Product Description
TECHNICAL DATA
MODEL MODELO MODELE |
Power Potencia Puissance |
RPM | n | n | n | cos | A | Nm | Ts/Tn | Tmax/Tn | Is/In | dB(A) | Kgs | |||
kw | hp | 1/min | % | 75% | 50% | 380V | 400V | 415V | ||||||||
YE3-801-2 | 0.75 | 1 | 2880 | 80.7 | 80.7 | 79.1 | 0.82 | 1.72 | 1.64 | 1.58 | 2.49 | 2.3 | 2.3 | 7 | 73 | 18.1 |
YE3-802-2 | 1.1 | 1.5 | 2880 | 82.7 | 82.7 | 81 | 0.83 | 2.43 | 2.31 | 2.23 | 3.65 | 2.2 | 2.3 | 7.3 | 73 | 19.5 |
YE3-90S-2 | 1.5 | 2 | 2895 | 84.2 | 84.2 | 82.5 | 0.84 | 3.22 | 3.06 | 2.95 | 4.95 | 2.2 | 2.3 | 7.6 | 76 | 23.3 |
YE3-90L-2 | 2.2 | 3 | 2895 | 85.9 | 85.9 | 84.2 | 0.85 | 4.58 | 4.35 | 4.19 | 7.26 | 2.2 | 2.3 | 7.6 | 77 | 27.1 |
YE3-100L-2 | 3 | 4 | 2895 | 87.1 | 87.1 | 85.4 | 0.87 | 6.02 | 5.71 | 5.51 | 9.9 | 2.2 | 2.3 | 7.8 | 79 | 38.8 |
YE3-112M-2 | 4 | 5.5 | 2905 | 88.1 | 88.1 | 86.3 | 0.88 | 7.84 | 7.45 | 7.18 | 13.1 | 2.2 | 2.3 | 8.3 | 80 | 48.3 |
YE3-132S1-2 | 5.5 | 7.5 | 2930 | 89.2 | 89.2 | 87.4 | 0.88 | 10.6 | 10.1 | 9.75 | 17.9 | 2 | 2.3 | 8.3 | 83 | 55.1 |
YE3-132S2-2 | 7.5 | 10 | 2930 | 90.1 | 90.1 | 88.3 | 0.88 | 14.4 | 13.7 | 13.2 | 24.4 | 2 | 2.3 | 7.9 | 84 | 69.2 |
YE3-160M1-2 | 11 | 15 | 2945 | 91.2 | 91.2 | 89.4 | 0.89 | 20.6 | 19.6 | 18.9 | 35.7 | 2 | 2.3 | 8.1 | 87 | 113 |
YE3-160M2-2 | 15 | 20 | 2945 | 91.9 | 91.9 | 90.1 | 0.89 | 27.9 | 26.5 | 25.5 | 48.6 | 2 | 2.3 | 8.1 | 87 | 123 |
YE3-160L-2 | 18.5 | 25 | 2940 | 92.4 | 92.4 | 90.6 | 0.89 | 34.2 | 32.5 | 31.3 | 60.1 | 2 | 2.3 | 8.2 | 90 | 142 |
YE3-180M-2 | 22 | 30 | 2955 | 92.7 | 92.7 | 90.8 | 0.89 | 40.5 | 38.5 | 37.1 | 71.1 | 2 | 2.3 | 8.2 | 90 | 182 |
YE3-200L1-2 | 30 | 40 | 2960 | 93.3 | 93.3 | 91.4 | 0.89 | 54.9 | 52.1 | 50.3 | 96.8 | 2 | 2.3 | 7.6 | 91 | 246 |
YE3-200L2-2 | 37 | 50 | 2960 | 93.7 | 93.7 | 91.8 | 0.89 | 67.4 | 64 | 61.7 | 119.4 | 2 | 2.3 | 7.6 | 91 | 265 |
YE3-225M-2 | 45 | 60 | 2965 | 94 | 94 | 92.1 | 0.9 | 80.8 | 76.8 | 74 | 144.9 | 2 | 2.3 | 7.7 | 93 | 323 |
YE3-250M-2 | 55 | 75 | 2970 | 94.3 | 94.3 | 92.4 | 0.9 | 98.5 | 93.5 | 90.2 | 176.9 | 2 | 2.3 | 7.7 | 93 | 413 |
YE3-280S-2 | 75 | 100 | 2975 | 94.7 | 94.7 | 92.8 | 0.9 | 134 | 127 | 122 | 240.8 | 1.8 | 2.3 | 7.1 | 94 | 546 |
YE3-280M-2 | 90 | 125 | 2975 | 95 | 95 | 93.1 | 0.9 | 160 | 152 | 146 | 288.9 | 1.8 | 2.3 | 7.1 | 94 | 569 |
YE3-315S-2 | 110 | 150 | 2978 | 95.2 | 95.2 | 93.3 | 0.9 | 195 | 185 | 179 | 352.8 | 1.8 | 2.3 | 7.1 | 94 | 897 |
YE3-315M-2 | 132 | 180 | 2978 | 95.4 | 95.4 | 93.5 | 0.9 | 234 | 222 | 214 | 423.3 | 1.8 | 2.3 | 7.1 | 95 | 1571 |
YE3-315L1-2 | 160 | 220 | 2980 | 95.6 | 95.6 | 93.7 | 0.91 | 279 | 265 | 256 | 512.8 | 1.8 | 2.3 | 7.2 | 95 | 1067 |
YE3-315L2-2 | 200 | 270 | 2980 | 95.8 | 95.8 | 93.9 | 0.91 | 349 | 331 | 319 | 640.9 | 1.8 | 2.2 | 7.2 | 95 | 1194 |
YE3-355M-2 | 250 | 340 | 2982 | 95.8 | 95.8 | 93.9 | 0.91 | 436 | 414 | 399 | 800.6 | 1.6 | 2.2 | 7.2 | 103 | 1685 |
YE3-355L-2 | 315 | 430 | 2982 | 95.8 | 95.8 | 93.9 | 0.91 | 549 | 522 | 503 | 1009 | 1.6 | 2.2 | 7.2 | 103 | 1734 |
MODEL MODELO MODELE |
Power Potencia Puissance |
RPM | η | η | η | cosφ | A | Nm | Ts/Tn | Tmax/Tn | Is/In | dB(A) | Kgs | |||
kw | hp | 1/min | % | 75% | 50% | 380V | 400V | 415V | ||||||||
