Tag Archives: brushless dc gear motor

China Semiconductor Automation Small brushless DC Planetary Gear Motor motorbase

Item Description

Semiconductor Automation Little brushless dc Planetary Gear Motor

Principal Characteristics
one.OEM/ODM 36mm Planetary reducer plus TEC3650&3640 brushless motor
two.Tiny dimensions dc gear motor with low pace and large torque
3.36mm gear motor provide 3.0Nm torque max and far more reputable
four.Appropriate to little diameter, lower sound and large torque software
five.Reduction ratio:4,fourteen,19,27,fifty one,seventy one,100,139,189,264,369,516,720

Motor model no. Rated voltage No-load velocity No-load present Rated pace Rated torque Rated recent Output energy Stall torque Stall existing
VDC r/min mA r/min g.cm mA W g.cm A
TFC3650-2465 24 6500 200 5400 200 one thousand 11.5 1150 2.six
TFC3650-2440 24 4000 a hundred and twenty 3200 two hundred 600 six.6 a thousand two.
TFC3650-1245 twelve 4500 a hundred and fifty 3500 230 880 8.3 820 2.five

Gear motor technical information : GMP36-TEC3650-2465-xxx

Reduction ratio four 19 fifty one one hundred 139 189 264 369 516 720
Size mm 26 33.5 forty.five forty.5 forty.5 forty seven.5 forty seven.five 47.five 47.five 47.five
No-load speed rpm 1600 340 a hundred twenty five sixty five 45 33 23 seventeen twelve 9
Rated pace rpm 1300 280 one hundred 53 38 28 20 fourteen.five ten seven.five
Rated torque kg.cm .six two.7 6. twelve 16.6 22.five thirty thirty thirty 30
Max.momentary tolerance torque kg.cm 3.seven 15 35 sixty nine 70 70 70 70 70 70

Equipment motor technological info : GMP36-TEC3650-2440-xxx

Reduction ratio 4 19 fifty one 100 139 189 264 369 516 720
Length mm 26 33.5 40.five 40.5 40.five 47.five forty seven.five 47.5 47.five 47.five
No-load pace rpm 950 two hundred 75 forty 28 20 15 10 seven.five 5.5
Rated speed rpm 750 one hundred sixty 60 thirty 22 16 12 8 6 four.five
Rated torque kg.cm .6 2.seven 6. twelve sixteen.six 22.five 30 30 thirty thirty
Max.momentary tolerance torque kg.cm three.seven 15 35 sixty nine 70 70 70 70 70 70

Gear motor technological data : GMP36-TEC3650-1245-xxx

Reduction ratio four 19 fifty one a hundred 139 189 264 369 516 720
Duration mm 26 33.five forty.5 40.5 forty.five forty seven.five 47.five 47.five 47.5 forty seven.five
No-load pace rpm 1050 230 eighty five 44 32 23 seventeen twelve 9 six
Rated pace rpm 875 185 sixty eight 35 25 eighteen thirteen 10 seven 5
Rated torque kg.cm .7 3. 7. 14 19 24 30 30 thirty 30
Max.momentary tolerance torque kg.cm 2.6 11 25 fifty 68 70 70 70 70 70

Connected merchandise

Solution Software

Other Purposes:
Business Equipment: ATM, Copiers and Scanners, Currency Dealing with, Stage of Sale, Printers, Vending Devices.
Foods and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Devices, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
House Entertainment and Gaming: Gaming Machines, Movie Game titles, Optical Disk Drives, RC and Electricity Toys.
House Systems: Home Air flow, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Ground Treatment, Whirlpool and Spa, Showers, Intelligent Metering, Coffee Machines.
Garden and Yard: Garden Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personalized Care: Hair Cutting, Hair Treatment, Massagers.
Power Instruments: Drills and Motorists, Sanders, Grinders, Polishers, Saws.
Digicam and Optical: Online video, Cameras, Projectors.

