | 114 |
TYCP160l-18.5-15 | 18.5 | 1500 | 100 | 117.8 | 33 | 94.2 | 380 | 122 |
TYCP180m-22-15 | 22 | 1500 | 100 | 140.1 | 39.3 | 94.5 | 380 | 165 |
TYCP180l-30-15 | 30 | 1500 | 100 | 191 | 53.6 | 94.9 | 380 | 190 |
TYCP225S-37-15 | 37 | 1500 | 100 | 235.6 | 66.1 | 95.2 | 380 | 290 |
TYCP225l-45-15 | 45 | 1500 | 100 | 286.6 | 80.4 | 95.4 | 380 | 325 |
TYCP225l-55-15 | 55 | 1500 | 100 | 350.2 | 98.3 | 95.7 | 380 | 367 |
TYCP250m-75-15 | 75 | 1500 | 100 | 477.5 | 134 | 96 | 380 | 440 |
TYCP250m-90-15 | 90 | 1500 | 100 | 573 | 160.8 | 96.1 | 380 | 525 |
TYCP250m-110-15 | 110 | 1500 | 100 | 700.3 | 196.5 | 96.3 | 380 | 550 |
TYCP280m-132-15 | 132 | 1500 | 100 | 840.4 | 235.8 | 96.4 | 380 | 608 |
TYCP280m-160-15 | 160 | 1500 | 100 | 1018.7 | 285.8 | 96.6 | 380 | 670 |
Model | Output power (KW) |
Speed (R/min) |
Frequency (HZ) |
Rated torque (N.m) |
Rated current (A) |
Eff (%) |
Rate voltage (V) |
Weight (KGS) |
TYCP series standard speed 3000R/min | ||||||||
TYCP90l-1.1-10 | 1.1 | 1000 | 50 | 10.5 | 2 | 84.5 | 380 | 25 |
TYCP90l-1.5-10 | 1.5 | 1000 | 50 | 14.3 | 2.7 | 85.9 | 380 | 27 |
TYCP100l-2.2-10 | 2.2 | 1000 | 50 | 21 | 4 | 87.4 | 380 | 29 |
TYCP112m-3-10 | 3 | 1000 | 66.7 | 28.7 | 5.4 | 88.6 | 380 | 41 |
TYCP132m-4-10 | 4 | 1000 | 66.7 | 38.2 | 7.3 | 89.5 | 380 | 43 |
TYCP132m-5.5-10 | 5.5 | 1000 | 66.7 | 52.5 | 10 | 90.5 | 380 | 45 |
TYCP160l-7.5-10 | 7.5 | 1000 | 66.7 | 71.6 | 13.6 | 91.3 | 380 | 99 |
TYCP160l-11-10 | 11 | 1000 | 66.7 | 105.1 | 20 | 92.3 | 380 | 108 |
TYCP180m-15-10 | 15 | 1000 | 66.7 | 143.3 | 27.2 | 92.9 | 380 | 180 |
TYCP180m-18.5-10 | 18.5 | 1000 | 66.7 | 176.7 | 33.6 | 93.4 | 380 | 187 |
TYCP225s-22-10 | 22 | 1000 | 66.7 | 210.1 | 39.9 | 93.7 | 380 | 298 |
TYCP225m-30-10 | 30 | 1000 | 66.7 | 286.5 | 54.5 | 94.2 | 380 | 305 |
TYCP225m-37-10 | 37 | 1000 | 66.7 | 353.4 | 67.2 | 94.5 | 380 | 315 |
TYCP250m-45-10 | 45 | 1000 | 66.7 | 429.8 | 81.7 | 94.8 | 380 | 379 |
TYCP250m-55-10 | 55 | 1000 | 66.7 | 525.3 | 99.8 | 95.1 | 380 | 387 |
TYCP280s-75-10 | 75 | 1000 | 66.7 | 716.3 | 136.1 | 95.4 | 380 | 520 |
Detailed Photos
Our Advantages
We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting – both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting – both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,
FAQ
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Universal, Household Appliances, Industrial, Power Tools |
---|---|
Operating Speed: | Adjust Speed |
Operation Mode: | Electric Motor |
Magnetic Structure: | Permanent Magnet |
Function: | Driving, Control |
Structure: | Rotating Pole Type (Armature Fixed) |
Samples: |
US$ 826/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
editor by CX 2024-05-09