YE3-801-4 | 0.55 | 0.75 | 1400 | 80.8 | 80.8 | 79.2 | 0.75 | 1.38 | 1.31 | 1.26 | 3.75 | 2.4 | 2.3 | 5.2 | 63 | 17.6 |
YE3-802-4 | 0.75 | 1 | 1420 | 82.5 | 82.5 | 80.9 | 0.75 | 1.84 | 1.75 | 1.69 | 5.04 | 2.3 | 2.3 | 6.6 | 63 | 18.4 |
YE3-90S-4 | 1.1 | 1.5 | 1445 | 84.1 | 84.1 | 82.4 | 0.76 | 2.61 | 2.48 | 2.39 | 7.27 | 2.3 | 2.3 | 6.8 | 66 | 24.2 |
YE3-90L-4 | 1.5 | 2 | 1445 | 85.3 | 85.3 | 83.6 | 0.77 | 3.47 | 3.3 | 3.18 | 9.91 | 2.3 | 2.3 | 7 | 66 | 29.7 |
YE3-100L1-4 | 2.2 | 3 | 1450 | 86.7 | 86.7 | 85 | 0.81 | 4.76 | 4.52 | 4.36 | 14.6 | 2.3 | 2.3 | 7.6 | 68 | 41.5 |
YE3-100L2-4 | 3 | 4 | 1450 | 87.7 | 87.7 | 85.9 | 0.82 | 6.34 | 6.02 | 5.8 | 20 | 2.3 | 2.3 | 7.6 | 68 | 46 |
YE3-112M-4 | 4 | 5.5 | 1450 | 88.6 | 88.6 | 86.8 | 0.82 | 8.37 | 7.95 | 7.66 | 26.5 | 2.2 | 2.3 | 7.8 | 72 | 63.2 |
YE3-132S-4 | 5.5 | 7.5 | 1460 | 89.6 | 89.6 | 87.8 | 0.83 | 11.2 | 10.7 | 10.3 | 36 | 2 | 2.3 | 7.9 | 74 | 71.2 |
YE3-132M-4 | 7.5 | 10 | 1460 | 90.4 | 90.4 | 88.6 | 0.84 | 15 | 14.3 | 13.7 | 49.1 | 2 | 2.3 | 7.5 | 77 | 85.1 |
YE3-160M-4 | 11 | 15 | 1465 | 91.4 | 91.4 | 89.6 | 0.85 | 21.5 | 20.4 | 19.7 | 71.7 | 2.2 | 2.3 | 7.7 | 78 | 121 |
YE3-160L-4 | 15 | 20 | 1465 | 92.1 | 92.1 | 90.3 | 0.86 | 28.8 | 27.3 | 26.3 | 97.8 | 2.2 | 2.3 | 7.8 | 82 | 142 |
YE3-180M-4 | 18.5 | 25 | 1470 | 92.6 | 92.6 | 90.7 | 0.86 | 35.3 | 33.5 | 32.3 | 120.2 | 2 | 2.3 | 7.8 | 82 | 181 |
YE3-180L-4 | 22 | 30 | 1470 | 93 | 93 | 91.1 | 0.86 | 41.8 | 39.7 | 38.3 | 142.9 | 2 | 2.3 | 7.8 | 82 | 209 |
YE3-200L-4 | 30 | 40 | 1475 | 93.6 | 93.6 | 91.7 | 0.86 | 56.6 | 53.8 | 51.8 | 194.2 | 2 | 2.3 | 7.3 | 84 | 284 |
YE3-225S-4 | 37 | 50 | 1485 | 93.9 | 93.9 | 92 | 0.86 | 69.6 | 66.1 | 63.7 | 237.9 | 2 | 2.3 | 7.4 | 85 | 328 |
YE3-225M-4 | 45 | 60 | 1485 | 94.2 | 94.2 | 92.3 | 0.86 | 84.4 | 80.2 | 77.3 | 289.4 | 2 | 2.3 | 7.4 | 86 | 363 |
YE3-250M-4 | 55 | 75 | 1485 | 94.6 | 94.6 | 92.7 | 0.86 | 103 | 97.6 | 94.1 | 353.7 | 2.2 | 2.3 | 74 | 86 | 442 |
YE3-280S-4 | 75 | 100 | 1486 | 95 | 95 | 93.1 | 0.88 | 136 | 139 | 125 | 482 | 2 | 2.3 | 6.9 | 89 | 569 |
YE3-280M-4 | 90 | 125 | 1486 | 95.2 | 95.2 | 93.3 | 0.88 | 163 | 155 | 149 | 578.4 | 2 | 2.3 | 6.9 | 89 | 639 |
YE3-315S-4 | 110 | 150 | 1488 | 95.4 | 95.4 | 93.5 | 0.89 | 197 | 187 | 180 | 706 | 2 | 2.2 | 7 | 89 | 939 |
YE3-315M-4 | 132 | 180 | 1488 | 95.6 | 95.6 | 93.7 | 0.89 | 236 | 224 | 216 | 847.2 | 2 | 2.2 | 7 | 92 | 1033 |
YE3-315L1-4 | 160 | 220 | 1488 | 95.8 | 95.8 | 93.9 | 0.89 | 285 | 271 | 261 | 1571 | 2 | 2.2 | 7.1 | 92 | 1126 |
YE3-315L2-4 | 200 | 270 | 1490 | 96 | 96 | 94.1 | 0.9 | 352 | 334 | 322 | 1282 | 2 | 2.2 | 7.1 | 92 | 1238 |
YE3-355M-4 | 250 | 340 | 1490 | 96 | 96 | 94.1 | 0.9 | 440 | 418 | 403 | 1602 | 2 | 2.2 | 7.1 | 101 | 1830 |
YE3-355L-4 | 315 | 430 | 1490 | 96 | 96 | 94.1 | 0.9 | 554 | 526 | 507 | 2019 | 2 | 2.2 | 7.1 | 101 | 1950 |
MATERIAL DESCRIPTION
OUR CERTIFICATE
FACTORY SHOW
OUR COMPANY
FANCY PUMP (ZHangZhouG) CO LTD located in HangZhou City, ZHangZhoug Province, specializes in producing and operating various water pumps and spare parts. The company’s traditional & core business is the production of various types of pumps for different industries, such as households, buildings, gardens, HVAC, fire fighting and sewage, etc. Fancy Pump is widely used in agriculture irrigation, garden watering, HVAC, pipeline pressurization, building water supply, residential & commercial community, fire fighting, industrial wastewater treatment, sewage water treatment, etc.