 

Packing & Shipping
Packaging: solitary carton packing, one hundred parts for each box.
Delivery time:
DHL: 3-5 operating times
UPS: 5-7 functioning times
TNT: 5-7 functioning days
FedEx: 7-9 operating times
EMS: twelve-15 doing work days
China Submit: Is dependent on ship to which country
Sea: Relies upon on ship to which place

 

Our organization

TT Motor (HK) Industrial Co., Ltd. has been specializing in micro motors, gear motors and their respective parts since 2000.
Our products are widely used in entertainment systems, automobiles, home and industrial appliances and tools and many others. Our products are dependable and long-lasting, and backed by years of experience. We export 98% of our output worldwide. 
By leveraging our hard-won reputation for honesty, dependability and quality, TT aims to continue as a pioneer in the sales overseas by seeking global partners. If your company is an end-user of micro-motors, a distributor or an agent, please contact us. We look forward to being able to work together with you in the near future.
Certifications

 

FAQ

Q: How to order?
A: ship us inquiry → obtain our quotation → negotiate particulars → confirm the sample → indicator deal/deposit → mass creation → cargo completely ready → harmony/shipping and delivery → more cooperation.
Q: How about Sample get?
A: Sample is offered for you. remember to contact us for specifics. After we demand you sample payment, please truly feel simple, it would be refund when you area formal order.
Q: Which shipping and delivery way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, China Submit,Sea are accessible.The other transport techniques are also offered, remember to speak to us if you want ship by the other transport way. 
Q: How long is the produce?
A: Devliver time depends on the amount you purchase. usually it will take 15-twenty five functioning times.
Q: My package deal has missing items. What can I do?
A: Please speak to our support group and we will verify your get with the package contents.We apologize for any inconveniences. 
Q: How to confirm the payment?
A: We acknowledge payment by T/T, PayPal, the other payment techniques also could be acknowledged,You should speak to us just before you spend by the other payment techniques. Also thirty-fifty% deposit is offered, the equilibrium funds need to be paid out before transport.

US $6-43
/ Piece
| 		50 Pieces

(Min. Order)

###

Application: Industrial, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Totally Enclosed
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TFC3650-2465 24 6500 200 5400 200 1000 11.5 1150 2.6
TFC3650-2440 24 4000 120 3200 200 600 6.6 1000 2.0
TFC3650-1245 12 4500 150 3500 230 880 8.3 820 2.5

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 1600 340 125 65 45 33 23 17 12 9
Rated speed rpm 1300 280 100 53 38 28 20 14.5 10 7.5
Rated torque kg.cm 0.6 2.7 6.0 12 16.6 22.5 30 30 30 30
Max.momentary tolerance torque kg.cm 3.7 15 35 69 70 70 70 70 70 70

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 950 200 75 40 28 20 15 10 7.5 5.5
Rated speed rpm 750 160 60 30 22 16 12 8 6 4.5
Rated torque kg.cm 0.6 2.7 6.0 12 16.6 22.5 30 30 30 30
Max.momentary tolerance torque kg.cm 3.7 15 35 69 70 70 70 70 70 70

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 1050 230 85 44 32 23 17 12 9 6
Rated speed rpm 875 185 68 35 25 18 13 10 7 5
Rated torque kg.cm 0.7 3.0 7.0 14 19 24 30 30 30 30
Max.momentary tolerance torque kg.cm 2.6 11 25 50 68 70 70 70 70 70

###

Other Applications:
Business Machines: ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines.
Food and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
Home Entertainment and Gaming: Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys.
Home Technologies: Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines.
Lawn and Garden: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personal Care: Hair Cutting, Hair Care, Massagers.
Power Tools: Drills and Drivers, Sanders, Grinders, Polishers, Saws.
Camera and Optical: Video, Cameras, Projectors.
US $6-43
/ Piece
| 		50 Pieces

(Min. Order)

###

Application: Industrial, Car, Power Tools
Operating Speed: Low Speed
Excitation Mode: Permanent Magnet
Function: Totally Enclosed
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Motor model no. Rated voltage No-load speed No-load current Rated speed Rated torque Rated current Output power Stall torque Stall current
VDC r/min mA r/min g.cm mA W g.cm A
TFC3650-2465 24 6500 200 5400 200 1000 11.5 1150 2.6
TFC3650-2440 24 4000 120 3200 200 600 6.6 1000 2.0
TFC3650-1245 12 4500 150 3500 230 880 8.3 820 2.5

