Tag Archives: reducer

China Good Price NEMA 8/NEMA 11/NEMA 17/NEMA 23 Planetary Gear Reducer Geared Stepper Motor motor efficiency

Solution Description

 

Item Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Application:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc
 

Solution Parameters

Planetary Gear Box Specification:

Housing Substance Steel
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) ≤0.06mm
Axial Perform of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

42HS Hybrid Stepping Motor Specs:
 

Model No. Step Angle Motor Size(L1) Rated Present Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Section /Section /Stage
Solitary Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.eight 34 two.93 1.33 2.2 three.five 270 four thirty .22 ≤1:369
42HSC4409 1.8 forty 2.five one.five one.sixty five 3.3 380 four 40 .three ≤1:369

 

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio three.71 5.eighteen 14 19 27 fifty one 71 one hundred 139 189 264 369
Complete Height(L1+L2) (mm) sixty five.5 65.5 seventy six.one seventy six.one 76.one 86.five 86.5 86.5 86.five ninety six.9 96.nine ninety six.nine
Output torque ( mN.m) 902 1259 3062 4155 5000 ten thousand ten thousand 10000 ten thousand 10000 10000 10000
Whole Bodyweight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Variety of gear trains 1 2 3 4
Reducer Size(L2)   (mm) 31.five 42.one 52.five 62.nine
Performance 90% 81% 73% 66%

 

42HSC4409 Planetary Gearbox Requirements:
Reduction ratio 3.seventy one 5.18 fourteen 19 27 51 seventy one 100 139 189 264 369
Total Height(L1+L2) (mm) seventy one.five 71.5 82.one 82.one eighty two.one ninety two.five ninety two.five ninety two.5 92.5 102.9 102.nine 102.nine
Output torque ( mN.m) 1269 1772 4309 5000 5000 ten thousand ten thousand ten thousand 10000 ten thousand 10000 10000
Overall Bodyweight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Quantity of gear trains 1 2 3 4
Reducer Size(L2)   (mm) 31.5 42.1 52.five 62.nine
Performance 90% 81% 73% 66%

 

Detailed Photographs

 

Parameters of Drawing

Company Profile

ZheJiang UMot Technology Co., Ltd. specializes in R&D and sales of stepper motors, servo motors, linear modules and relevant movement control products, customizing and creating high-high quality motor goods for users with specific requirements all around the planet, and supplying general solutions for motion control techniques. Goods are exported to a lot more than thirty countries and locations including the United States, Germany, France, Italy, Russia, and Switzerland. The firm’s major products and method layout have been commonly utilized in automation manage, precision devices, health-related tools, intelligent house, 3D printing and many other fields.
Our organization has been identified as a higher-tech enterprise by related departments, has a total quality administration technique, has received ISO9001, CE, RoHs and other relevant certifications, and holds a variety of electrical patent certificates. “Concentration, Professionalism, Concentration” in the area of automation of motor R&D and technique manage answers is the firm’s organization goal. “Be your most dependable associate” is the company’s service philosophy. We have always been aiming to “make very first-course goods with skilled technology”, maintain speed with the occasions, innovate continuously, and give more end users with far better merchandise and services.

FAQ

1. Shipping and delivery strategy:
1)Intercontinental Express shipping and delivery DHL&FEDEX &UPS&TNT& 7-10days
two)Shipping and delivery by air 7-10 times
3)shipping by sea, shipping and delivery time is dependent on the destination port.

two. Specialized Help:
We can provide you with specialist specialized assistance. And our products good quality promise is 6 months. Also, we take products tailored.

three. Why need to you buy from us, not from other suppliers?
Skilled 1-to-1 motor customized. The world’s massive enterprise of decision for large-good quality suppliers. ISO9001:2008 high quality management method certification, by way of the CE, ROHS certification.

four. How to decide on types?
Just before buying, you should speak to us to verify product No. and specs to avoid any misunderstanding.