FANCY WATER PUMP PRODUCTS
COMMERCIAL PUMP | INDUSTRIAL PUMP | CIRCULATION PUMP | SURFACE PUMP |
domestic water pump price | industrial pump | hot water pump | surface water pump |
domestic water pump | centrifugal pump | swimming pool circulation pump | surface pump |
domestic monoblock pump | electric motor pump | circulation pump | self-priming pump |
household water pumps | suction pumps | water circulation pump | vortex pump |
domestic water pumps for sale | centrifugal water pump | circulation pump | surface well pump |
domestic water motor | multistage pump | water circulation pump | surface mounted water pump |
1 hp domestic water pump | suction water pump | pool circulation pump | shallow water pump |
domestic pump price | centrifugal pump price | recirculating pump | self priming water pump |
domestic water booster pump | horizontal pump | heating circulation pump | surface bore pump |
best domestic water pump | centrifugal pump | small water circulation pump | self priming centrifugal pump |
SUBMERSIBLE PUMP | BOREHOLE PUMP | POOL PUMP | FIRE PUMP |
submersible pump | solar pumping system | swimming pool water pump | diesel water pump |
submersible pump price | solar water pump | swimming pool pump | diesel engine pump |
submersible water pump | borehole water pump | swimming pool filter pump | fire pump |
submersible motor pump | solar motor pump | swimming pool motor pump | fire fighting system |
electric submersible pump | solar pump | swimming pump | firefighter pumps |
submersible pump | solar borehole pumps prices | outdoor pool pump | fire pump price |
submersible well water pump | solar borehole pumps | swimming pool pumps for sale | fire pump |
best submersible pump | submersible borehole water pump | best swimming pool pump | jockey pump |
sewage pump | submersible borehole pumps | swimming pool circulation pump | fire fighting system |
submersible drainage pump | well pump | solar swimming pool pump | diesel pump set |
PART OF OUR PRODUCTS
FAQ
1. Q: What is the minimum order amount?
A:$5000.
2. Q: Can you provide OEM service?
A: Yes.
3. Q: What are your payment terms?
A:30% T/T deposit by TT in advance, balance before delivery.
4. Q: What is the warranty of the product?
A: 2 years after purchasing our pump.
5. Q: What is the delivery time?
A: 30-45 after we receive your deposit.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | 2 Years |
---|---|
Warranty: | 2 Years |
Max.Head: | >150m |
Max.Capacity: | >400 L/min |
Driving Type: | Motor |
Material: | Stainless Steel |
Samples: |
US$ 9000/Piece
1 Piece(Min.Order) | |
---|
editor by CX 2024-04-10
China factory CHINAMFG AC Motor Gear Motor Synchronous Electric Single Phase vacuum pump for ac
Product Description
Certifications
Packaging & Shipping
FAQ
Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of molds are necessory to be developped which may need exact cost and design charging.
Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machine Tool |
---|---|
Speed: | Low Speed |
Number of Stator: | Single-Phase |
Samples: |
US$ 25/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
|
|
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
editor by CX 2024-04-03
China Custom Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors vacuum pump and compressor
Product Description
Single Phase AC Motor Induction Electric Engine Two Speed Industrial Series Synchronous Asynchronous Step 220V Machine Drive for Fans Blowers AC Single Motors
Application of AC Motor
AC motors are used in a wide variety of applications, including:
- Pumps: AC motors are used to power pumps in a variety of applications, such as water, sewage, and chemical processing.
- Fans: AC motors are used to power fans in a variety of applications, such as ventilation, air conditioning, and refrigeration.
- Compressors: AC motors are used to power compressors in a variety of applications, such as air conditioning, refrigeration, and food processing.
- Conveyors: AC motors are used to power conveyors in a variety of applications, such as manufacturing, packaging, and distribution.
- Machine tools: AC motors are used to power machine tools in a variety of applications, such as milling, turning, and drilling.
- Elevators: AC motors are used to power elevators in a variety of applications, such as residential, commercial, and industrial buildings.
- Wind turbines: AC motors are used to power wind turbines in a variety of applications, such as generating electricity and providing backup power.
- Electric vehicles: AC motors are used to power electric vehicles in a variety of applications, such as cars, trucks, and buses.
AC motors are a versatile type of motor that can be used in a wide variety of applications. They are characterized by their high efficiency, reliability, and low maintenance. AC motors are also relatively inexpensive, making them a good choice for a wide range of applications.
Here are some of the advantages of using AC motors:
- High efficiency: AC motors are more efficient than other types of motors, such as DC motors. This is because AC motors can operate at a wider range of speeds and loads.
- Reliability: AC motors are more reliable than other types of motors. This is because AC motors have fewer moving parts and are less prone to wear and tear.
- Low maintenance: AC motors require less maintenance than other types of motors. This is because AC motors have fewer moving parts and are less prone to wear and tear.
- Inexpensive: AC motors are relatively inexpensive than other types of motors. This is because AC motors are mass-produced and are available in a wide range of sizes and configurations.
Overall, AC motors are a versatile, efficient, reliable, and inexpensive type of motor that can be used in a wide range of applications.
As the power requirements of single load systems are usually small, all our homes, offices are supplied with a single-phase A.C. supply only. To get proper working conditions using this single-phase supply, compatible motors have to be used. Besides being compatible, the motors have to be economical, reliable and easy to repair. One can find all of these characteristics in a single phase induction motor readily. Similar to three-phase motors but with some modifications, single-phase induction motors are a great choice for domestic appliances. Their simple design and low cost have attracted many applications.
Single-phase induction motors are the simple motors which operate on single -phase A.C. and in which torque is produced due to induction of electricity caused by the alternating magnetic fields
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Industrial |
---|---|
Speed: | – |
Number of Stator: | – |
Function: | Driving |
Casing Protection: | – |
Number of Poles: | – |
Samples: |
US$ 999/Piece
1 Piece(Min.Order) | |
---|
editor by CX 2024-04-02
China Best Sales Small AC Motor 1 Phase Speed Controller AC Synchronous Motor vacuum pump electric
Product Description
Y2 10HP 15HP 20HP 25HP 30HP 40HP 50HP 60HP Three 3 Phase AC induction electric Motor
Recommendation
Product Description
Model | kw | HP | Current | Speed | Eff | Power Factor | Tst/Tn | Ist/In | Tmax/Tn |
Y2-90L-4 | 1.5 | 2 | 3.65A | 1400 rpm | 79% | 0.79 | 2.3 | 6.5 | 2.3 |
Company Profile
FAQ
- There are other factors that cause motor vibration and noise!
Axial vibration and noise of end caps
The axial vibration of the end cover is 1 of the sources of mechanical noise, which is mainly excited by the bearing vibration, which is more important in small motors. The smaller the axial dynamic stiffness of the end cover, the easier it is to excite larger vibration speed and noise.
Vibration and noise of the brush unitThe vibration and noise of the brush device are caused by the poor surface condition of the commutator, the large gap between the brush and the brush holder, the small brush pressure or the improper pressure application which makes the brush skew, and the brush holder, brush holder and brush rod. It is caused by structural and technological reasons such as insufficient stiffness.
When the DC motor is running, the sliding contact condition of the brush and the commutator, as well as the cuprous oxide film formed on the surface of the commutator and a layer of graphite film and dust particles covered on it, not only affect the commutation performance of the motor, but also affect the commutation performance of the motor. to vibration and noise.
Practice has proved that due to the low temperature of the sliding contact surface at no load, the above-mentioned film is not easy to form, and the dry friction between the brush and the commutator increases the noise. For example, when the no-load operation cycle of the rolling DC motor accounts for more than 50% of the total time, the noise under no-load conditions is 6~10dB higher than that under load. This vibration is different from the vibration of the commutator surface due to mechanical reasons, which can be detected when the motor is running at low speed (vibration is felt when the brush is touched by hand). The frequency spectrum of brush vibration noise generated by sliding contact is generally in the range of 1000~-8000Hz, and it does not change much when the motor speed changes, which is 1 of the characteristics that distinguish it from mechanical reasons.
The brush vibration noise produced by the sliding contact is also related to the brush polarity. For example, the positive brush of a DC generator has less vibration than the negative brush; because the positive brush can separate graphite and carbon crystals, absorb moisture on the surface of the commutator to form a lubricating film, and the negative brush removes it. The formation of the sliding contact film is also related to the grade of the brush. The selection of the grade is first to ensure good commutation performance, but at the same time, the vibration and noise of the brush should also be considered.