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 1600 340 125 65 45 33 23 17 12 9
Rated speed rpm 1300 280 100 53 38 28 20 14.5 10 7.5
Rated torque kg.cm 0.6 2.7 6.0 12 16.6 22.5 30 30 30 30
Max.momentary tolerance torque kg.cm 3.7 15 35 69 70 70 70 70 70 70

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 950 200 75 40 28 20 15 10 7.5 5.5
Rated speed rpm 750 160 60 30 22 16 12 8 6 4.5
Rated torque kg.cm 0.6 2.7 6.0 12 16.6 22.5 30 30 30 30
Max.momentary tolerance torque kg.cm 3.7 15 35 69 70 70 70 70 70 70

###

Reduction ratio 4 19 51 100 139 189 264 369 516 720
Length mm 26 33.5 40.5 40.5 40.5 47.5 47.5 47.5 47.5 47.5
No-load speed rpm 1050 230 85 44 32 23 17 12 9 6
Rated speed rpm 875 185 68 35 25 18 13 10 7 5
Rated torque kg.cm 0.7 3.0 7.0 14 19 24 30 30 30 30
Max.momentary tolerance torque kg.cm 2.6 11 25 50 68 70 70 70 70 70

###

Other Applications:
Business Machines: ATM, Copiers and Scanners, Currency Handling, Point of Sale, Printers, Vending Machines.
Food and Beverage: Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Food Processors, Juicers, Fryers, Ice Makers, Soy Bean Milk Makers.
Home Entertainment and Gaming: Gaming Machines, Video Games, Optical Disk Drives, RC and Power Toys.
Home Technologies: Home Ventilation, Air Purifiers and Dehumidifiers, Range Hoods, Washers and Dryers, Refrigerators, Dishwashers, Floor Care, Whirlpool and Spa, Showers, Smart Metering, Coffee Machines.
Lawn and Garden: Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
Personal Care: Hair Cutting, Hair Care, Massagers.
Power Tools: Drills and Drivers, Sanders, Grinders, Polishers, Saws.
Camera and Optical: Video, Cameras, Projectors.

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Semiconductor Automation Small brushless DC Planetary Gear Motor motorbaseChina Semiconductor Automation Small brushless DC Planetary Gear Motor motorbase
editor by czh 2022-12-17

China Electrical Mini Permanent Magnet Planetary Brushless DC Gear Motor with high quality

Merchandise Description

Introduction

We have equally DC equipment motor and Brushless dc equipment motor, which includes 5 types of 300 merchandise. The watt is from 6W to 300W, voltage is from 12VDC to 220VDC. The benefits of our motors are constant perform, huge starting and rated torque, reduced noise, large performance and extended lifestyle.
Specification
 

Check out Of Product

 

 

 

About Greensky Mechanical

  • Heritage:  Greensky Mechanical was launched in 2012 with buying of a fifteen calendar year old cooperative factory in ZHangZhoug Province. Greensky Electrical power brought new management principle to the new joint business and enhance the top quality of the motors as Greensky Power only offers greatest high quality and greatest services to the society. 
  • Introduce: Greensky Mechanical Co., ltd is a subsidiary business of Greensky Electrical power which is producing micro AC and DC gear motor, little AC equipment motor, precision planetary gearbox for servo motor, and it has ability to style and build the micro motor, custom-made motor and precision gearbox, motor controller with large quality.
  • Philosophy:We help save cost by increasing the performance of manufacturing and supply. “As soon as and without end” is our aim to provide consumers in the globe. After we do organization with consumer, we will do business forever.

 

Greensky’s Benefit

On the web site you can discover a selection of renewable merchandise including AC/DC motor,AC Induction Motor,Reversible Motor,Blake Motor,Velocity motor,AC Angel Motor,Gear Motor,Planetary Gear Box,Worm Equipment Box and their relevant factors.