5. Are you a factory?
Yes, we are a factory, and we create stepper motor/driver, Servo motor/driver.

 

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) ≤0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 ≤1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 ≤1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%
Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) ≤0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage≤1°,2stage≤1.2°,3stage≤1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 ≤1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 ≤1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China Good Price NEMA 8/NEMA 11/NEMA 17/NEMA 23 Planetary Gear Reducer Geared Stepper Motor motor efficiencyChina Good Price NEMA 8/NEMA 11/NEMA 17/NEMA 23 Planetary Gear Reducer Geared Stepper Motor motor efficiency
editor by czh 2022-12-22

China NEMA 8 Gear Reducer Geared Stepper Motor with Planetary Gearbox car motor

Product Description

NEMA 8 Gear Reducer Geared Stepper Motor with Planetary Gearbox Specifications:

 

About CZPT Company
HangZhou CZPT Co. Ltd is a manufacturer and exporter of virious of motors, 
Our Product range are: 
DC Brush motor: 6-130mm diameter, 0.1-1500W output power. 
Brushless DC Motor: 28-110mm, 5-800W output power 
DC Spur Gear Motor: 12-110mm diameter, 0.1-300W output power 
DC Planeary Gear Motor: 10-82mm diameter, 0.1-200W output power 
Stepper Motor: NEMA 08 to NEMA 43, Can contact with gearox and lead screw
AC Gear Motor: 42 to 104mm diameter, 6-200 output power 

Compare with other competitors, Our advantages are: 

1) High Quality Guarantee: 11 years experiences in this field makes us have mature manufacturing process, Most of motors have CE, RoHS certificates.
2) Experience: Till Augest, 2016, We had export our goods to 77 different countries like US, Germany, UK, Japan, Brizal,Russia and so on.
3) Competitive Price: We have a very high competitive ability of the list prices based on low cost labour force in China. 
4) Good Service: CZPT sales are professional and with good attitude, We will response with our customer within 24 hours(Holiday excepted), So you don’t need way about can’t not find the person when have agent things. 

  • 5 MOQ: Small Orders Accepted
    6) On Time Delivery: 7-15 working days lead time for normal motors, Custmoized motor lead time are also less than 20 working days.
    7) Customized service: Our experienced R&D team can support customized motor if necessary.

 Production Equipment:

Customer Visit and Fair 

Certificates 

FAQ(Q=Question, A=Answer)

Q: What’s your main products?
A:We currently produce Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q:How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed life time and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have customized service for your standard motors?
A:Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q:Do you have individual design service for motors?
A:Yes, we would like to design motors individually for our customers, but it may need some CZPT charge and design charge. 

Q:Can I have samples for testing first?
A:Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.

Q:How do you make sure motor quality?
A:We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.

Q:What’s your lead time?
A:Generally speaking, our regular standard product will need 25-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depends on the specific orders

Q:What’s your payment term?
A:For all our new customers, we will need 40% deposite, 60% paid before shipment.

Q:When will you reply after got my inquiries?
A:We will response within 24 hours once get your inquires.

Q:How can I trust you to make sure my money is safe?
A:We are certified by the third party SGS and we have exported to over 85 countries up to June.2017. You can check our reputation with our current customers in your country (if our customers do not mind), or you can order via alibaba to get trade assurance from alibaba to make sure your money is safe.

Q:What’s the minimum order quantity?
A:Our minimum order quantity depends on different motor models, please email us to check. Also, we usually do not accept personal use motor orders. 

Q:What’s your shipping method for motors?
A:For samples and packages less than 100kg, we usually suggest express shipping; For heavy packages, we usually suggest air shipping or sea shipping. But it all depends on our customers’ needs.

Q:What certifications do you have?
A:We currently have CE and ROSH certifications.

Q:Can you send me your price list?
A:Since we have hundreds of different products, and price varies per different specifications, we are not CZPT to offer a price list. But we can quote within 24 hours once got your inquirues to make sure you can get the price in time.

Q:Can I visit your company?
A:Yes, welcome to visit our company, but please let us know at least 2 weeks in advance to help us make sure no other meetings during the day you visit us. Thanks!

Weclome contact with us if have any questions about this motor or other products!