In addition to mechanical noise, aerodynamic noise is also a major problem in motor noise control. Especially for high-speed motors, this problem is relatively concentrated. In the tweet after bearing, Ms. participated in the meeting and chose some content to share with you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Industrial |
---|---|
Speed: | Constant Speed |
Number of Stator: | Three-Phase |
Function: | Driving |
Casing Protection: | Protection Type |
Number of Poles: | 4 |
Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
editor by CX 2024-03-27
China Professional Ka180-M48015 AC Synchronous Servo Three Phase Electric Motor for Machine Tools vacuum pump distributors
Product Description
Product Description
- Motor Features
- Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)
- Equipped with high resolution encoder (23-bit absolute encoder)
- Maximum torque 3
M23015 M28415 M35015 M48015 Rated power (kW) 2.9 3.6 4.4 5.5 7.5 Rated torque (N.m) 18.6 23 28.4 35 48 Maximum instantaneous torque (N.m) 55.8 69 85.2 105 144 Rated speed (rpm) 1500 1500 1500 1500 1500 Maximum speed (rpm) 3000 3000 3000 3000 3000 Rated current (A) 17 24 28 38 45 Maximum instantaneous current (A) 51 72 84 114 135 Rotor inertia (kg*cm^2) 51.89 64.51 73.78 104.94 144.59 Weight(Kg)(Without brake) 15.3 17.5 19.2 25.5 32.5 Pole pairs 5 Adapted driver work voltage (VAC) 220 Insulation class F Protection level IP67 Installation type Flange mounting Environment Temperature -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing) Humidity 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation) Air Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust Vibration Vibration speed below 0.5mm/s LL Without brake 191 206 216 251 296 With brake 226 241 251 286 331 L1 79 79 79 113 113 L2 63 63 63 90 90 D 35 35 35 42 42 W 10 10 10 12 12 T 8 8 8 8 8 G 30 30 30 37 37 *Note: We can manufacture products according to customer’s requirements.
Motor characteristic curve
A:Continuous work area;B:Short-term work areaCompany Profile
ZheJiang KND Automation Technology CO.,Ltd
ABOUT US
ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
PRODUCT DISTRIBUTION
CNC system Robot controller Universal automation controller
Servo drives Servo motors KWS Industrial Interconnection
MOTOR OVERVIEW
K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.
ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.
ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.
FAQ
Payments
1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.Application: Universal, Industrial Operating Speed: Constant Speed Operation Mode: Electric Motor Magnetic Structure: Permanent Magnet Function: Driving Structure: Rotating Pole Type (Armature Fixed)
editor by CX 2023-11-17
China supplier Ka90-M03330 AC Synchronous Servo Three Phase Electric Motor for Machine Tools with high quality
Product Description
Product Description
- Motor Features
- Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)
- Equipped with high resolution encoder (23-bit absolute encoder)
- Maximum torque 300%, stronger overload capacity
- The protection level is increased to IP67
- The vibration level is raised to A level
- Motor heating is reduced by 20%
- 380V motor, rated speed improved
Model Explanation
Wiring
23/25-bit Absolute Encoder Socket
9-core: applicable for KA60/KA80 /KA90 series
Signal | 5V | 0V | SD+ | SD- | E+ | E- | FG |
Core No. | 8 | 6 | 5 | 4 | 3 | 2 | 1 |
Parameters of Motor Equipped with Power-off Brake
Frame NO. | Rated torque | Rated voltage | Rated current | Rated power | Increased weight |
60 Series | 3.3 Nm | DC24V | 0.48A±10% | 11.5W | 0.8Kg |
Detailed Photos
Model | KA90 | |
M03330 | ||
Rated power (kW) | 1 | |
Rated torque (N.m) | 3.3 | |
Maximum instantaneous torque (N.m) | 9.9 | |
Rated speed (rpm) | 3000 | |
Maximum speed (rpm) | 5000 | |
Rated current (A) | 5.2 | |
Maximum instantaneous current (A) | 15.6 | |
Rotor inertia (kg*cm^2) | 4.78 | |
Weight(Kg)(Without brake) | 4.2 | |
Pole pairs | 5 | |
Adapted driver work voltage (VAC) | 220 | |
Insulation class | F | |
Protection level | IP67 | |
Installation type | Flange mounting | |
Environment | Temperature | -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing) |
Humidity | 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation) | |
Air | Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust | |
Vibration | Vibration speed below 0.5mm/s | |
LL | Without brake | 140 |
With brake | 180 |
*Note: We can manufacture products according to customer’s requirements.
Motor characteristic curve
A:Continuous work area;B:Short-term work area
Company Profile
ZheJiang KND Automation Technology CO.,Ltd
ABOUT US
ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
PRODUCT DISTRIBUTION
CNC system Robot controller Universal automation controller
Servo drives Servo motors KWS Industrial Interconnection
MOTOR OVERVIEW
K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.
ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.
ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.
FAQ
Payments
1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.
If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.