If you have any other concerns, you should feel free of charge to contact us.

 

Product Voltage
V		 Rated Energy
W		 Rated Recent
A		 Rated Pace
RPM		 Rated Torque
N.m		 Quality Safety
IP
32BLDP2415-30S 24 fifteen .nine 3000 .047 32
32BLDP2425-30S 24 25 one.four 3000 .080 32

To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: High Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Customization:
Available

|

Customized Request

###

Model Voltage
V		 Rated Power
W		 Rated Current
A		 Rated Speed
RPM		 Rated Torque
N.m		 Grade Protection
IP
32BLDP2415-30S 24 15 0.9 3000 0.047 32
32BLDP2425-30S 24 25 1.4 3000 0.080 32
To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: High Speed
Excitation Mode: Excited
Function: Control
Casing Protection: Protection Type
Number of Poles: 4

###

Customization:
Available

|

Customized Request

###

Model Voltage
V		 Rated Power
W		 Rated Current
A		 Rated Speed
RPM		 Rated Torque
N.m		 Grade Protection
IP
32BLDP2415-30S 24 15 0.9 3000 0.047 32
32BLDP2425-30S 24 25 1.4 3000 0.080 32

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China Electrical Mini Permanent Magnet Planetary Brushless DC Gear Motor with high qualityChina Electrical Mini Permanent Magnet Planetary Brushless DC Gear Motor with high quality
editor by czh 2022-12-14

China China 1000rpm High Speed 400W Electric 48V BLDC Brushless DC Planetary Gear Motor for CNC Milling and Drilling Machine motorbase

Product Description

BG 80BL DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

 

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG 80BL01 48 220 3000 0.7 5.5 4000 1.37   2.1   16.5
BG 80BL02 310 440 6000 0.7 1.7 8000 0.4 2.1 5.1
BG 80BL03 48 400 3000 1.27 10 4000 2.5 30 30
We can also customize products according to customer requirements.

 

 Planetary Gear Motor Technical Data-BG
Ratio 3 6  10  24 36 64 96 216
NO-load speed 1333 666 250 166 111 62.5 41 18
Rated speed(rpm) 1000 500 187 125 83 46 31 13
Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70

Established in 1994, HangZhou BG Motor Factory is a professional manufacturer of brushless DC motors, brushed DC motors, planetary gear motors, worm gear motors, Universal motors and AC motors. We have a plant area of 6000 square meters, multiple patent certificates, and we have the independent design and development capabilities and strong technical force, with an annual output of more than 1 million units. Since the beginning of its establishment, BG motor has focused on the overall solution of motors. We manufacture and design motors, provide professional customized services, respond quickly to customer needs, and actively help customers to solve problems. Our motor products are exported to 20 countries, including the United States, Germany, Italy, the United Kingdom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea etc.
Our founder, Mr. Sun, has more than 40 years of experience in motor technology, and our other engineers also have more than 15 years of experience, and 60% of our staff have more than 10 years of experience, and we can assure you that the quality of our motors is top notch.
The products cover AGV, underwater robots, robots, sewing machine industry, automobiles, medical equipment, automatic doors, lifting equipment, industrial equipment and have a wide range of applications.
We strive for CZPT in the quality of each product, and we are only a small and sophisticated manufacturer.
Our vision: Drive the world forward and make life better!

Q:1.What kind of motors can you provide?

A:At present, we mainly produce brushless DC motors, brush DC motors, AC motors, Universal Motors; the power of the motor is less than 5000W, and the diameter of the motor is not more than 200mm;

Q:2.Can you send me a price list?

A:For all of our motors, they are customized based on different requirements like lifetime, noise,voltage,and shaft etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.

Q:3.Can l get some samples?

A:It depends. If only a few samples for personal use or replacement, I am afraid it’ll be difficult for us to provide because all of our motors are custom made and no stock available if there are no further needs. If just sample testing before the official order and our MOQ,price and other terms are acceptable,we’d love to provide samples.

Q4:Can you provide OEM or ODM service?

A:Yes,OEM and ODM are both available, we have the professional R&D dept which can provide professional solutions for you.