Application: Printing Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Type: Electromechanical

###

Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

Application: Printing Equipment
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Driving
Type: Electromechanical

###

Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China NEMA 8 Gear Reducer Geared Stepper Motor with Planetary Gearbox car motor China NEMA 8 Gear Reducer Geared Stepper Motor with Planetary Gearbox car motor
editor by czh 2022-11-30

China Worm Gear Box Assembly Gearbox Wheel Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Steering Gear Drive Motor Speed Nmrv Good Quantity Durable ac motor

Product Description

Worm gearbox speed reducer  electric motor dc are on sale with high quality for you

SMRV 571-150 worm gear box with flange and electric motor
SMRV+NMRV Double Stage Arrangement Reduction Gear Box
RV Series Worm Gearbox
worm speed reducer
nmrv worm gear motor

You can choose the 1 type that you need form these product introction.
If you have any question,please contact me.
HangZhou Sihai Machinery Co.,ltd is a company specialized in research, manufacture and service of speed gearbox. Ever since establishment, we have been persisting in technical innovation, advancing the techonology to our products while maintaining our strict quality controls. It is the reason that our products branding ”Xihu (West Lake) Dis.n” have enjoyed such successful global sales.
At present, our company mainly supplies 5 series products as RV worm gearbox, UDL series speed variator,PC series helical gear unit,G3 helical geared motor and SRC helical gearbox. The products are widely applied in the mechanical equipment field such as food and beverage,cement,package,chemical and dyeing, rubber and plastic, CNC machine tool,etc.
Our products have been processed ISO 9001 Quality System Certification and exported to Italy,Spain,Britain,Poland,Turkey.The USA and other European countries,earn the good reputation with our outstanding quality and service. 
Customers first,customers satisfaction, excellent after sale service and incessant innovation are our tenet and motto. We will go all out to provide all the customers with high quality and service.

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

To Be Negotiated 1 Piece
(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Single-Step

###

Customization:
Available

|

Customized Request

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China Worm Gear Box Assembly Gearbox Wheel Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Steering Gear Drive Motor Speed Nmrv Good Quantity Durable ac motor China Worm Gear Box Assembly Gearbox Wheel Speed Reducer Jack Worm Agricultural Planetary Helical Bevel Steering Gear Drive Motor Speed Nmrv Good Quantity Durable ac motor
editor by czh 2022-11-25

China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler

Product Description

General Specification:

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.571mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for 1 minute
Insulation resistance 100MΩ Min.,500VDC

Specification:

 

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

Drawing(unit=mm)

Detail of motor:

 

US $65
/ Piece
| 		3 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Function: Driving
Number of Poles: 4
Certification: ISO9001, CE, RoHS, ISO
Brand: Jkongmotor

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.025mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less
US $65
/ Piece
| 		3 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Function: Driving
Number of Poles: 4
Certification: ISO9001, CE, RoHS, ISO
Brand: Jkongmotor

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

###

 
Item Specification
 Winding type Star
 Hall effect angle 120 degree electrical angle
 Shaft run out 0.025mm
 Radial play 0.02mm@450g
End play 0.08mm@450g
 Max.radial force 75N @20mm form the flange
 Max.axial force 15N
Insulation class Class B
Dielectric strength 500VDC for one minute
Insulation resistance 100MΩ Min.,500VDC

###

Specification Unit JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
 Number Of Poles Poles 4
 Rated Voltage VDC 36
 Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
 Rated Current Amps 1.2 2 3.6 5.3 6.8
 Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm 30 75 119 173 230
Body Length mm 37 47 67 87 107
 Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or less (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas,
 no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler China 57mm High Torque Brushless DC Planetary Gear Motor with Electric Brake Gear Reducer BLDC Motor wholesaler
editor by czh 2022-11-24

China Gear ratio 5-10 small three phase AC motor CH 1/4hp 0.2KW reducer motor with brake supplier

Model Number: CH/CV
Type: Asynchronous Motor
Frequency: 50HZ/60HZ
Phase: Three-phase
Protect Feature: Drip-proof
AC Voltage: 208-230 / 240 V
Efficiency: IE 2
Certification: CCC, ce
Product Name: CH/CV Series Gear Reducer Motor
Voltage: 110V/220V/240V/380V/415V
Mounting: Vertical and horizontal
Poles: 4P/6P
Housing: Cast or Aluminium
Torque: 2.2-51.8N.m
Duty: Continuous
Protection class: IP54/IP20
Power: 100w-3700w
Ratio: 3-200

CH/CV GEAR REDUCTION MOTOR Gear reducer motor refers to the composition of gear reducer and motor (motor), CH/CV gear reducer motor refers tohorizontal/vertical motor reducer. The product adopts a series and modular design idea, which has a wide range of adaptability and can meet the needs of the majorityof customers.
CH Horizontal Gear Motor. CH Horizontal Gear Motor.