Application: | Universal, Industrial |
---|---|
Operating Speed: | Constant Speed |
Operation Mode: | Electric Motor |
Magnetic Structure: | Permanent Magnet |
Function: | Driving |
Structure: | Rotating Pole Type (Armature Fixed) |
editor by CX 2023-11-16
China factory Y Asynchronous Synchronous AC Electric Motor vacuum pump brakes
Product Description
Type: Y Asynchronous Synchronous AC Electric Motor
This series of motors are specially used as prime movers for various fans of large thermal power equipment, such as exhaust fans, induced draft fans, blowers, etc.
Efficiency level: High efficiency energy-saving
Rated output: 150~8000 kW
Rated voltage: 3000V, 3300V, 4160V, 6000V, 6300V, 6600V, 10000V
Rated frequency (speed):
50Hz (3000/1500/1000/750/600/500/425/375/325 r/min)
60Hz (3600/1800/1200/900/720/600/500/450/400 r/min)
No. of poles: 2P, 4P, 6P, 8P, 10P, 12P, 14P, 16P, 18P
Mounting methods: Horizontal foot mounted IM1001 (B3)
Material of frame/housing: Fabricated in welded steel plate frame
Frame size: 355~800 frame
Service Factor: 1.00
Insulation Class: F (155ºC)
Temp. Rising: ΔT=80°K
Bearing type: Roller/Ball bearing
Working Duty: S1 (Continuous)
Ambient Temperature: -20°C ~ 40°C
Altitude: <=1000 m.a.s.l
Ambient humidity: <=90%
Protection Class: IP44, IP54, IP55
Cooling: IC611 Self-ventilated with air-to-air heat exchanger, heat exchanger on top of motor
Lubricating: Grease lubricated bearings
Grounding lug: On the frame and terminal box
Temperature detector: PT100
Material of nameplate: Stainless steel
Metric Threaded Cable Entries on the Terminal Box
Application: | Industrial |
---|---|
Operating Speed: | Constant Speed |
Number of Stator: | Three-Phase |
Species: | Y, Y2 Series Three-Phase |
Rotor Structure: | Squirrel-Cage |
Casing Protection: | Closed Type |
Customization: |
Available
|
|
---|
editor by CX 2023-10-23
China Standard Kc130-M15020 (Z) AC Synchronous Servo Three Phase Electric Motor for Machine Tools with Great quality
Product Description
Product Description
- Motor Features
- Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)
- Equipped with high resolution encoder (23-bit absolute encoder)
- Maximum torque 300%, stronger overload capacity
- The protection level is increased to IP67
- The vibration level is raised to A level
- Motor heating is reduced by 20%
- 380V motor, rated speed improved
Model Explanation
Wiring
Power Socket
4-core: Sockets of KA110/ KA130/KD130 series are universal
Winding | U | V | W | PE |
Core No. | 2 | 3 | 4 | 1 |
4-core: applicable for 110/130 throwing line series
Winding | U | V | W | PE |
Core No. | 2 | 3 | 4 | 1 |
23/25-bit Absolute Encoder Socket
7-core: applicable for KA110/KA130/KD130/KA180/KD180 serie
Signal | 5V | SD+ | 0V | SD- | E+ | E- | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
7-core:applicable for 110/130 throwing line series
Signal | 5V | SD+ | 0V | SD- | E+ | E- | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
17-bit Absolute Encoder Socket
10-core:applicable for KA110/KA130 serie
Signal | 5V | 485+ | GND | 485- | Battery + |
Battery GND |
FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 10 |
Resolver Socket
7-core:applicable for KD130 series
Signal | SIN- | SIN+ | COS- | COS+ | EXC- | EXC+ | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
Power off Brake Socket
2-core: socket of 110/130/180 series are universa
Signal | DC24V(Non-polar) | |
Core No. | 1 | 2 |
2-core: applicable for 110/130 throwing line series
Signal | DC24V(Non-polar) | |
Core No. | 1 | 2 |
Parameters of Motor Equipped with Power-off Brake
Frame NO. | Rated torque | Rated voltage | Rated current | Rated power | Increased weight |
130 Series | 12 Nm | DC24V | 0.69A±10% | 16.5W | 1.06Kg |
Specification & Dimension
Model | KC130 | KC130 | KC130 | KC130 | |
M06571Z | M08420Z | M11520Z | M15571Z | ||
Rated power (kW) | 1.2 | 1.7 | 2.4 | 3.1 | |
Rated torque (N.m) | 6 | 8.4 | 11.5 | 15 | |
Maximum instantaneous torque (N.m) | 18 | 25.2 | 34.5 | 45 | |
Rated speed (rpm) | 2000 | 2000 | 2000 | 2000 | |
Maximum speed (rpm) | 4000 | 4000 | 4000 | 4000 | |
Rated current (A) | 4.5 | 6.0 | 7.0 | 9.0 | |
Maximum instantaneous current (A) | 13.5 | 18.0 | 21.0 | 27.0 | |
Rotor inertia (kg*cm^2) | 14.88 | 21.45 | 31.55 | 41.45 | |
Weight(Kg) | 7.6 | 9.2 | 11.1 | 13.3 | |
Pole pairs | 5 | ||||
Adapted driver work voltage (VAC) | 380 | ||||
Insulation class | F | ||||
Protection level | IP67 | ||||
Installation type | Flange mounting | ||||
Environment | Temperature | -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing) | |||
Humidity | 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation) | ||||
Air | Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust | ||||
Vibration | Vibration speed below 0.5mm/s | ||||
LL | With brake | 160 | 177 | 216 | 246 |
D | 22 | 22 | 24 | 24 | |
W | 6 | 6 | 8 | 8 | |
T | 6 | 6 | 7 | 7 | |
G | 18.5 | 18.5 | 20 | 20 |
*Note: We can manufacture products according to customer’s requirements.