Q5:Can l visit your factory before we place an order?

A:welcome to visit our factory,wear every pleased if we have the chance to know each other more.

Q:6.What’s the lead time for a regular order?

A:For orders, the standard lead time is 15-20 days and this time can be shorter or longer based on the different model,period and quantity.

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

BG 80BL DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG 80BL01 48 220 3000 0.7 5.5 4000 1.37   2.1   16.5
BG 80BL02 310 440 6000 0.7 1.7 8000 0.4 2.1 5.1
BG 80BL03 48 400 3000 1.27 10 4000 2.5 30 30
We can also customize products according to customer requirements.

###

 Planetary Gear Motor Technical Data-BG
Ratio 3 6  10  24 36 64 96 216
NO-load speed 1333 666 250 166 111 62.5 41 18
Rated speed(rpm) 1000 500 187 125 83 46 31 13
Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70
Application: Universal, Industrial, Household Appliances, Car, Power Tools, Robot Arm
Operating Speed: Low Speed
Excitation Mode: DC
Function: Driving
Casing Protection: Closed Type
Number of Poles: Can Be Choosen

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

BG 80BL DC Brushless Motor 
Environmental Conditions -20ºC~50ºC
Insulation Clase B
Protection class IP44
Noise ≤65dB
Number of Poles/ phases 8/3
Lifespan >5000h

###

Electrical Specifications
Model RATED LOAD NO LOAD   STALL
Voltage   Power Speed Torque  Current    Speed    Current    Torque   Current 
V W rpm N.m A rpm A   N.m   A  
BG 80BL01 48 220 3000 0.7 5.5 4000 1.37   2.1   16.5
BG 80BL02 310 440 6000 0.7 1.7 8000 0.4 2.1 5.1
BG 80BL03 48 400 3000 1.27 10 4000 2.5 30 30
We can also customize products according to customer requirements.

###

 Planetary Gear Motor Technical Data-BG
Ratio 3 6  10  24 36 64 96 216
NO-load speed 1333 666 250 166 111 62.5 41 18
Rated speed(rpm) 1000 500 187 125 83 46 31 13
Rated torque(N.m) 2.7 5.4 8.5 20.4 30.6 48 70 70

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China China 1000rpm High Speed 400W Electric 48V BLDC Brushless DC Planetary Gear Motor for CNC Milling and Drilling Machine motorbaseChina China 1000rpm High Speed 400W Electric 48V BLDC Brushless DC Planetary Gear Motor for CNC Milling and Drilling Machine motorbase
editor by czh 2022-12-01

China 32mm 42mm 52mm 62mm 72mm 82mm 12V 24V 48V 10W-300W Round Flange High Torque DC Brushless or Brush DC Planetary Gear Motor with Planetary Gearbox with Good quality

Product Description

32mm 42mm 52mm 62mm 72mm 82mm 12V 24V 48V 10W-300W Round Flange High Torque DC Brushless or Brush DC Planetary Gear Motor With Planetary Gearbox

Features

1) Dimensions: 60*60mm
2) Power: 15W 20W 30W 60W 80W 100W 120W 180W 200W 400W
3) Voltage: 12V 24V 48V 90V 310V
4) Rated speed: 2000rpm, 3000rpm
5) Reduction ratio: 3~ 200K

 

Product Photos

 

Product Description

 

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft

FAQ

Q: Can you make the gear motor with customization?
A: Yes, we can customize per your request, like power, voltage, speed, shaft size, wires, connectors, IP grade, etc.

Q: Do you provide samples?
A: Yes. The sample is available for testing.

Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.

Q: What’s your lead time?
A: Standard products need 5-30days, a bit longer for customized products.

Q: Do you provide technical support?
A: Yes. Our company have design and development team, we can provide technical support if you
need.

Q: How to ship to us?
A: It is available by air, sea, or train.

Q: How to pay the money?
A: T/T and L/C are preferred, with a different currencies, including USD, EUR, RMB, etc.

Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.

Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.

Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
 

US $15-25
/ Piece
| 		1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Application: Industrial
Operating Speed: Constant Speed
Excitation Mode: Excited

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:
Available

|

Customized Request

###

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft
US $15-25
/ Piece
| 		1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Application: Industrial
Operating Speed: Constant Speed
Excitation Mode: Excited

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:
Available

|

Customized Request

###

Motor type Brush type / Brushless type / Stepper type
Frame size 16mm ~ 130mm… can be customized
Running speed Motor 1500-4000 rpm, Gear Ratio 1/3 ~ 1/3000
Output power 3W ~2200W… can be customized
Output shaft round shaft, D-cut shaft, key-way shaft, hollow shaft…
Voltage type 12V / 24V / 36V / 48V / 90V / 110V /220V… can be customized
Accessories Internal driver / External driver / Connector / Brake / Encoder…
 
Gearbox type Parallel shaft
Right angle hollow worm shaft Right angle bevel hollow shaft Flat type hollow shaft
Right angle solid worm shaft Right angle bevel solid shaft Flat type solid shaft
Planetary center shaft

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China 32mm 42mm 52mm 62mm 72mm 82mm 12V 24V 48V 10W-300W Round Flange High Torque DC Brushless or Brush DC Planetary Gear Motor with Planetary Gearbox with Good qualityChina 32mm 42mm 52mm 62mm 72mm 82mm 12V 24V 48V 10W-300W Round Flange High Torque DC Brushless or Brush DC Planetary Gear Motor with Planetary Gearbox with Good quality
editor by czh 2022-11-28

China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler

Product Description

General Specification:

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.571mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for 1 minute
Insulation resistance 100MΩ Min.,500VDC

Specification:

 

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

Drawing(unit=mm)

Detail of motor:

 

US $65
/ Piece
| 		3 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Function: Driving
Number of Poles: 4
Certification: ISO9001, CE, RoHS, ISO
Brand: Jkongmotor

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.025mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less
US $65
/ Piece
| 		3 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Function: Driving
Number of Poles: 4
Certification: ISO9001, CE, RoHS, ISO
Brand: Jkongmotor

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.025mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler
editor by czh 2022-11-24

China DC Brushless AC Motorized Pulley Conveyor Small Roller Drum Planetary Gear Motor for Material Handling Industry Airport Check-in Conveyor 50mm 60mm 113mm 138mm motor driver

Product Description

What is applications use gear motor?
Electric gear motors are used in various applications that require for high output torque and low output rotation speed.

What is gear motor?
Gear motor is combined electric motor with gear reducer box. 

Would you like to be GPG motor wholesaler,dealer,distributor,stockist?

GPG motor can improve your business.

Motorized drive roller motor is a new type of drive device,which is a conveyor drive where the motor,gear reducer and all moving parts are enclosed inside the drum.It is mainly used in fixed and movable type belt conveyor.
This roller drum motor can run under severe enviroment,such as water flow and spray,and erosion enviroment.Its protection grade is IP66.

If there are special requirement for the transmission system,such as space,low noise and high power,you can use our drum motor TMX.

The roller drum motor is widely used in the food processing,phamaceutical industry,packing machinery,aiport baggage handling system,meat processing industry,postal sorting and belt conveyor,etc.

Main benefits of belt conveyor drive roller drum motor

1.High mechanical efficiency highly reduces energy costs
2.Compact unit design enhances space utilization
3.No external moving parts increases operator safety
4.No maintenance reduces operating costs

We do also have DC brushless planetary geared roller drum motor to meet different application.
Should you any questions,please feel free to contact Ms Susan Liu directly.
Please leave message or send inquiry.I will be back to you asap.
 