Protection IP54 with alum alloy terminal box,and other is IP20
Frame Material Alum alloy for 100w-2200w,Alum alloy for 1#，2#，3#，4#,Gear case,5#, 6#Cast Iron for others
Duty Continuous running
INS.Class B or F/ Option
Voltage 3-pahse: 220-240/380-415V. 50HZ/60HZ1-phase:110V/50HZ/60Z, 220V/50HZ/60HZ
Pole 4P(6P)

CV Vertical Gear Motor CV Vertical Gear Motor HIGH QUALITY OUTPUT SHAFTNew standard axle, multi-precision machining, through rigorous dynamic and static balance test, to ensure low noise and smoothoperation of reducer THE COPPER COILSThe coil adopts the new national standard copper wire to ensure the high efficiency, stability and safe operation of the motor. CH CV Gear Motor Model Description CH Series Gear Motor Size CV Series Gear Motor Size CH CV Gear Motor Technical Data CH CV Gear Motor Wiring Diagram Our Company HangZhou YINXIN ELECTROMECHANICAL EQUIPMENT SUPPLY STATIONOur company is located in the city of HangZhou, ZheJiang Province of China. We handle the products of power transmission, our lines mainly cover series products in speed reducers, gearboxes , associated electricial motors and other power transmission accessories. Based on the versatile functions, our products can be utilized in many fields: machines of waste water treatment, dredgers, chemical industry, cranes, metal working mills, conveyors, paper industry, cement industry, cableways and so on.With the excellent quality and reasonable price , our products enjoy a good reputation from customers and the peers all over the world. Furthermore, the R&D investment are annually increasing for the purpose of better meeting the new demands of our customers and adapting the new tendency of the industry.Depending on the principles of honestly operating and mutual benefit, We sincerely look forward to cooperating with you.
Application area Packing&Transportion PACKING AND TRANSPORTION●Packaging: In order to ensure the integrity of product appearance, we will choose cartons, wooden pallets and wooden pallets according to customer needs.
●Delivery time: Each reducer is manufactured and tested in accordance with strict and fixed procedures to ensure that the quality is correct before leaving the factory and delivery on time.●Transportation mode: We will choose the most suitable mode of transportation for our customers according to the weight and size of the goods. We can also choose the mode of transportation according to the needs of our customers.●Receiving and after-sales service: After receiving the goods, please check whether they are in good condition. We will provide customers with perfect after-sales service.
FAQQ1: Are you a trading company or a manufacturer ?A: We are a manufacturer in ZheJiang Province, China. Our company owns the ability of manufacturing, processing,designing and R&D. We welcome your visit.
Q2: How we select models and specifications?A: According to the specific details of the demands from the part of enquiry, we will recommend the products’ models upon synthesizing the factors of field of products usage, power, torque arm and ratio…
Q3: How is your price? Can you offer any discount?A: Our prices are always competitive. If the customer can place a large order, we surely will allow discount.
Q4: How long should I wait for the feedback after I send the enquiry?A4: We will reply the enquiries without any delay, 12 hours at most.
Q5: What is your product warranty period?A: We have the certifications of ISO99001,CE, SGS.
Q6: What industries are your gearboxes being used?A: Our gearboxes are widely applied to metallurgical equipment, mining equipment, automation equipment, food machinery, packaging equipment, tobacco equipment and so on.

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.
Motor

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.
Motor

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.
Motor

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

China Gear ratio 5-10 small three phase AC motor CH 1/4hp 0.2KW reducer motor with brake supplier China Gear ratio 5-10 small three phase AC motor CH 1/4hp 0.2KW reducer motor with brake supplier
editor by czh

China 3 Phase 220V AC Motors Worm Gearbox Motor Reducer with Induction Motor 1400rpm motor efficiency