Motor characteristic curve
A:Continuous work area;B:Short-term work area
Company Profile
ZheJiang KND Automation Technology CO.,Ltd
ABOUT US
ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
PRODUCT DISTRIBUTION
MOTOR OVERVIEW
K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.
ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.
ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.
FAQ
Payments
1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.
If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.
Application: | Universal, Industrial |
---|---|
Operating Speed: | Constant Speed |
Operation Mode: | Electric Motor |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
editor by CX 2023-10-20
China best Ka130-M05430 AC Synchronous Servo Three Phase Electric Motor for Machine Tools vacuum pump ac system
Product Description
Product Description
- Motor Features
- Five pairs of poles, smaller volume (80% of the volume of the original 4 pairs of poles ST series motor)
- Equipped with high resolution encoder (23-bit absolute encoder)
- Maximum torque 300%, stronger overload capacity
- The protection level is increased to IP67
- The vibration level is raised to A level
- Motor heating is reduced by 20%
- 380V motor, rated speed improved
Wiring
Power Socket
4-core: Sockets of KA110/ KA130/KD130 series are universal
Winding | U | V | W | PE |
Core No. | 2 | 3 | 4 | 1 |
4-core: applicable for 110/130 throwing line series
Winding | U | V | W | PE |
Core No. | 2 | 3 | 4 | 1 |
23/25-bit Absolute Encoder Socket
7-core: applicable for KA110/KA130/KD130/KA180/KD180 serie
Signal | 5V | SD+ | 0V | SD- | E+ | E- | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
7-core:applicable for 110/130 throwing line series
Signal | 5V | SD+ | 0V | SD- | E+ | E- | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
17-bit Absolute Encoder Socket
10-core:applicable for KA110/KA130 serie
Signal | 5V | 485+ | GND | 485- | Battery + |
Battery GND |
FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 10 |
Resolver Socket
7-core:applicable for KD130 series
Signal | SIN- | SIN+ | COS- | COS+ | EXC- | EXC+ | FG |
Core No. | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
Power off Brake Socket
2-core: socket of 110/130/180 series are universa
Signal | DC24V(Non-polar) | |
Core No. | 1 | 2 |
2-core: applicable for 110/130 throwing line series
Signal | DC24V(Non-polar) | |
Core No. | 1 | 2 |
Parameters of Motor Equipped with Power-off Brake
Frame NO. | Rated torque | Rated voltage | Rated current | Rated power | Increased weight |
130 Series | 12 Nm | DC24V | 0.69A±10% | 16.5W | 1.06Kg |
Specification & Dimension
Model | KA130 | KA130 | KA130 | KA130 | KA130 | KA130 | KA130 | KA130 | |
M05415 | M06415 | M08415 | M10015 | M11515 | M15015 | M571 | M08430 | ||
Rated power (kW) | 0.85 | 1.0 | 1.3 | 1.6 | 1.8 | 2.3 | 1.7 | 2.6 | |
Rated torque (N.m) | 5.4 | 6.4 | 8.4 | 10 | 11.5 | 15 | 5.4 | 8.4 | |
Maximum instantaneous torque (N.m) | 16.2 | 19.2 | 25.2 | 30 | 34.5 | 45 | 16.2 | 25.2 | |
Rated speed (rpm) | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 3000 | 3000 | |
Maximum speed (rpm) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 4000 | 4000 | |
Rated current (A) | 6.5 | 7.8 | 8.5 | 10.5 | 12.5 | 15.5 | 6.5 | 9.5 | |
Maximum instantaneous current (A) | 19.5 | 23.4 | 25.5 | 31.5 | 37.5 | 46.5 | 19.5 | 28.5 | |
Rotor inertia (kg*cm^2) | 12.58 | 12.58 | 18.59 | 25.31 | 32.37 | 42.97 | 18.59 | 32.37 | |
Weight(Kg)(Without brake) | 5.7 | 5.7 | 7.2 | 8.8 | 10.5 | 13.0 | 7.2 | 10.5 | |
Pole pairs | 5 | ||||||||
Adapted driver work voltage (VAC) | 220 | ||||||||
Insulation class | F | ||||||||
Protection level | IP67 | ||||||||
Installation type | Flange mounting | ||||||||
Environment | Temperature | -15~40ºC (no freezing) ,Storage temperature: -15~70ºC (no freezing) | |||||||
Humidity | 80%RH below (no condensation) ,Storage humidity: 90%RH below (no condensation) | ||||||||
Air | Indoor (no direct sunlight), no corrosive and flammable gas, no oil mist and dust | ||||||||
Vibration | Vibration speed below 0.5mm/s | ||||||||
LL | Without brake | 145 | 145 | 162 | 181 | 201 | 231 | 162 | 201 |
With brake | 172 | 172 | 189 | 208 | 228 | 273 | 189 | 228 |
*Note: We can manufacture products according to customer’s requirements.
Motor characteristic curve
A:Continuous work area;B:Short-term work area
Company Profile
ZheJiang KND Automation Technology CO.,Ltd
ABOUT US
ZheJiang KND CNC Technique Co.LTD(KND) was established in 1993.It is a joint-stock private enterprise that is the earliest 1 focusing on the research,production,sales and service of CNC system in China.It has the qualification of national high-tech enterprise,and it is 1 of the largest CNC system brand in China.
KND has the core technology of self-research and possesses independent intellectual property rights. After 30 years’ development, it has a number of series products: CNC system, robot controller, automation controller, feed driver and motor, spindle driver and motor, industrial Internet.These products can meet the application requirements of CNC lathes, CNC milling machines, machining centers,grinding machines and other industrial equipments.It can also be used in industrial robots, truss robots, workshop networking,data collection and analysis,and other automation fields.So,KND provided a full range of choices for different kinds of clients.
PRODUCT DISTRIBUTION
CNC system Robot controller Universal automation controller
Servo drives Servo motors KWS Industrial Interconnection
MOTOR OVERVIEW
K series synchronous servo motor is a high-performance five-pole motor developed by KND;its power ranges from 0.2kW to 7.5kW and its frame includes 60, 80, 90, 110,130, 180 series. The kind of products have the characteristics of small size, high power, high speed, better encoder configuration, and strong overload capacity.If it is used with the SD510 series driver of KND, it can make the position control come true quickly and accurately.This combination can be applied in a variety of occasions which have a higher requirements for precision control.
ZJY (-K) series AC spindle servo motor used for CNC machine tools has the characteristics of compact structure,long service life,small moment of inertia and higher control accuracy. Combined with ZD210 series of new spindle servo driver, can make its performance get better display.It can be widely used in various CNC machine tools and it can also be the spindle,feed and other parts of the CNC mechanical products.
ZJY (-K) series spindle servo motor’s parameters showed below, rated power: range from 3.7kW to 37kW, rated voltage: 380V, rated frequency: 25, 33.3, 50, 66.67, 83.33Hz, rated speed: 750, 1000, 1500,2000, 2500r/ min.The maximum speed can reach 12000r/ min. The working system of the motor is S1, the protection level is IP54, and the insulation level is F. There are thermal element in the interior of motors., this kind of moter lose heat by a independent fan.You can choose a motor with a photoelectric encoder or a rotary transformer,that depends on your needs.
FAQ
Payments
1) We can accept EXW, FOB
2) Payment must be made before shipment.
3) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Shipping
1) We only ship to your confirmed address. Please make sure your shipping address is correct before purchase.
2) Most orders will be shipped out within 3-7 working days CHINAMFG payment confirmation.
3) Shipping normally takes 7-25 working days. Most of the items will delivery in 2 weeks, while there will be a delay for something we cannot control (such as the bad weather). If it happens, just contact us, we will help you check and resolve any problem.
3) Please check the package CHINAMFG receipt, if there are some damages, please contact us immediately.
Feedback & Refund
1) Feedback is important to us, if you have any problem with our products, please contact us, our technician will give you useful advises.
2) When you have the parcel and not satisfied with the goods or it is other problem, please tell us immediately, and provide us a photo showing the detail.
3) Any reason requiring for all refund. Items must be in original condition and no physical damage. Buyer responsible for all shipping cost.
If you need more information, please contact with us. We will attach great importance to your any problems.
Hope we could establish a long-term effective cooperation.
Application: | Universal, Industrial |
---|---|
Operating Speed: | Constant Speed |
Operation Mode: | Electric Motor |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
editor by CX 2023-10-20
China Standard Explosion Proof Flameproof Asynchronous Synchronous AC DC Electrical Induction Electric Motor with Hot selling
Product Description
Asynchronous Synchronous AC DC Yrkk Induction Electric Motor
ZheJiang ELECTRIC
Produce Synchronous AC/ DC Yrkk ZZJ Z4 Z Induction Electric Motor
Power from 10-1000kw 5000kw-50000kw 50mw – 100mw .
Deeply appreciate your enquiry, We are biggest of chinese company 30 years experiences,1000 workers with 10 billion USD turnover in ZheJiang china .Welcome your visiting !! |
Series Z4 d-c machines are newly developed products of our works. The products are found wide use for prime mover in various, sucb as mill auxilinry in merallurgical induetry, metal cutting machine-tool, paper making, print, textile, printing and dyeing, cement-making, plastic extruding machine, etc. |
Outline and mounting dimensions of the motors comply with IEC72 Standard, except for the axial distance between the mounting holes (dimension B).
Performance and technical requirements of the motors can be checked in accordance with IEC34-1 Standard of the International Electro technical Commission, or DIN57530 Norm of the Deutsche Industries-Norm.
The motors are class F insulated, with reliable insulating construction and impregnating process, cnsuring stable dielectric performance and excellent heat dissipation. The motors possess the features of small size, good performance, light weight, large output, high efficiency and reliability, being able to match the current international advanced level. The motors can be lastingly operated form fully controlled three-phase bridge without a smoothing reactor. Motors for 160V may be operated on single-phase bridge thyristor. In that case, a smoothing reactor, whose inductance is specified in the relevant technical date, should be inserted in the armature circult to suppres ripple current. |
Application: | Industrial |
---|---|
Speed: | Low Speed |
Number of Stator: | Three-Phase |
Function: | Driving, Control |
Casing Protection: | Closed Type |
Number of Poles: | 6 |
Customization: |
Available
|
|
---|
editor by CX 2023-10-20