Rated power 100W~5500W
Rated voltage  Single phase 110V, 220V,Three phase 220V,380V,440V
Pole Number 2P,4P,6P,8P
Drum length L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm
Drum diameter 80mm,113mm,138mm,165mm,216mm320mm,etc
Drum material carbon steel,stainless steel

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 299/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Rated power 100W~5500W
Rated voltage  Single phase 110V, 220V,Three phase 220V,380V,440V
Pole Number 2P,4P,6P,8P
Drum length L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm
Drum diameter 80mm,113mm,138mm,165mm,216mm320mm,etc
Drum material carbon steel,stainless steel
To Be Negotiated 1 Piece
(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Protection Type
Number of Poles: 4

###

Samples:
US$ 299/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Rated power 100W~5500W
Rated voltage  Single phase 110V, 220V,Three phase 220V,380V,440V
Pole Number 2P,4P,6P,8P
Drum length L≤850mm, 850mm < L≤1050mm,1050mm < L≤1250mm
Drum diameter 80mm,113mm,138mm,165mm,216mm320mm,etc
Drum material carbon steel,stainless steel

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China DC Brushless AC Motorized Pulley Conveyor Small Roller Drum Planetary Gear Motor for Material Handling Industry Airport Check-in Conveyor 50mm 60mm 113mm 138mm motor driver China DC Brushless AC Motorized Pulley Conveyor Small Roller Drum Planetary Gear Motor for Material Handling Industry Airport Check-in Conveyor 50mm 60mm 113mm 138mm motor driver
editor by czh 2022-11-24

China Hot selling 48MM 3500RPM 300W 12V DC Gear Motor BLDC 110kg.cm Large Torque Brushless Motor Supplier OEM Planetary Gearmotor motor driver

Warranty: 1 calendar year
Model Quantity: 4825-gear 12V/
Utilization: Automobile, Home Appliance, Beauty instrument, Wise Home, Electrical equipment, Yard Device Electricity Drill
Kind: Electric hammer motor
Torque: 1.1Nm Rated
Building: Everlasting Magnet
Commutation: Brushless
Safeguard Function: Completely Enclosed
Speed(RPM): 3500rpm
Continuous Recent(A): 20A rated
Effectiveness: IE one
Item name: Brushless Gearmotor
Materials: Iron, copper, carbon
Interaction: Brushless
Stator Measurement(mm): forty eight*twenty five
Voltage: 12V 16V 18V 24V
Certificate: CE Rohs ISO
Velocity: 3500RPM-17500RPM
Series:
Personalize: Equipment Motor Corridor Sensor Controller
Packaging Details: blister+paper box+pallet
Port: HangZhou/ZheJiang

Merchandise Description

Item identifyBrushless Gearmotor
Materialiron, copper, carbon
Shade as image
Delivery time quantity
Dimension(mm) Φ48*twenty five
OEM/ODM customization services provided
V Rated Voltage12
rpm Rated Speed diminished3500
mNm Rated torque1.1Nm
A Rated recent20
W Rated electricity278.nine
Motor rpm Noload speed17500
A Noload current3.5
mNm Locked-rotor torque1.9Nm
A Locked-rotor recent120.36
% Performance77.5
Merchandise Show Business Profile ZHangZhoug Chuanghong Intelligent Technological innovation Co.,LtdZHangZhoug Chuanghong Smart Technology Co., Xihu (West Lake) Dis. NMRV 110 Worm Gearbox Ltd established in 1996, is a skilled manufacturer of PMDC motors and Brushless motors, incorporating s and generation. With an once-a-year output of far more than 15 million mctefnits, the company is 1 of the greatest makers of DC motors in the YangtRiver Delta location, covering a plant developing area of fifteen,000 square meters. Our merchandise are widely applied in industries these kinds of as electrical power tools, home appliances, automobiles, healthcare tools, sports activities tools, business office gear, unique equipment and individual care. All items comply with EU ROHS and Achieve requirements and promote effectively in much more than 50 nations around the world and areas and the domestic industry. We are experienced suppliers for world-renowned enterprises like Bosch, Mini trencher with seven-hundred mm trench depth for agricultural makes use of TTI, Panasonic. The company adheres to the organization philosophy of “Pursuit of excellence, Service-oriented”, and strictly follows isO9001: 2008 high quality standards, and adopts the innovative “lean generation design and word’s major German SAP “Sensible Cloud System” ERP system . Payment&Shipping and delivery FAQ A) How could I get a sample?Before we obtained the initial order, Motovario Like double worm gear speed reducer NMRV Worm gearbox you should pay for the sample price and convey price. We will return the sample value again to you in your 1st order.B) Sample time?Existing products: In fifteen times.C) Regardless of whether you could make our brand name on your goods?Indeed. We can print your Brand on both the products and the packages if you can fulfill our MOQ.D) Whether or not you could make your items by our coloration?Sorry , we can not.E) How to guarantee the good quality of your goods?1) Rigorous detection for the duration of creation.2) Strict sampling inspection on merchandise before cargo and intact solution packaging ensured. Again House