Warranty: 1 year
Model Number: MS-90s-4
Type: Asynchronous Motor, Basic, braking, QABP, QABP and braking
Frequency: 50hz,60hz, or 50hz/60hz
Phase: Three-phase
Protect Feature: Totally Enclosed
AC Voltage: 200v-720v
Efficiency: IE 2
Speed: Constant Speed
Usage: Universal
IM: B3, B35, B5
Duty: S1
Function: Driving
Housing: AL
Accessory: Rain cover, Over-Heat Protection, encoder
Production level: IP54/IP55
Certification: CE
Packaging Details: Carton box or wooden base, according to your requirements
Port: ZheJiang or HangZhou

3 Phase 220V AC Motors Worm Gearbox Motor Reducer with Induction Motor 1400rpm

The Useage of motor is very convenient and has the ability of self-starting, acclerating, braking, reversing and stoppng, can meet various operation requirements. Wthen the motor woking, has high efficency, wwithout dust and smell, no pollution and noise. Becase of its more advantages, the motor are widely used in industry, agricultural production, transportation as well as household appliances, medical electrical qpuipment etc.

Type
MS series Three Phase Electric Motor
1, Frame Size:
63-160L
2, Rated Output:
0.12-15kw
3, Rated Voltage:
380 V or to be your request
4, Rated Frequency:
50 Hz / 60 Hz
5, Poles:
4
6, Speed:
1400r/min
7, Ambient Temperature:
-15°C < θ < 40°C
8.Insulation class
F
9, Mounting:
B3; B35; B14; B5
10 OEM:
Special motors can be designed
11, Protection Class
IP55
12, Cooling Method:
ICO 141 Standards
13. Working efficiency
56%-94%
14. Matched engine
Speed reducer
15, Packing:
Strong carton or wooden base

No.
Description
No.
Description
No.
Description
1
shaft sleeve
11
rubber blanket
21
snap ring
2
thrower
12
wiring board
22
fan cowl
3
bolt
13
terminal box base
23
nameplate
4
spring cushion
14
rubber blanket
24
rivet
5
end cap
15
terminal box cap
25
B5frame
6
bearing
16
bolt
26
B5flange
7
spindle
17
cable gland
27
B14flange
8
rotor
18
corrugated gasket
28
seal ring
9
stator winding
19
bolt
29
key
10
stator
20
fan

Packaging & Shipping

Production Flow

Equipment
Our Services(1) With excellent quality and Reasonable price
(2) Promise to delivery on time
(3) Safe, reliable, economical and durable
(4) Stable transmission, quiet operation
(5) High heat-radiating efficiency, high carrying ability
(6) Every product must be tested before sending

Company Information

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 3 Phase 220V AC Motors Worm Gearbox Motor Reducer with Induction Motor 1400rpm motor efficiencyChina 3 Phase 220V AC Motors Worm Gearbox Motor Reducer with Induction Motor 1400rpm motor efficiency
editor by czh

China best A6438-520 12V DC Mini Motor With Flat Reducer with Great quality

Model Number: 6438-520
Usage: BOAT, Car, Electric Bicycle, FAN, Home Appliance, Smart Equipment
Type: Micro Motor
Torque: Requests
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): Requirement
Continuous Current(A): 0.035A
Efficiency: IE 2
Product Name: 12V dc mini motor with gear box
factory property: professional manufacturer
Motor type: Permanent Motor
Keywords: DC motor with gear box
Application: smart devices
product brand: ASLONG
warranty period: 1 year
Product Character: low voltage , Eccentricity axis
our advantages: 14 manufacturing experience
quality policy: life long warranty
Certification: ce, RoHS, FCC
Packaging Details: BUBBLE+CARTON

A6438-520 12V DC Mini DC motor With Reductor

DC Gear Motor Description
1.Standard Operating Conditions:1-1 Rated Voltage:12VDC constant between motor terminals1-2 Direction of Rotation: CW when viewed from output shaft side1-3 Operating Temperature and HumidityTemperature range of -10℃~+50℃, Humidity range of 30%~80% temperature range of -10℃~+50℃1-4 Storage TemperatureTemperature range of -20℃~+60℃2.Measuring Conditions:2-1 Motor Position:To be place t horizontally when measuring2-2 Power Supply: Regulated DC power supply2-3 Environmental Temperature and Humidity: Temperature range of 15℃ to 30℃ Relative humidity 30%and 70%2-4Power Supply: Regulated DC power supply –No load speed: 95rpm 2-5 Application:–Robotics, Small Appliance, Fanner, Electric Curtain; –Medical Pump, Surgery Tools, Medical Stirrer, centrifugal Machine; Electric Valve, Actuator, medical device2-6 Character:–Electric motor,low noise,low current and no spark. –High quantity ,small body

DC motor parameters:

Above technical data is tested by our engineer for customer reference , and OEM service can be offered .
Welcome to visit our factory at any time !

DC Motor Inventory informationMore than 1000pcs Products in factory store , short leading time ,as follow :

Model:A6348-520 gear box motor
Voltage:12V
No-load OutputSpeed:95Rpm

DC Motor Related Products

do you want to know other related product , pls click here
Company Information

Advantages:1. Company Advantage:A. Our company is a large-scale professional manufacturer deeply trusted by domestic and overseas customers, integrating development, production, wholesales and service.B. To ensure high-quality and best service ,kingly built up professional teams engaged in research,product engineering and sales.C. We have 10 years experience in the design of the research and development, With strong technology developing ability and manufacturing capability, advanced equipment2. Product Advantage: A. Variety of products,quality guaranteed, products are widely usedB. Advanced product testing equipmentC. Product flexibility, customize according to the requirements of the clients any specialdevelop all kinds of molds, Independent research and development since the open mold productsD. Products through a variety of certification(CE,RoHs,ISO,CCC,UL….)E. Some products have patent certificate3. Main product advantage A . Specifications can be tailoer-made according to customer’s requirements.B. Can provide free samplesC. Product quality is guaranteed, a short period of delivery

packing & shipping

Contate Us

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China best A6438-520 12V DC Mini Motor With Flat Reducer with Great qualityChina best A6438-520 12V DC Mini Motor With Flat Reducer with Great quality

in Leon de los Aldamas Mexico sales price shop near me near me shop factory supplier Devo High Quality Xld Vertical Cycloidal Drive Gearbox Bld Electric Motor Mixing Reducer manufacturer best Cost Custom Cheap wholesaler

in Leon de los Aldamas Mexico sales price shop near me near me shop factory supplier Devo High Quality Xld Vertical Cycloidal Drive Gearbox Bld Electric Motor Mixing Reducer manufacturer best Cost Custom Cheap wholesaler

We can offer a entire-range of electrical power transmission merchandise like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. specialize in electricity transmission items, CATV items, mechanical seal, hydraulic and Pheumatic, and promotional goods. we have attained the believe in of consumers throughout the world.

Rated Enter EPT of Cycloidal EPT for Solitary-phase EPT

Stand no period EPT Ratio
11 17 23 29 35 43 fifty nine 71 87
X2
B0		 period75
period55		 period55 period37
period25
X3
B1		 two period2
1 period5		 1 period5
1 period1		 one period1
period75		 period55
X4
B2		 four
three		 two period2
one period5		 1 period5
1 period1		 1 period1
period75		 period75
X5
B3		 seven period5
5 period5		 five period5
4		 four
three		 three
two period2		 two period2
one period5		 1 period5
X6
B4		 eleven
7 period5		 seven period5
five period5		 5 period5
4		 four
three		 three
two period2		 two period2
X7 15
eleven		 11
7 period5		 7 period5
five period5		 five period5
4		 four
X8
B5		 eighteen period5
15		 fifteen
eleven		 11
7 period5		 7 period5
five period5		 5 period5
X9
B6		 22
eighteen period5		 18 period5
15		 15
11		 11

Feature colon

Large velocity ratio and large effectiveness of solitary phase EPT comma can obtain one colon87 reduction ratio comma the efficiency of a lot more than ninety percnt comma if the use of multi-phase EPT comma reduction ratio is bigger interval
Compact structure and little quantity because of to the adoption of planetary EPT principle comma the input shaft output shaft in the same aXiHu (West Lake) Dis.s line comma so that its model to get the smallest achievable measurement period
Clean running noise low cycloidal needle enamel meshing tooth variety comma overlap coefficient is massive and has the system of components balance comma vibration and noise limit in the bare minimum diploma time period
The use of reliable comma EPT lifestyle simply because the principal areas of the high carbon chromium metal material comma following quenching therapy lparHRC58 ~ 62 rpar to acquire high energy comma and comma portion of the EPT get in touch with making use of rolling friction comma so EPT lifestyle time period

Software spot

Cycloid EPT EPT utilizes cycloid tooth meshing comma planetary EPT principle comma so it is normally called planetary cycloid EPT period
Planetary cycloid pin-wheel EPT can be widely employed in petroleum comma environmental security comma chemical business comma cement comma transportation comma textile comma pharmaceutical comma foods comma printing comma lifting comma mining comma metallurgy comma design comma EPT generation and other EPT comma as a driving or decelerating unit comma the EPT is divided into horizontal comma vertical comma biaXiHu (West Lake) Dis.al and direct assembly manner interval
Its EPT sleek framework in several circumstances can exchange the ordinary cylindrical EPT EPT and worm EPT EPT comma as a result comma planetary cycloid EPT EPT is extensively utilized in different EPT and fields comma by the greater part of customers are EPTly welcomed time period

Characteristics of transportation and EPT

Limited shipping and delivery period commato make sure well timed shipping time period
TigEPT EPT commato guarantee the goods are not ruined in the course of transportation period
Numerous modes of transportation commato make certain safe and well timed transportation
Adhere to up the EPT process of order commato make sure product shipping and delivery to consumers time period
EPT shelf life comma to make sure client expertise interval

FAQ

Q1 colon Are you a buying and selling organization or a manufacturer quest
A colon We are a manufacturer in EPTngsu Province comma EPT period of time Our business owns the potential of manufacturing comma processing comma creating and R ampD interval We welcome your go to time period

Q2 colon How we select versions and specs quest
A colon According to the particular specifics of the calls for from the part of enquiry comma we will advocate the merchandise apos designs upon synthesizing the elements of area of products utilization comma EPT comma torque arm and ratio period time period time period

Q3 colon How is your price quest Can you provide any low cost quest
A colon Our charges are alwaEPTcompetitive interval If the client can location a big order comma we certainly will allow discount period of time

This fall colon How EPT ought to I hold out for the feedback soon after I deliver the enquiry quest
A colon We will reply the enquiries with no any hold off comma twelve hrs at most interval

Q5 colon What is your item guarantee period of time quest
A colon We have the certifications of ISO99001 commaCE comma

Q6 colon What EPT are your EPTes getting employed quest
A colon Our EPTes are extensively utilized to metallurgical gear comma mining tools comma EPT equipment comma foods EPTry comma EPT products comma tobacco products and so on time period

in Leon de los Aldamas Mexico sales price shop near me near me shop factory supplier Devo High Quality Xld Vertical Cycloidal Drive Gearbox Bld Electric Motor Mixing Reducer manufacturer best Cost Custom Cheap wholesaler

in Leon de los Aldamas Mexico sales price shop near me near me shop factory supplier Devo High Quality Xld Vertical Cycloidal Drive Gearbox Bld Electric Motor Mixing Reducer manufacturer best Cost Custom Cheap wholesaler

in Qom Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Foot Mounted Planetary Reducer Gearbox manufacturer best Cost Custom Cheap wholesaler

in Qom Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Foot Mounted Planetary Reducer Gearbox manufacturer best Cost Custom Cheap wholesaler

There is a technological centre of province level, EPG academician functioning station, experiment station for EPG post doctors, and countrywide 863 software established up in EPG team. With these platforms and powerful technical ability, the a lot more than four hundred technicians have developed all selection of unique high exact and high strength merchandise, carried out mould packages for essential factors in the car and nationwide industry revitalizing plan, ensuing a lot more than 5000 developed more than, between which 33 objects are autonomous patent engineering with 4 patent approved . EPG is a specialist maker and exporter that is anxious with the design and style, development and production. We will give very best solutions and large top quality goods with all sincerity.

Stepless velocity Variator

Higher modularity
– Matched with a massive assortment of EPTes, they are appropriate to modular assembling of flanges, ft and torque arms.

Higher versaEPTty
– eleven dimensions, a lot more than two hundred versions, with broad variety of distinct mounting positions.

Large performances
– EPT from .18 kW to seven.5 kW.
– Max torque 3000 Nm.
– Up to 6000 Nm when mixed with EPTl helical EPTes.
– With the differential system, output pace can be brougEPT to quotzero quot velocity, when the motor is operating.

Substantial trustworthiness
– Strengthened box for large obligation apps.
– Planets and races are created in EPT metal 100Cr6 and are in oil bath, that ensure the greatest circumstances of EPT of the movement by friction.

The layout of UDL sequence stepless pace variator compromises the EPT EPT both at property and abroad. The merchandise incEPT the subsequent primary attributes:
1. Substantial pace-regulating precision: up to .five-one rotation.
2. Big pace -modifying assortment: The pace ratio ranges from 1:1.four to one:7 freely.
3. Substantial in strength and EPT in service lifestyle.
4. Handy to control the velocity.
5. Constant in managing, front-to-again in operating path, easy in driving, stable in performance and minimal in sounds.
6. Full in sealing and suited for any surroundings.
7. Compact in framework and modest in volume.
8. Created of high-good quality EPT alloy die forged into forming, excellent-hunting in visual appeal, ligEPT in weigEPT and it never will get rusty.
9. Great in adaptation: UDL series stepless velocity variators can be merged with all types of pace EPTs, as to attain reduced stepless pace altering.

FAQ
1, Q:what is actually your MOQ for udl velocity contorller ?
A: 1pc is okay for each kind electrical EPT box motor

two, Q: What about your guarantee for your stepless governor ?

A: one particular year ,but other than man-produced ruined

three, Q: which payment way you can settle for ?
A: TT, western union .

four, Q: how about your payment way ?
A: a hundred%payment EPTd less $5000 ,30% payment EPTd payment , 70% payment before sending above $5000.

5, Q: how about your EPT of speed reduction motor ?
A: plywood case ,if measurement is little ,we will pack with pallet for considerably less one particular container

6, Q: What information should be offered, if I acquire electric helical EPTed motor from you ?
A: rated EPT, ratio or output speed,kind ,voltage , mounting way , amount , if a lot more is better ,

in Qom Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Foot Mounted Planetary Reducer Gearbox manufacturer best Cost Custom Cheap wholesaler

in Qom Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Foot Mounted Planetary Reducer Gearbox manufacturer best Cost Custom Cheap wholesaler

in Dortmund Germany sales price shop near me near me shop factory supplier Gear Speed Reducer for Wind Turbines manufacturer best Cost Custom Cheap wholesaler

in Dortmund Germany sales price shop near me near me shop factory supplier Gear Speed Reducer for Wind Turbines manufacturer best Cost Custom Cheap wholesaler

Our major products are Needle Roller bearings, Cylindrical Roller Bearings, Rod stop Bearings, Spherical basic bearings, Monitor roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, H2o Pump Bearings, SNR Car Bearings and all sorts of Spherical Bearings. If you want any info or samples, make sure you speak to us and you will have our before long reply. Our products are created by present day computerized machinery and gear. planetary slewing speed EPT.

We have tqh08-eighteen sequence,the12-30 collection,hs70,hs160,hs200,hs380,hs450,hs600 sequence.
TQH08-eighteen Sequence

max.output torque N.m EPT ratio brake torque N.m EPT motor weigEPT KG
2500 seventy three.one hundred twenty five 190 ZM40 105

Modular design and style realizes variable blend.
#9830EPT is made of forged iron, which enhance it really is rigidity and anti-vibration
#9830EPT and planet EPTs are processed by cementite and hardening EPTs are processed by grinding, which enhance the effectiveness and lifetime of EPT models.
#9830Input mode: coaXiHu (West Lake) Dis.al enter, helical EPT input, EPTl- helical EPT enter
#9830Output mode: inner involute spline, hollow shaft with shrink disk, exterior involute spline, sound shaft with flat crucial
#9830Mounting mode: horizontal vertical, torque-arm
#9830WP collection sizes 9~34, EPT phase:two,three, ratio:25~4000, ratio will be more substantial in combination with WR, WK series.

in Dortmund Germany sales price shop near me near me shop factory supplier Gear Speed Reducer for Wind Turbines manufacturer best Cost Custom Cheap wholesaler

in Dortmund Germany sales price shop near me near me shop factory supplier Gear Speed Reducer for Wind Turbines manufacturer best Cost Custom Cheap wholesaler