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China Hot selling 48MM 3500RPM 300W 12V DC Gear Motor BLDC 110kg.cm Large Torque Brushless Motor Supplier OEM Planetary Gearmotor motor driver

China China Brushless Mini Plastic DC Gear Motor TGP01D-A130 For Toy Car

TGP01D-A130 TGP01S-A130 TGP02D-A130 TGP02S-A130

Brushless Mini Plastic DC Equipment Motor TGP01D-A130 For Toy Car

Figures of Mini Plastic DC Gear Motor

  • Voltage: 3v 6v
  • Reduction Ratio: 1/40 8,,1/120,1/100 and 80,1/220,1/256,1/288
  • Dize:60 4.2 X 22.5 X 18.8mm,60 4.2mm length micro motor
  • The double facet
  • can match with wheels, foremost wires, and battery boxes
  • Samples can be sent very first. The shipping time is fifteen-20 days

Gear motor dimension (mm)

 

Customization Provider of Mini Plastic DC Gear Motor

See what else personalized services we can offer to you?

 

one. gear 2. shaft 3. rear shaft 4. encoder 5. water-resistant

Observe: All these customization companies is not going to lead to new tooling expenses, just can have our equipment motors fit your design and style demands properly
1. Gear kind: Helical, worm, spur,

Material: powder, copper, machined, plastic. all gears are created by our engineers
2. Shaft： hole on the shaft, sq. shaft, screw shaft…
3. Rear shaft: for encoder mounting or another part you want to mount
4. Encoder: hall sensor encoder
5. Water-proof: shield motor well
6. yet another customization request if you require

Other Plastic Simple dc toy motor

What is a DC motor?

DC motor is a variety of motor that converts electrical strength into mechanical energy. DC motor obtains electrical power by means of DC and converts this power into mechanical rotation.
The DC motor utilizes the magnetic field generated by the produced present to supply energy for the movement of the rotor set in the output shaft. The output torque and pace rely on the electrical enter and the layout of the motor.

How do DC Motors work?

The phrase ‘DC motor’ is utilized to refer to any rotary electrical device that converts immediate existing electrical vitality into mechanical vitality. DC motors can vary in dimensions and power from tiny motors in toys and appliances to huge mechanisms that power vehicles, pull elevators and hoists, and generate steel rolling mills. But how do DC Motors operate?

DC motors include 2 essential elements: a stator and an armature. The stator is the stationary element of a motor, whilst the armature rotates. In a DC motor, the stator gives a rotating magnetic field that drives the armature to rotate.

A straightforward DC motor employs a stationary set of magnets in the stator, and a coil of wire with a existing working by way of it to create an electromagnetic subject aligned with the centre of the coil. 1 or a lot more windings of insulated wire are wrapped around the core of the motor to concentrate the magnetic field.

The windings of insulated wire are related to a commutator (a rotary electrical swap), that applies an electrical present to the windings. The commutator permits every single armature coil to be energized in change, creating a steady rotating pressure (known as torque).

When the coils are turned on and off in sequence, a rotating magnetic field is produced that interacts with the different fields of the stationary magnets in the stator to create torque, which brings about it to rotate. These important running rules of DC motors allow them to convert the electrical power from direct present into mechanical vitality by means of the rotating movement, which can then be used for the propulsion of objects.

Added data

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing 1 for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has 2 circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have 3 main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we 10d to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as 6 millimeters in diameter. Unlike their larger counterparts, they have only 1 gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as 1 or 2 arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right 1 for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using 2 planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of 3 large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and 2 or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt